Seagate SATA ST2000NM0011, ST1000NM0011 and ST500NM0011 firmware version PA08

AUTOMATIKUSAN TELEPÍTETT Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
This release contains firmware version PA08 for Seagate SATA (7200 rpm 3.5" SATA) 500GB, 1TB and 2TB Hard Drives. Dell. Vendor model numbers ST2000NM0011, ST1000NM0011 and ST500NM0011.
Ajánlott

Keresse meg a legjobb letöltést a rendszeréhez

Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.

Keresés a támogatási adatok között

Adja meg Dell-szervizcímkéjét vagy -modelljét

Szeretné kikeresni termékét? Adjon meg egy termékazonosítót. Mutasd meg, hogyan!

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.

Fixes & Enhancements

Resolved rare issue that could cause hang during boot up with RAID controller
Resolved issue would unexpectedly abort read command without proper reporting proper status
Improved drive error handling
További információ

Verziószám

PA08, A02

Kibocsátás dátuma

19 szept. 2012

Letöltés típusa

Firmware

Kategória

Adattárolás

Fontosság

Recommended
A Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Elérhető formátumok View Important Information

Fájlformátum: Frissítőcsomag MS Windows rendszerhez (32 bites)
Fájlnév: Serial-ATA_Firmware_NPK9P_WN32_PA08_A02.EXE
Fájlméret: 6 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
91c0b965f1080559f910d1f049f7f79a
SHA1:
1b582058e4d75ef4280f2576e708bbf9010ab070
SHA-256:
62e79022873511fe12a18b7373f49704f20971d1d710f65192b4e6dd830cf1c7

Fájlformátum: A GnuPG file which contains a cryptographic signature
Fájlnév: Serial-ATA_Firmware_NPK9P_LN32_PA08_A02.BIN.sign
Fájlméret: 194 Bytes
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
d1d12eb2614aab4e88897b9635bd60ec
SHA1:
c7401dfd16e52bec234ae745582f468f842def41
SHA-256:
555babb732a1d05b091736325668d2301858697746216a7b433eee511255ce95

Fájlformátum: Update Package for Red Hat Linux
Fájlnév: Serial-ATA_Firmware_NPK9P_LN32_PA08_A02.BIN
Fájlméret: 4.08 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
16a6cf20976fbfcfca61fc90e590d8a8
SHA1:
c1e03376491d8ba6fd0e0429c19f31a02e49eb35
SHA-256:
3f6b60645a7addf411848e7a3f8855e4b4dbf9bd2e12c0d571b11c0570000d16

A letöltéssel Ön elfogadja a Dell szoftverlicenc-szerződés feltételeit.

További részletek

Show All | Az összes elrejtése
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.

This update will run on drives remaining in a RAID set that is in a Offline state.
Novell SuSE Linux ES 11
Windows Server 2008 x64
Red Hat® Ent Linux 4.5
Red Hat® Ent Linux 4.6
SuSE Linux ES 9
Suse Linux ES 9
Suse Linux ES 10
Red Hat® Enterprise Linux 4.5
Red Hat® Ent Linux 4.7
Red Hat® Ent Linux 5.2
Red Hat® Enterprise Linux 6
Red Hat® Ent Linux 5
Novell SuSE Linux ES 10
Windows Server 2008 x86
Windows Server 2003
Windows Server 2008 R2
Windows Server 2003 x64
Seagate Constellation ES SATA 1TB 7.2K RPM
Seagate Constellation ES SATA 2TB 7.2K RPM
Seagate Constellation ES SATA 500GB 7.2K RPM
Download

1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok