Dell PowerVault MD 32/36 Series Storage Controller Firmware and NVSRAM firmware version 07.84.44.60
Riavvio richiestoINSTALLATO AUTOMATICAMENTEQuesto file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
Dell PowerVault MD 32/36 Series Storage Array
Consigliato
Trova il download migliore disponibile per il sistema
Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema
Cerca supporto
Inserisci il modello o il codice di matricola Dell
Nessun risultato trovato. La ricerca non ha prodotto risultati. Modifica la ricerca e riprova.
Questo driver non è compatibile
Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.
Accedi a Windows come amministratore per utilizzare la scansione automatica. Se hai già effettuato l'accesso come amministratore e appare questo messaggio, riavvia il sistema.Il sistema è gestito dall'amministratore IT ed è possibile che le funzionalità siano limitate.
Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.
Dell Technologies consiglia vivamente di eseguire questo importante aggiornamento il più presto possibile. L'aggiornamento contiene modifiche e correzioni di bug fondamentali per migliorare la funzionalità, l'affidabilità e la stabilità del sistema Dell. Inoltre è possibile che includa correzioni di sicurezza e altri miglioramenti di funzioni.
This update is recommended for all PowerVault MD 32/36 storage arrays.
This release contains the following features:
- Consolidated support for both 60-disk 4U (dense) and 12/24-disk 2U MD Series storage arrays. - Resolves a potential I/O path error between Fibre Channel chip and RAID Controller memory - Resolves a potential I/O Path error when using VMware vSphere 5.X when VAAI hardware accelerated VMFS data movement is enabled for VM migration, VMware snapshots, and VM cloning. - Resolves Incorrect Drawer number when assigning Hot spare
- New features for 60-disk 4U (dense) MD Series storage arrays are: - Enhanced snapshot functionality based on point-in-time (PiT) images - Asynchronous remote replication (iSCSI and FC-based) - Thin provisioned virtual disks - SSD cache configuration and SSD performance modeling - Windows Server 2012 (Standard and Datacenter) - Windows 8
- New features for 12/24-based 2U MD Series storage arrays are: - Adaptive disk pooling - Redesigned MD Storage Manager interface - Automatic support daya collection across multiple arrays - VMware vStorage APIs for Array Integration (VAAI) - Enhanced snapshot functionality based on point-in-time (PiT) images - Asynchronous remote replication (iSCSI and FC-based) - Thin provisioned virtual disks - SSD cache configuration and SSD performance modeling - Windows Server 2012 (Standard and Datacenter) - Windows 8
If your PowerVault MD3200/MD3220-series storage array is currently running a firmware version lower than 07.75.28.60, you cannot directly install the RAID controller firmware version 07.84.44.60 included in this release.
Instead, you must first install the bridge firmware version 07.75.28.60. After the bridge firmware is successfully installed, you can then install RAID controller firmware 07.84.44.60.
Specifically, follow these steps:
1. *** IMPORTANT *** Install Dell PowerVault MD Storage Manager (MDSM) software from the Resource DVD version 4.1.0.88 or higher.
2. Extract the following files from the MD3200_MD3220_Firmware_and_NVSRAM_Files.zip archive: * Bridge_Firmware_07_75_28_60.dlp * MD3200_MD3220_Firmware_07_84_44_60.dlp * MD3200_MD3220_NVSRAM_N26X0-784890-004.dlp
3. Download and activate RAID controller bridge firmware version 07.75.28.60 (contained in the Bridge_Firmware_07_75_28_60.dlp file)
4. Once the bridge firmware installation is successfully completed, wait at least 30 minutes to allow the attached hosts to re-discover the storage array.
5. Download and activate the RAID controller firmware version 07.84.44.60 (contained in the MD3200_MD3220_Firmware_07_84_44_60.dlp file) together with the NVSRAM configuration file version N26X0-784890-004 (contained in the MD3200_MD3220_NVSRAM_N26X0-784890-004.dlp file).
*** WARNING *** If you have a single controller PowerVault MD3200/MD3220-series storage array you must stop all I/O operations before starting the RAID controller firmware upgrade.