INSTALLATO AUTOMATICAMENTEQuesto file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
This utility updates the SCSI Seagate Cheetah 15K Drives firmware to DX10. This version addresses compatibility issues when drives are installed in U320 capable PV220/PV221S enclosures and other general quality improvements. The following Seagate drives are supported by this release: Seagate Model # ST318453LW Seagate Model # ST318453LC Seagate Model # ST336753LW Seagate Model # ST336753LC Seagate Model # ST373453LW Seagate Model # ST373453LC
Consigliato
Trova il download migliore disponibile per il sistema
Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema
Cerca supporto
Inserisci il modello o il codice di matricola Dell
Nessun risultato trovato. La ricerca non ha prodotto risultati. Modifica la ricerca e riprova.
Questo driver non è compatibile
Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.
Accedi a Windows come amministratore per utilizzare la scansione automatica. Se hai già effettuato l'accesso come amministratore e appare questo messaggio, riavvia il sistema.Il sistema è gestito dall'amministratore IT ed è possibile che le funzionalità siano limitate.
Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.
Correzioni e miglioramenti
This version corrects issues found with drives going intermittently Off-line, or a hang condition with drives installed in U320 capable PV220/PV221S systems.
Dell Technologies consiglia vivamente di eseguire questo importante aggiornamento il più presto possibile. L'aggiornamento contiene modifiche e correzioni di bug fondamentali per migliorare la funzionalità, l'affidabilità e la stabilità del sistema Dell. Inoltre è possibile che includa correzioni di sicurezza e altri miglioramenti di funzioni.
Formato file:Una o più immagini disco a estrazione automatica all'interno di uno zip a estrazione automatica
Nome file:BR71411.exe
Dimensioni file:873.64 KB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
Questo file contiene un set compresso di file. Scaricare il file in una cartella sul disco rigido, quindi fare doppio clic su di esso per decomprimere il set di file. Seguire le istruzioni per completare l'installazione.
Utility must be placed on a non-write protected diskette.
NOTE: In order to create this diskette, the file must be downloaded to and executed on a system running Microsoft Windows.
Download 1. Click the "Download Now" link to download the file. 2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement. 3. When the File Download window appears, click "Save" to save the file to your hard drive.
Diskette Creation 1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set. 2. Insert a blank diskette then click Continue. 3. After all the files have been copied to the last, click Finish.
Installation: NOTE: BACKUP ALL DATA BEFORE RUNNING THIS PROGRAM. Do not remove power from the devices or disturb the devices in any way while the download is in progress. Dell, Inc is not Responsible for any data loss resulting from the use of this program
NOTE: Before proceeding with the update, refer to README.TXT file, section 3.0 "Using The Update Utility" for important information regarding the update process.
Upon booting up from Update diskette, the user is displayed a menu and prompted to select the type of SCSI or RAID controller whose SCSI HDD is connected to.
If PERC3/xx, PERC4/xx is selected, the user is prompted to select the channel number the drives are connected to:
1)Update Drives connected to Channel 0 of PERC3 ? 2)Update Drives connected to Channel 1 of PERC3 ? 3)Update Drives connected to Channel 2 of PERC3 ? 4)Update Drives connected to Channel 3 of PERC3 ?
Once the controller selection has been made, utility will prompt the user to continue the update. Follow the prompts to completely update all SCSI Seagate 15K U320 devices found.
Once the update is complete Remove the diskette and reboot the system.