AUTOMATIKUSAN TELEPÍTETTEz a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Driver support for the Integrated Ultra 320 SCSI Controller.
Ajánlott
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.
Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót.Mutasd meg, hogyan!
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet.A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
Driver support for the Integrated Ultra 320 SCSI Controller.
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Fájlformátum:One or more self extracting disk images inside of a self extracting zip
Fájlnév:R51294.exe
Fájlméret:988 KB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Installing the LSI Logic Driver during a fresh Windows XP Installation -------------------------------------------------------------------------
1. Ensure your Windows XP CD is inserted into the CD-ROM drive.
2. Start your system. Immediately press and release the F6 key when you see the following message:
"Setup is inspecting your computer's hardware configuration..." If you do not see this message, your system may not be setup to boot from CD-ROM. This change can be made within System Setup by rebooting and pressing F2.
3. When prompted, press S to specify an additional device.
4. Press Enter to select Others; insert the LSI Logic Ultra320 SCSI Driver for Windows XP diskette in your floppy drive.
5. Use the arrow keys to highlight "LSI Logic Ultra320 SCSI Adapter", then press Enter.
6. To add other host adapters that are not part of the Ultra320 Family, press S and repeat from Step 4 for each additional adapter and insert the appropriate driver disk.
7. Press Enter to continue with the Windows XP operating system setup. Follow the instructions onscreen and in the Windows XP documentation to complete the installation.
Updating the LSI Logic Driver from within Windows XP -------------------------------------------------------------------------
1. From Device Manager right click on the "LSI Logic Ultra320 SCSI Adapter" and then choose 'Properties'.
2. Click on the 'Driver' tab, click 'Update Driver' and then click on the 'Next' button.
3. From the next screen click on 'Display a list of the known drivers for this device...' and then the 'Next' button.
4. Click the 'Have Disk' button and type "a:\" in the 'Copy Manufacturer's files from:' drop down menu and choose 'OK'.
5. Choose the "LSI Logic Ultra320 SCSI Adapter" from the list and choose 'Next'. From the next screen choose 'Next' again.
6. Choose 'Finish' to complete the installation and restart system.
Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok