Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell PowerVault BIOS, A08
AUTOMATIKUSAN TELEPÍTETTEz a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
PowerVault 725N BIOS A08
Ajánlott
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.
Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót.Mutasd meg, hogyan!
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet.A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
1. Fixes issue in which a PV725N with BIOS A07 and Adaptec SCSI card 39160 BIOS version 2.57.2s2 will report that no hard drives are available.
A Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Fájlformátum:Kibontja a fájlokat közvetlenül a helyi lemezre
Fájlnév:PV725N_A08.exe
Fájlméret:681 KB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
Note: In order to execute this file, it must be downloaded to a system running Microsoft Windows with an unzip utility installed.
Download 1. Click the "Download Now" link to download the file. 2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement. 3. When the File Download window appears, click "Save" to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to unzip the files.
Note: The default extract path is c:\Dell\PV725N
4. Click on the OK button to extract files. 5. After a few seconds a dialog box will appear that says that all files were successfully unzipped. Click OK to exit from the installer.
Installation 1. Copy the BIOS file A08.rom to the PowerVault 725N system. 2. Open a Windows Explorer window on the PowerVault 725N by using a direct attached Keyboard, monitor, and mouse or by using the Terminal Service Advanced Client located in the PowerVault NAS Manager web interface. 3. Browse to "C:\Dell\Flash Utility". 4. Double click WinSFI to open the AMI WinFlash Utility. 5. In the AMI WinFlash window, ensure only the NVRAM Programming box is checked. 9. In the File drop-down menu, select Load BIOS and Flash. 10. When the Open window appears, use the folder's navigation icons to navigate to the folder you placed the downloaded BIOS file in. 11. Click Open. 12. When a message appears asking if you are sure you want to update the BIOS, click Yes. 13. After the BIOS update is complete, a message will appear stating the flash ROM update is complete and asks if you want to restart your system. Click Yes.
Note: Your system will reboot after clicking Yes.
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.