HLDS GCC-4244N 24x slim combo, v.B104, A03
AUTOMATIKUSAN TELEPÍTETT Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.This is a DOS based firmware flash utility that will update the HL-DT-ST GCC4244 CD-RW/DVD (Dell Assembly numbers: PD438 ) to firmware revision B104.
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót. Mutasd meg, hogyan!
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
B104
-Fixes installation problem when installing with Dell PowerEdge Installation and Server Management discs using Windows Server SP1 ISO images burnt to CD-R.
Verziószám
Kibocsátás dátuma
Letöltés típusa
Kategória
Fontosság
OptionalA letöltéssel Ön elfogadja a Dell szoftverlicenc-szerződés feltételeit.
The executable will extract files needed to flash the drive in a DOS environment. These files need to be copied to a bootable DOS Floppy diskette or bootable DOS Memory Key. The executable does not create MS-DOS system files. This flash will update the drive's firmware to B104. You must remove the bootable Floppy diskette or bootable Memory Key and power cycle the system before using the drive.
If the firmware re-flash fails (e.g., system hangs, etc.), power cycle the system and try again.
Instructions for R143185.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Note: You will need to provide a bootable DOS Floppy diskette or a bootable DOS Memory Key.
This package does not contain DOS system files.
Warning! Do not power cycle system during Firmware Flash Process.
Firmware Flash Procedure
1. Copy the files extracted from the Zip package to a bootable DOS Floppy diskette or a bootable DOS Memory Key.
2. Boot to the bootable DOS Floppy diskette or bootable DOS Memory Key.
3. The autoexec.bat will run and the firmware flash will begin automatically.
4. When the firmware flash completes successfully remove the bootable DOS Floppy diskette or bootable DOS Memory Key.
5. Power cycle the System.