Need TPM Support?
For additional helpful information, please refer to our Knowledge Base. View article.Dell ControlVault, v.1.2.00208.033, A08
AUTOMATIKUSAN TELEPÍTETT Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
6.100.153 Production USH Firmware CID7
Ajánlott
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót. Mutasd meg, hogyan!
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet. A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
- Functionality fixes / workaround for various Smart Cards
- Fix for firmware lock when removing a Smart Card after being asked for a PIN
- Fix for DOS upgrade error for systems with Upek sensor
- Enumeration changes to disallow USB transactions until fully enumerated by the host
További információ- Fix for firmware lock when removing a Smart Card after being asked for a PIN
- Fix for DOS upgrade error for systems with Upek sensor
- Enumeration changes to disallow USB transactions until fully enumerated by the host
Verziószám
1.2.00208.033, A08
Kibocsátás dátuma
02 ápr. 2009
Letöltés típusa
Firmware
Kategória
Biztonság
Fontosság
RecommendedA Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Elérhető formátumok
Fájlformátum: ZipPack External
Fájlnév: Dell_ControlVault_A08_R214858.exe
Fájlméret: 5.25 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
A letöltéssel Ön elfogadja a Dell szoftverlicenc-szerződés feltételeit.
Támogatott operációs rendszerek
Windows 7 (32 bites)
Windows 7, 64-bit
Windows Vista (32 bites)
Windows Vista, 64-bit
Windows XP
Windows XP (64 bites)
Telepítési utasítások
Custom Instructions for Dell_ControlVault_A08_R214858.exe:
Run this firmware update from a MS-DOS bootable disk (USB Memory Key, etc), or from within Windows.
-----------------
UPDATE PROTECTION
-----------------
Please note: The BCM5880 firmware update process contains 2 protection mechanisms to prevent unauthorized updates.
Protection Mechanism 1: TPM Deactivation.
If the Trusted Platform Module (TPM) on the target computer has ever been activated in the past, in order to update the BCM5880 firmware, the TPM must be set to ON and DEACTIVE in the BIOS SETUP program before the firmware update will run. If the TPM on the target platform has never been activated previously, then this step is NOT necessary.
Protection Mechanism 2: Anti-Hammering.
The BCM5880 is equipped with Anti-Hammering protection that detects large numbers of read/write requests in a short period of time. This mechanism protects against malicious software that attempts to gain access to stored credentials by using multiple retry methods such as dictionary or brute force attacks. If a large number of read/write attempts are detected, the BCM5880 will temporarily shut down to prevent unauthorized access, and a reboot is required. In some instances, starting a firmware update may trigger the Anti-Hammering protection if the BCM5880 has just been recently used. In this case, the firmware update tool will prompt you to power off and then power the system back on, and then proceed with the firmware update.
--------
DOWNLOAD
--------
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save this program to disk (Windows XP users, click Save) and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file name icon appears on your desktop.
----------------
EXTRACT FIRMWARE
----------------
6. Double-click the new icon on the desktop that you just downloaded. The Self-Extractor window appears.
7. Click OK or Continue. The Self-Extracting Driver Installation window appears and prompts to extract files to C:\DELL\DRIVERS\Rxxxxxx.
8. Leave all of the default settings and click Unzip or OK. If the directory doesn''''t exist, you''''''''ll be prompted to create one. Click Yes. A Self Extractor window appears and indicates C:\DELL\DRIVERS\R209639 files were extracted.
9. Click OK and follow the on-screen installation instructions on the screen. A window will open displaying the new firmware folder (C:\DELL\DRIVERS\Rxxxxxx)
------------------------------------------
Installation/Update From MS-DOS.
------------------------------------------
The BCM5880 firmware must be updated from MS-DOS.
10. Create a bootable MS-DOS disk (floppy, USB Memory Key, etc)
11. Copy the files from the firmware directory in step 9 above (C:\DELL\DRIVERS\Rxxxxxx) into a folder on the MS-DOS boot disk. Make sure you keep the directory and folder structure intact during the copy operation.
