Seagate SAS ST9146803SS and ST9300603SS firmware version FS62

AUTOMATIKUSAN TELEPÍTETT Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
This release contains firmware version FS62 for Seagate SAS (10K rpm 2.5" SAS) 146GB and 300GB Hard Drives. Vendor model numbers ST9146803SS and ST9300603SS.
Ajánlott

Keresse meg a legjobb letöltést a rendszeréhez

Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.

Keresés a támogatási adatok között

Adja meg Dell-szervizcímkéjét vagy -modelljét

Szeretné kikeresni termékét? Adjon meg egy termékazonosítót. Mutasd meg, hogyan!

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.

Fixes & Enhancements

Supports updating Seagate SAS (10K rpm 2.5" SAS) 146GB and 300GB Hard Drives to 6Gb SAS compliance.
További információ

Verziószám

FS62, A02

Kibocsátás dátuma

06 dec. 2011

Letöltés típusa

Firmware

Kategória

SAS-meghajtó

Fontosság

Recommended
A Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Elérhető formátumok View Important Information

Fájlformátum: Frissítőcsomag MS Windows rendszerhez (32 bites)
Fájlnév: FRMW_WIN_R245084.EXE
Fájlméret: 4.91 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
03B88B6C7C07E16631635BDBEB4D3EE0
SHA1:
Not available
SHA-256:
Not available

Fájlformátum: A GnuPG file which contains a cryptographic signature
Fájlnév: FRMW_LX_R245084.BIN.sign
Fájlméret: 194 Bytes
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
DA3785963E92C8BDF0C89B30F413E7B5
SHA1:
Not available
SHA-256:
Not available

Fájlformátum: Update Package for Red Hat Linux
Fájlnév: FRMW_LX_R245084.BIN
Fájlméret: 3.41 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
86B0B6534F65BB10C9DF1077ED6DEACD
SHA1:
Not available
SHA-256:
Not available

A letöltéssel Ön elfogadja a Dell szoftverlicenc-szerződés feltételeit.

További részletek

Show All | Az összes elrejtése
Important Information - External:
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.

This update will run on drives remaining in a RAID set that is in a Offline state.

There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
HD,146G,SAS6,10K,2.5,SGT,FRFLY
HD,300G,SAS6,10K,2.5,SGT,FRFLY
Download

1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok