AUTOMATIKUSAN TELEPÍTETTEz a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Adaptec 39160 SCSI Controller BIOS
Ajánlott
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.
Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót.Mutasd meg, hogyan!
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet.A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
Fixed issue: Booting to utility partition hangs on PE4400, PE2450, and PE1400 when 39160 is connected to hard drives.
A Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Fájlformátum:Kibontja a fájlokat közvetlenül a helyi lemezre
Fájlnév:39160A02.exe
Fájlméret:280.72 KB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
NOTE: You will need a pre-formatted DOS boot floppy to extract to and run these files from. DOS 6.22 is recommended
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package. 2. Insert bootable floppy into floppy drive. 3. Specify the drive letter of your floppy drive as the location to unzip the files. 4. Click on the unzip button to extract files.
Install FW 1. Boot system from the DOS bootable floppy diskette with extracted files from step 4 above. 2. Type the following command under DOS command to flash the BIOS: Flash4.exe -w 39160.rom This command will flash BIOS (39160.rom) to all adapters in the system that have the same model. After successfully flashing BIOS, the utility returns status code 0. 3. Restart the system and verify that the adapter posts the correct BIOS banner during system booting up.
Additional Notes: If there are some other adapter models in the system besides the ones you want to flash, the flash utility will return status code 13: Unable to flash some of the host adapters after flashing. Ignore this error status since flashing to the required adapters has been successfully finished and the BIOS of those other adapter models are not changed.
For more information on the flash4 utility, please read interfac.doc that is included in this diskette.
Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok