Western Digital WD2500AALX/WD3200AALX/WD5000AALX/WD10EALX 3.5 7200 RPM SATA3.0 Firmware Update

AUTOMATIKUSAN TELEPÍTETT Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
This package provides the Western Digital WD2500AALX 250GB/WD3200AALX 320GB/WD5000AALX 500GB/WD10EALX 1TB 3.5 7200 RPM SATA3.0 Firmware Update and is supported on Vostro Desktop, XPS Desktop, Inspiron Desktop, Precision, Alienware Desktop and Optiplex models that are running the following Operating Systems: XP, Vista, Windows 7, Linux and Ubuntu.
Ajánlott

Keresse meg a legjobb letöltést a rendszeréhez

Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.

Keresés a támogatási adatok között

Adja meg Dell-szervizcímkéjét vagy -modelljét

Szeretné kikeresni termékét? Adjon meg egy termékazonosítót. Mutasd meg, hogyan!

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.

Fixes & Enhancements

Initial Release.
További információ

Verziószám

19.01H19, A00

Kibocsátás dátuma

07 szept. 2011

Letöltés típusa

Hardware

Kategória

Adattárolás

Fontosság

Recommended
A Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Elérhető formátumok

Fájlformátum: ZipPack External
Fájlnév: R313263.exe
Fájlméret: 1.35 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

A letöltéssel Ön elfogadja a Dell szoftverlicenc-szerződés feltételeit.

További részletek

Show All | Az összes elrejtése
Red Hat® Linux 9.0
Ubuntu® Desktop 7.04
Windows 7 (32 bites)
Windows 7, 64-bit
Windows Vista (32 bites)
Windows Vista, 64-bit
Windows XP
Windows XP Embedded
Windows XP (64 bites)
Hard Drive Installation (via WinZip) of DOS Utility for R313263.exe Download 1.Click the location, e.g. Americas, from which you want to download the file. 2.When the File Download window appears, click Save this program to disk and click OK. The Save In window appears. 3.From the Save In drop-down menu, click to select Desktop and then click Save. The file will download to your desktop. 4.If a Download Complete window appears, click Close. A new icon appears on your desktop. Install 1. Double-click the new icon on the desktop labelled R313263.exe. 2. The Self-Extractor window appears and prompts you to extract or unzip to C:\DELL\DRIVERS\R313263.If you did not print these instructions, write down this path. The WinZip Self-Extractor window appears. 3. Click OK. 4. If the Self-Extractor window is still open, close it. 5. Create a DOS boot disk. For more information, refer to Dell Knowledge Base Article TT1014475 – "What can I use for a boot disk with CD-ROM support?"6. Insert the floppy disk into the floppy drive and reboot the computer. 7. At the A:/> prompt, type C: and then press the [ENTER] key. 8. Type C:\DELL\DRIVERS\R313263 and then press [ENTER]. 9. Follow the on-screen instructions. Installation 1. Extract .zip file to a known path. 2. Copy "WD.bat" and "WD4082.exe" to root directory of a bootable USB key. 3. Boot from USB key and ensure drive path includes WD.bat and WD4082.exe. 4. Type "WD" and hit "Enter". 5. Firmware update will provide messaging indicating successful update. Note: Update checks current firmware version and will not run on identical version.

Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok