Dell ESM Firmware, A57

AUTOMATIKUSAN TELEPÍTETT Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
The Embedded Server Management (ESM) flash utility is a tool to update
firmware(FW) to the Embedded Server Management and all devices connec-
ted to it on the system management bus (SMB). The devices currently
implemented in the utility are:
* Embedded Server Management
* System backplane
* System power supply paralleling board (PSPB)
* Hotplug
This firmware update is a non-destructive update. User data is not
affected.
Ajánlott

Keresse meg a legjobb letöltést a rendszeréhez

Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.

Keresés a támogatási adatok között

Adja meg Dell-szervizcímkéjét vagy -modelljét

Szeretné kikeresni termékét? Adjon meg egy termékazonosítót. Mutasd meg, hogyan!

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.

Fixes & Enhancements

- Prevents PCI Bus lockups.
További információ

Verziószám

A57, A57

Kibocsátás dátuma

14 jún. 2006

Letöltés típusa

Firmware

Kategória

Beágyazott szerverfelügyelet

Fontosság

Optional
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Elérhető formátumok

Fájlformátum: Frissítőcsomag MS Windows rendszerhez (32 bites)
Fájlnév: ESM-WIN-A57.exe
Fájlméret: 1.94 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
7862115D07C5FBF453F2B7667B75E1F0
SHA1:
Not available
SHA-256:
Not available

Fájlformátum: Kibontja a fájlokat közvetlenül a helyi lemezre
Fájlnév: PE6400-ESMA57.exe
Fájlméret: 405.47 KB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

A letöltéssel Ön elfogadja a Dell szoftverlicenc-szerződés feltételeit.

További részletek

Show All | Az összes elrejtése
Default Instructions for PE6400-ESMA57.exe:


1. Download the .exe file to a directory on your hard drive. The file
downloaded is a self-extracting executable.
2. Execute the downloaded file and follow the on-screen instructions.
The files may be un-zipped to floppy disk or hard drive(if the hard drive
is in the system to be updated).
3. After the files have been un-zipped, you may delete the self-extracting
file downloaded in step 1.

MS-DOS Version
1. Boot the system requiring the update to DOS.
2. Insert the diskette created above or change to the directory on the
hard drive
where the files were un-zipped.
3. At the DOS prompt, type "SMFLSH". This will run SMFLSH.EXE
4. Answer “Y” at the prompt to begin the upgrade.

Windows NT/2000 Version
Note: You must have the Dell Management software or OpenManage Server
Administrator installed to proceed.
There are two methods of upgrade in Windows NT/2000.
1. In a DOS window, change to the directory the files were un-zipped to
and type “SMFLSHNT”. Answer “Y” at the prompt to begin the upgrade.
2. Using Windows Explorer, browse to the location containing the files
un-zipped above(diskette or hard drive). Run(double-click) SMFLSHNT.EXE
and answer “Y” at the prompt to begin the upgrade.

OpenManage Format

1. Download the .zip file.
2. Start Server Administrator.
3. Click System.
4. Click Main System Chassis.
5. Click Firmware.
6. Click the Update tab.
7. Click Browse and navigate to where the zip file was downloaded
8. Select the zip file, click Validate Update File
9. After the file is validated, click Begin Update and
follow the remaining prompts to perform the update.

Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok