Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell OptiPlex System BIOS, A10
AUTOMATIKUSAN TELEPÍTETTEz a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Optiplex GXa A10 FlashBIOS
Ajánlott
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.
Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót.Mutasd meg, hogyan!
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet.A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
The following changes were made to the A09 BIOS to create A10:
1. Fixed issue with European USR Winmodem and memory allocation.
2. Updated the copyright to 2000.
3. Fixed a Teac CD power on issue.
4. Got rid of code that forces 1.44 mode when more than 15 sectors. MFG does not need this anymore. 5.25 is obsolete.
5. Added the service tag to TYPE 1 for SMBIOS calls.
6. Added WuOL support for NIC and USB.
7. Changed OEMx to DELL, Updated the Sleep State Packages from 2 bytes to 4,
8. Changed ACPI OEMID string to new cross LOB standard of all Caps "DELL"
9. Updated code to handle date defaulting to year 2000 in system setup.
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Fájlformátum:One or more self extracting disk images inside of a self extracting zip
Fájlnév:BGxa_a10.exe
Fájlméret:341.61 KB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
cb65e1e156b4d4eb179b3e37e02fe66d
SHA1:
Not available
SHA-256:
Not available
Fájlformátum:Flash BIOS executable
Fájlnév:Gxa_a10.exe
Fájlméret:194.52 KB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file format consists of a BIOS-executable file. To use it, download the file and copy it to a DOS-bootable USB flash drive, then boot the system to the USB flash drive and run the program.
Floppy Creating the disk: NOTE: This procedure requires one blank, formatted 3.5-inch floppy disk; label the disk BIOS.
1. When the File Download window appears, click “Save this program to disk”. 2. Choose “Desktop” as the location. 3. Click “Ok”. 4. After the file has finished copying files, click “Close”. 5. Press the “Windows” + “M” keys at the same time to minimize all the open windows. 6. Find the downloaded file on your Desktop, if it looks like a floppy disk, double-click it and skip to Step 7.
NOTE: If the Security Warning window appears, click “Yes”.
7. Click “Setup”. A DOS Window appears. 8. Press the “Enter” key. 9. Insert the floppy disk into the floppy disk drive and press the “Enter” key. 10. Press the “Y” key to begin copying files. An End of the disk set prompt appears. 11. Press the “Enter” key. 12. Click the “Start” button, click “Run”, and then type a: in the Open box. Click “OK’. The list of files on the floppy disk appears. 13. If there is a readme file in the list, double-click it for additional instructions. 14. Close all open windows and leave the disk in the floppy drive. Skip to the section Flashing the BIOS below
NOTE: If you are creating this disk on another computer, remove the disk. Then insert it into the system that needs the BIOS flashed, and resume the procedure.
Non-Packaged Creating the disk: NOTE: This procedure requires one blank bootable, formatted 3.5-inch floppy disk; label the disk BIOS.
1. When the File Download window appears, click “Save this program to disk”. 2. Choose “Desktop” as the location. 3. Click “Ok”. 4. After the file has finished copying files, click “Close”. 5. Press the “Windows” + “M” keys at the same time to minimize all the open windows. 6. Insert the blank bootable formatted 3.5-inch floppy disk. 7. Right-click the copy of the file, point to “Send To”, click “3 1/2 Floppy (a)”, and then skip to the section Flashing the BIOS below.
Flashing the BIOS: NOTICE: Changing the system BIOS may result in unintended side affects, such as incompatibility of the new BIOS with installed hardware. If problems arise after a BIOS change, it may be necessary to return the system to the original version of the BIOS. 1. If you are flashing the BIOS on a portable computer, be sure that the AC adapter is plugged in and the computer is not operating on battery power. 2. Ensure that the Flash BIOS disk is inserted into the floppy disk drive. 3. Click the “Start” button, click “Shut Down”, click “Restart”, and then click “Ok”. The computer should restart and boot to the floppy disk.
NOTE: If the flash BIOS program does not start, and you see only an A:\ prompt, refer to the instructions from the Dell File Library page for the BIOS update or to the Readme.txt instructions. Generally, you will type the name of the executable flash BIOS file such as BGX1_A10.exe for BIOS version A10 on the OptiPlex™ series system.
A Press any key to continue prompt appears. 4. Press the “Enter” key. A Press Y to replace old BIOS with new BIOS prompt appears. 5. Press the “Y” key.
NOTICE: Do not interrupt the system during this process. Please refrain from pressing any keys on the keyboard, moving the mouse, or interrupting power to the system. Failure to do so could result in damage to the system BIOS.
When the computer has finished updating the BIOS, a Flash program successful. Press any key to reboot prompt appears. 6. Remove the floppy disk and press the “Enter” key. 7. The computer will now restart with the new revision of the BIOS installed. The boot screen will indicate the BIOS version.
If you encounter device or resource errors after flashing the system BIOS, enter the System Setup, clear the NVRAM and restore t
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.