Újraindítás szükségesAUTOMATIKUSAN TELEPÍTETTEz a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
This package provides the Windows/DOS based Seagate Barracuda ST31000524AS/ST3320413AS/ST3500413AS/ST3250312AS Firmware Update and is supported on the OptiPlex, XPS Desktop, Alienware Desktop, Inspiron Desktop, Precision, Vostro Desktop and Dimension models that are running the following Windows and DOS Operating Systems.
Ajánlott
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.
Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót.Mutasd meg, hogyan!
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet.A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
Fixes - Not Applicable.
Enhancements - Enhanced performance and reliability.
A Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Fájlformátum:Kibontja a fájlokat közvetlenül a helyi lemezre
Fájlnév:B765JC49.zip
Fájlméret:11.45 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Windows based firmware update for ST3320413AS/ST3500413AS/ST31000524AS: 1. Download and unzip "B765JC49.zip" into your desktop. 2. In "B765JC49" folder, please search for the "Windows" folder. 3. Double click "B7032100.EXE" and it will begin to run. On the first screen you will select your language, and then select "OK". The next screen is a warning screen, please read and select "Next" if you agree. The next screen is the License Agreement screen. If you agree, click "I agree" and then click "Next". 4. You will then come to the screen that asks you to close and save all applications and to back up your data. When you are ready to start the firmware update, please check the "Begin firmware update procedure", and then click "Proceed". 5. The system will reboot and load the firmware. Once the firmware update is complete the system will boot up into Windows normally.
DOS based firmware update for ST3250312AS/ST3320413AS/ST3500413AS/ST31000524AS: 1. Unzip "B765JC49.zip" into your bootable USB key. Boot up the computer with USB key. 2. In "Dos" folder, just type "JC49.BAT" at the DOS prompt and press the enter key. 3. Your system will now start updating the HDD firmware. Once the firmware update is completed, your system will display a "DRIVE PASSED" message. If you already have the correct JC49 firmware on your hard drive, you will get a "This drive already has this firmware. DRIVE FAILED TO LOAD the TARGET CODE" message. 4. Remove your USB key, and turn off your system using the computers power button. Once the computer has been powered down, you can now turn the computer on normally.
Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok