Seagate ST9160418ASG 160GB/ST9250464ASG 250GB 2.5 7200 S2 HDD Firmware Update
AUTOMATIKUSAN TELEPÍTETT Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.This package provides the Seagate ST9160418ASG 160GB/ST9250464ASG 250GB 2.5 7200 S2 HDD Firmware Update and is supported on Latitude, Optiplex, Precision and Vostro models that are running the following Windows Operating Systems: XP, Vista and Windows 7.
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót. Mutasd meg, hogyan!
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
Fixes - Fixed clicking noise Enhancements - Not applicable
Verziószám
Kibocsátás dátuma
Letöltés típusa
Kategória
Fontosság
RecommendedA letöltéssel Ön elfogadja a Dell szoftverlicenc-szerződés feltételeit.
1. Please make sure A/C power is being used while updating your hard drive. 2. Please do not interupt the firmware update process.
Custom Instructions for R250673.EXE: PLEASE PRINT THE FOLLOWING INSTRUCTIONS/For Bootable CD option (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE) 1. Click on the (R250673.EXE) file and select "RUN" then "RUN" again. 2. Press "Continue" then "OK" to extract the files to the provided location. 3. If you have CD imaging software that supports the .ISO image format the file "C:\DELL\Drivers\R250673\Seagate Utility.ISO" is an image for a bootable CD that will automatically run the application. 4. Boot to the CD. 5. The Seagate utility will start automatically. 6. The utility will autoscan and update the appropiate Seagate ST9160418ASG & ST9250464ASG. 7. Once completed, a message detailing drive model, serial number and updated 4SDM1 or 5SDM1 firmware will appear. 8. Remove the CD and power off your PC. 9. Power on your PC to continue normal operation. For Other Bootable option (IE. USB key, etc.) (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATINGYOUR HARD DRIVE) - Click on the (R250673.EXE) file and select "RUN" then "RUN" again. - Press "Continue" then "OK" to extract the files to the provided location. - The files are located in "C:\DELL\Drivers\R250673\Files" directory. - Add the files to your bootable media and run the "FLASH.bat". - The Seagate utility will start automatically. - The utility will autoscan and update the appropiate Seagate ST9160418ASG & ST9250464ASG. - Once completed, a message detailing drive model, serial number and updated 4SDM1 or 5SDM1 firmware will appear. - Remove the Bootable Media and power off your system.