Broadcom Trusted Platform Module Driver
Újraindítás szükséges AUTOMATIKUSAN TELEPÍTETT Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
This package provides the Broadcom Trusted Platform Module Driver and is supported on Precision M70/M20 and Latitude D410/D610/D810/X1 that are running the following Windows Operating Systems: Windows 2000 and XP.
Ajánlott
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót. Mutasd meg, hogyan!
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet. A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
Fixes
- Not Applicable.
Enhancements
- Enhanced support for the following languages: Traditional Chinese Korean Brazilian Portuguese.
További információ- Not Applicable.
Enhancements
- Enhanced support for the following languages: Traditional Chinese Korean Brazilian Portuguese.
Verziószám
1.71.0020.0, A03
Kibocsátás dátuma
10 febr. 2014
Letöltés típusa
Driver
Kategória
Chipkészlet
Fontosság
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Elérhető formátumok
Fájlformátum: ZipPack External
Fájlnév: R99394.EXE
Fájlméret: 26.6 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
A letöltéssel Ön elfogadja a Dell szoftverlicenc-szerződés feltételeit.
Támogatott operációs rendszerek
Windows 2000
Windows XP
Telepítési utasítások
Hard Drive Installation (via WinZip) with Setup.exe File for R99394.EXE
Download
1. Click Download File, to download the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
3. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears.
4. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install
1. Navigate to your desktop and double-click on the icon labeled R99394.EXE
2. Click Continue. The Destination Folder Window appears.
3. Click the OK button.
4. If prompted to create the folder, click the Yes button. A progress meter moves as extraction is completed.
5. Click the OK button.
Turn on the TPM
NOTE: If this is the first time the TPM has ever been used on this computer, you must perform steps 5 through 9 below. If the TPM on this system has been used before, you may now skip directly to step 10. Steps 5 through 9 must be executed once, and only once, on any given system.
1. Reboot the computer and enter the system SETUP program by pressing F2 during the Power On Self Test.
2. In the Setup program, open the "Security" settings category and select the "TPM Security" menu option.
3. Set the TPM Security state to "On".
4. Exit from the Setup program by pressing the [Esc] key, when prompted make sure to choose the "Save/Exit" option in order to keep the changes.
5. Boot into the Windows operating system
6. Launch the Broadcom Secure Foundation (TM) Platform Initialization wizard by double-clicking on its icon in the system tray on the lower right hand corner of the screen.
7. The Platform Initialization Wizard will execute a function called "Vendor Activation." This operation only occurs once on any given system.
8. Follow the instructions in the dialog boxto execute the Vendor Activation step.
9. The system will now reboot automatically.
10. Reboot the computer and enter the system SETUP program again by pressing F2 during the Power On Self Test.
11. In the Setup program, open the "Security" settings category and select the "TPM Activation" menu option.
12. Set the TPM Activation state to "Activate".
13. Changes to this field take effect immediately.
14. At this point, the TPM is now ready to be put into service. When the operating system reboots, launch the Broadcom Secure Foundation (TM) Platform Initialization by double-clicking on its icon in the system tray on the lower right hand corner of the screen. This wizard will walk you through the procedure of establishing the TPM Owner and User passwords and credentials. For more information, please consult the "Broadcom Secure Foundation (TM) Getting Started Guide" located in the menu.
Reboot will be required
Download
1. Click Download File, to download the file.
2. If the Export Compliance Disclaimer window appears, click Yes, I Accept this Agreement.
3. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears.
4. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install
1. Navigate to your desktop and double-click on the icon labeled R99394.EXE
2. Click Continue. The Destination Folder Window appears.
3. Click the OK button.
4. If prompted to create the folder, click the Yes button. A progress meter moves as extraction is completed.
5. Click the OK button.
Turn on the TPM
NOTE: If this is the first time the TPM has ever been used on this computer, you must perform steps 5 through 9 below. If the TPM on this system has been used before, you may now skip directly to step 10. Steps 5 through 9 must be executed once, and only once, on any given system.
1. Reboot the computer and enter the system SETUP program by pressing F2 during the Power On Self Test.
2. In the Setup program, open the "Security" settings category and select the "TPM Security" menu option.
3. Set the TPM Security state to "On".
4. Exit from the Setup program by pressing the [Esc] key, when prompted make sure to choose the "Save/Exit" option in order to keep the changes.
5. Boot into the Windows operating system
6. Launch the Broadcom Secure Foundation (TM) Platform Initialization wizard by double-clicking on its icon in the system tray on the lower right hand corner of the screen.
7. The Platform Initialization Wizard will execute a function called "Vendor Activation." This operation only occurs once on any given system.
8. Follow the instructions in the dialog boxto execute the Vendor Activation step.
9. The system will now reboot automatically.
10. Reboot the computer and enter the system SETUP program again by pressing F2 during the Power On Self Test.
11. In the Setup program, open the "Security" settings category and select the "TPM Activation" menu option.
12. Set the TPM Activation state to "Activate".
13. Changes to this field take effect immediately.
14. At this point, the TPM is now ready to be put into service. When the operating system reboots, launch the Broadcom Secure Foundation (TM) Platform Initialization by double-clicking on its icon in the system tray on the lower right hand corner of the screen. This wizard will walk you through the procedure of establishing the TPM Owner and User passwords and credentials. For more information, please consult the "Broadcom Secure Foundation (TM) Getting Started Guide" located in the menu.
Reboot will be required
Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok
További letöltésekért lépjen a következő oldalra: Illesztőprogramok és letöltések. Az ezen az oldalon található információk használatával kapcsolatban látogasson el az illesztőprogramokkal kapcsolatos súgó és oktatóanyagok oldalára.