Dell PERC S300 Adapter, PERC S300 Integrated Modular, v.2.0.0-0166+00193000 FW , A06
Újraindítás szükségesAUTOMATIKUSAN TELEPÍTETTEz a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Dell PERC S300 Integrated Modular/ Adapter (Firmware)
Ajánlott
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.
Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót.Mutasd meg, hogyan!
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet.A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
- Fix for the System Inventory Collection (RSOD)Red Screen of Death with a S300 controller
- Background Array Scan
- Boot to RD1000 Tape
- Consistency Check startup on existing virtual disks after a new virtual disk is created
- Default VD cache policy is changed to "No caching"
- Support for CougarPoint chipset for S100
- New System support for S300: Coaster, Diamas and Skipper, Slinky
A Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
12fa4c9c41fda045590b0f106f846795
SHA1:
54b019b223f864cc9e04125132878644947f0bc1
SHA-256:
Not available
Fájlformátum:ZipPack External
Fájlnév:DELL_MULTI-DEVICE_A06_R300048.exe
Fájlméret:560.07 KB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.
1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP). 2. Reboot for the new FW take effect 3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares. 4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost) 5. Re-assign (greater than) 2TB SED Hot Spares.
Zip pack:
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to unzip the files. 4. Click onthe OK button to extract files. After the files are extracted the message all files were successfully unzipped will appear. 5. Click the OK button to exit from the installer.
Installation 1. Copy extracted files to bootable media. 2. Reboot system to bootable media. 3. Execute update.bat to perform flash. 5. After flash is complete, remove bootable media. 4. Reboot system for changes to take effect.
Windows Update Package:
Download 1. Click the "Download Now" link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.
Linux Update Package:
Download 1. Click the Download Now linkto download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Read over the release information presented by executing the ./FRMW_LX_RXXXXXX.BIN --version command from the shell. 2. Download and install any prerequisites identified in the above step before proceeding. 3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell. 4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Import the Dell public key. (You only need to do this once on your system.) 2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN.
Reboot will be required
Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok