Riavvio richiestoINSTALLATO AUTOMATICAMENTEQuesto file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
Chassis Management Controller Firmware Version 2.20
Consigliato
Trova il download migliore disponibile per il sistema
Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema
Cerca supporto
Inserisci il modello o il codice di matricola Dell
Nessun risultato trovato. La ricerca non ha prodotto risultati. Modifica la ricerca e riprova.
Questo driver non è compatibile
Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.
Accedi a Windows come amministratore per utilizzare la scansione automatica. Se hai già effettuato l'accesso come amministratore e appare questo messaggio, riavvia il sistema.Il sistema è gestito dall'amministratore IT ed è possibile che le funzionalità siano limitate.
Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.
Correzioni e miglioramenti
Fixes and Enhancements in Version 2.20 ---------------------------------------- - QLogic FCoE mezzanine card: The QLogic supports 4 MAC and 2 WWN addresses, consisting of a total of 6 addresses to be displayed in the GUI pages and by the RACADM getmacaddress -a and getflexaddr commands. - New SD card format: The new SD card format contains two features to allow additional MAC addresses to be allocated for each server. The RACADM feature and featurecard commands display the features contained in the card. CMC 2.20 supports both the current SD card format and the new SD card format. - Launching vKVM from CMC: This feature allows direct launch of a KVM session on the server. - This feature is only supported when all of the following conditions are TRUE: 1) Server is PowerEdge M610 or PowerEdge M710. 2) The chassis power is on. 3) The LAN interface on the server's iDRAC is enabled. 4) The iDRAC version is version 2.20 or later. 5) The host system needs to have JRE (Java Runtime Environment) 6 Update 16 or later installed. 6) The host system needs to allow pop-up windows (i.e., disable pop-up blocking).
Dell Technologies consiglia di eseguire questo aggiornamento nel prossimo ciclo di aggiornamenti pianificato. L'aggiornamento contiene modifiche per preservare l’integrità generale del sistema. Inoltre, garantisce che il software di sistema resti aggiornato e compatibile con altri moduli di sistema (firmware, BIOS, driver e software) e includa nuove funzioni.
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package. 2. Specify the location to unzip the files. 3. Click on the unzip button to extract files. 4. Use the CMC user interface or CLI (RACADM) tool to perform the CMC firmware update.
Custom Instructions for CMC220_README.TXT:
1) Click Download now. The File Download window appears.
2) Click the Save button. The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button. A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file. The Dell CMC Release Notes window appears.