12. Shut down your computer and boot to the bootable MS-DOS disk
13. Switch to the folder that was created in step 11.
14. Run UPDATE.BAT and follow any instructions you see on the screen.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------
Installation/Update From Windows XP.
------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\Rxxxxxx\firmware)
11. Double click on ushupgrade.exe for a 32-bit operating system, or ushupgrade64.exe for a 64-bit operating system.
12. Follow the on-screen prompts.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------
Installation/Update From Vista.
------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\Rxxxxxx\firmware)
11. R
Run this firmware update from a MS-DOS bootable disk (USB Memory Key, etc), or from within Windows.
-----------------
UPDATE PROTECTION
-----------------
Please note: The BCM5880 firmware update process contains 2 protection mechanisms to prevent unauthorized updates.
Protection Mechanism 1: TPM Deactivation.
If the Trusted Platform Module (TPM) on the target computer has ever been activated in the past, in order to update the BCM5880 firmware, the TPM must be set to ON and DEACTIVE in the BIOS SETUP program before the firmware update will run. If the TPM on the target platform has never been activated previously, then this step is NOT necessary.
Protection Mechanism 2: Anti-Hammering.
The BCM5880 is equipped with Anti-Hammering protection that detects large numbers of read/write requests in a short period of time. This mechanism protects against malicious software that attempts to gain access to stored credentials by using multiple retry methods such as dictionary or brute force attacks. If a large number of read/write attempts are detected, the BCM5880 will temporarily shut down to prevent unauthorized access, and a reboot is required. In some instances, starting a firmware update may trigger the Anti-Hammering protection if the BCM5880 has just been recently used. In this case, the firmware update tool will prompt you to power off and then power the system back on, and then proceed with the firmware update.
--------
DOWNLOAD
--------
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save this program to disk (Windows XP users, click Save) and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file name icon appears on your desktop.
----------------
EXTRACT FIRMWARE
----------------
6. Double-click the new icon on the desktop that you just downloaded. The Self-Extractor window appears.
7. Click OK or Continue. The Self-Extracting Driver Installation window appears and prompts to extract files to C:\DELL\DRIVERS\Rxxxxxx.
8. Leave all of the default settings and click Unzip or OK. If the directory doesn''''t exist, you''''''''ll be prompted to create one. Click Yes. A Self Extractor window appears and indicates C:\DELL\DRIVERS\R209639 files were extracted.
9. Click OK and follow the on-screen installation instructions on the screen. A window will open displaying the new firmware folder (C:\DELL\DRIVERS\Rxxxxxx)
------------------------------------------
Installation/Update From MS-DOS.
------------------------------------------
The BCM5880 firmware must be updated from MS-DOS.
10. Create a bootable MS-DOS disk (floppy, USB Memory Key, etc)
11. Copy the files from the firmware directory in step 9 above (C:\DELL\DRIVERS\Rxxxxxx) into a folder on the MS-DOS boot disk. Make sure you keep the directory and folder structure intact during the copy operation.
12. Shut down your computer and boot to the bootable MS-DOS disk
13. Switch to the folder that was created in step 11.
14. Run UPDATE.BAT and follow any instructions you see on the screen.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------
Installation/Update From Windows XP.
------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\Rxxxxxx\firmware)
11. Double click on ushupgrade.exe for a 32-bit operating system, or ushupgrade64.exe for a 64-bit operating system.
12. Follow the on-screen prompts.
FIRMWARE UPDATE IS NOW COMPLETE.
------------------------------------------
Installation/Update From Vista.
------------------------------------------
10. Navigate to the \firmware subdirectory (C:\DELL\DRIVERS\Rxxxxxx\firmware)
11. R
Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok
További letöltésekért lépjen a következő oldalra: Illesztőprogramok és letöltések. Az ezen az oldalon található információk használatával kapcsolatban látogasson el az illesztőprogramokkal kapcsolatos súgó és oktatóanyagok oldalára.