Delta 495W PSU (PN: N24MJ) Firmware Package

Riavvio richiesto INSTALLATO AUTOMATICAMENTE Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
This package provides the new firmware for power supplier and is supported on Delta 495W PSU (PN: N24MJ) running on the Windows and Linux operating systems.
Consigliato

Trova il download migliore disponibile per il sistema

Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema

Cerca supporto

Inserisci il modello o il codice di matricola Dell

Desideri cercare il tuo prodotto? Inserisci l'ID del prodotto. Mostrami come procedere

Questo driver non è compatibile

Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.

Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.

Correzioni e miglioramenti

Initial Version
Più dettagli

Versione

07.25.7D, A00-01

Data di rilascio

06 mar 2012

Tipo di download

Firmware

Categoria

Alimentazione

Importanza

Opzionale
Dell Technologies consiglia di rivedere questo aggiornamento per stabilire se è applicabile al sistema. L'aggiornamento contiene modifiche che interessano solo alcune configurazioni oppure offre nuove funzioni applicabili o meno all’ambiente in questione.
Formati disponibili Visualizza le informazioni importanti

Formato file: Pacchetto di aggiornamento per Microsoft Windows a 32 bit
Nome file: Power_Firmware_3DY53_WN32_07.25.7D_A00-01.EXE
Dimensioni file: 4.36 MB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
I pacchetti di aggiornamenti Dell (DUP) in formato Microsoft Windows a 32 bit sono stati progettati per essere eseguiti su sistemi operativi Microsoft Windows a 64 bit. I pacchetti di aggiornamenti Dell (DUP) in formato Microsoft Windows a 64 bit verranno eseguiti solo su sistemi operativi Microsoft Windows a 64 bit. Quando si seleziona un aggiornamento dei driver di un dispositivo, assicurarsi di selezionare quello appropriato per il sistema operativo in uso.
Per assicurare l'integrità del download, verificare il valore del checksum.
MD5:
32c85565f25d579d18be14d3f0f9916c
SHA1:
252e35cb42cb5856d3a24f73280a6d2ec0eaa56a
SHA-256:
43cf65fb94f22997bf8b2bdff50fd96bb12a4484cc620a6b1a3605931714287f

Formato file: Un file GnuPG contenente una firma crittografica
Nome file: Power_Firmware_3DY53_LN32_07.25.7D_A00-01.BIN.sign
Dimensioni file: 194 Bytes
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
La firma GnuPG per il pacchetto di aggiornamento per Red Hat Linux può essere utilizzata per autenticare l'identità di Dell nel relativo pacchetto di aggiornamento per Red Hat Linux.
Per assicurare l'integrità del download, verificare il valore del checksum.
MD5:
21229c079f5506f50011ba51d954d623
SHA1:
7baca3c6d748b075f1862e1ee7ce9e399ab15416
SHA-256:
58db6e9b69ba2647cf5ce3f6a93a518c29800d8669016a04967052bfa8bef52d

Formato file: Pacchetto di aggiornamento per Red Hat Linux
Nome file: Power_Firmware_3DY53_LN32_07.25.7D_A00-01.BIN
Dimensioni file: 2.16 MB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
I pacchetti Dell Update Packages per Linux possono essere utilizzati come applicazioni standalone che assicurano che vengano soddisfatti criteri di convalida specifici prima di eseguire un aggiornamento.
Nota: i pacchetti di aggiornamento per Linux sono open source. Informazioni dettagliate sono contenute nel file leggimi dei pacchetti Dell Update Packages per Linux.
Per assicurare l'integrità del download, verificare il valore del checksum.
MD5:
45324ae6ae6b746cdddb10d45e94eb71
SHA1:
15b52ebd0c35a08346060a246343fccd0fa8d4c5
SHA-256:
09c5f57ca704e5aeef7cda86fb6137a1ac342e129003120e8da69f589b4c7abe

Con il download l'utente accetta i termini del Contratto di licenza del software Dell. (in Inglese)

Ulteriori dettagli

Mostra tutto | Nascondi tutto
IMPORTANT: After a successful power supply firmware download, the managed system turns off for a duration ranging from three to ten minutes to continue updating the firmware. Once the firmware update is complete, the managed system reboots automatically.

CAUTION! Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit into an irrecoverable state and the managed system does not boot.
ASSY,PWR SPLY,495W,RDNT,DELTA
Delta 495W PSU (PN: N24MJ)
PSU FIRMWARE UPDATE INSTRUCTIONS:

CAUTION: Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit (PSU) into an irrecoverable state and the managed system does not boot.

IMPORTANT:
After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs may take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.


Instructions for ".BIN" File:

Download
1. Click the Download Now link to download the file.
2. When the "File Download" window appears, click Save to save the file to your hard drive.

Installation
1. Read the release information presented by executing the ".BIN" file with "--version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Run the update by executing ".BIN " file from the shell.
4. Follow the remaining prompts to perform the update.
5. Upon successful completion the DUP will prompt to reboot system.
6. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
8. Once the flashing process is complete the system should power back up and boot to OS.

Instructions for ".EXE" File:

Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
6. Upon successful completion the DUP will prompt to reboot system.
7. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
9. Once the flashing process is complete the system should power back up and boot to OS.


GnuPG Signature of Dell Update Package Instructions for ".sign" File:

Download
1. Click the "Download Now" link to download the file.
2. When the "File Download" window appears, click "Save" to save the file to your hard drive.

Installation
1. Import the Dell public key. (You only need to import once on your system.)
2. Verify the Dell Update Package by using its signature file.
3. Upon successful completion the DUP will prompt to reboot system.
4. Restart your system.
After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware.
5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply.
6. Once the flashing process is complete the system should power back up and boot to OS.

Tutorial e guida ai driver