Seagate Barracuda ST31000524AS Firmware Update

Újraindítás szükséges AUTOMATIKUSAN TELEPÍTETT Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
This package provides the Windows/DOS based Seagate Barracuda ST31000524AS Firmware Update and is supported on OptiPlex, Alienware Desktop, Inspiron Desktop, Precision and Vostro Desktop models that are running the following Operating Systems: XP, Vista, Windows 7 and DOS.
Ajánlott

Keresse meg a legjobb letöltést a rendszeréhez

Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.

Keresés a támogatási adatok között

Adja meg Dell-szervizcímkéjét vagy -modelljét

Szeretné kikeresni termékét? Adjon meg egy termékazonosítót. Mutasd meg, hogyan!

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.

Fixes & Enhancements

Fixes
- Not Applicable.

Enhancements
- Enhanced the acoustic performance.
További információ

Verziószám

JC4A, A03

Kibocsátás dátuma

11 jan. 2012

Letöltés típusa

Firmware

Kategória

Adattárolás

Fontosság

Recommended
A Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Elérhető formátumok View Important Information

Fájlformátum: A felhasználói útmutatót HTML-formátumban tartalmazó ZIP-fájl vagy CAB-fájl
Fájlnév: B765JC4A.zip
Fájlméret: 7.23 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
d3b5aa39adda9ee2b49e7ec6ab472312
SHA1:
3c591b523407b913bd576e20ba94d3a9842f732d
SHA-256:
Not available

A letöltéssel Ön elfogadja a Dell szoftverlicenc-szerződés feltételeit.

További részletek

Show All | Az összes elrejtése
1. Please close other applications before updating.
2. While the firmware is updating, please don't turn off the computer.
Windows 7 (32 bites)
Windows 7, 64-bit
Windows Vista (32 bites)
Windows Vista, 64-bit
Windows XP
Windows XP (64 bites)
Seagate ST31000524AS
Windows based firmware update for ST31000524AS:-
1. Download and unzip B765JC4A.zip into your desktop.
2. In B765JC4A folder, please search for the Windows folder.
3. Double click B7000100.EXE and it will begin to run. On the first screen you will select your language, and then select OK. The next screen is a warning screen, please read and select Next if you agree. The next screen is the License Agreement screen. If you agree, click "I agree" and then click Next.
4. You will then come to the screen that asks you to close and save all applications and to back up your data. When you are ready to start the firmware update, please check the "Begin firmware update procedure", and then click Proceed.
5. The system will reboot and load the firmware. Once the firmware update is complete the system will boot up into Windows normally.

DOS based firmware update for ST31000524AS:-
1. Unzip B765JC4A.zip into your bootable USB key. Boot up the computer with USB key.
2. In Dos folder, just type JC4A.BAT at the DOS prompt and press the enter key.
3. Your system will now start updating the HDD firmware. Once the firmware update is completed, your system will display a "DRIVE PASSED" message.
4. Remove your USB key, and turn off your system using the computers power button. Once the computer has been powered down, you can now turn the computer on normally.

Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok