INSTALLATO AUTOMATICAMENTEQuesto file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
'OEM ID' for 12G OEMReady.
Consigliato
Trova il download migliore disponibile per il sistema
Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema
Cerca supporto
Inserisci il modello o il codice di matricola Dell
Nessun risultato trovato. La ricerca non ha prodotto risultati. Modifica la ricerca e riprova.
Questo driver non è compatibile
Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.
Accedi a Windows come amministratore per utilizzare la scansione automatica. Se hai già effettuato l'accesso come amministratore e appare questo messaggio, riavvia il sistema.Il sistema è gestito dall'amministratore IT ed è possibile che le funzionalità siano limitate.
Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.
Correzioni e miglioramenti
OEMReady Madone Identity Module.Fixes: BIOS DUP upgrade issue ( on linux OS , when updating one system at a time) for Factory shipped OEM Ready System.
Enhancement: Added '1 to many' install support for OEM ID ( using PM DUP).
Dell Technologies consiglia di rivedere questo aggiornamento per stabilire se è applicabile al sistema. L'aggiornamento contiene modifiche che interessano solo alcune configurazioni oppure offre nuove funzioni applicabili o meno all’ambiente in questione.
Formato file:Pacchetto di aggiornamento per Microsoft Windows a 32 bit
Nome file:Identity-Module_Application_CC02V_WN32_1.01_A00.EXE
Dimensioni file:7.96 MB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
I pacchetti di aggiornamenti Dell (DUP) in formato Microsoft Windows a 32 bit sono stati progettati per essere eseguiti su sistemi operativi Microsoft Windows a 64 bit. I pacchetti di aggiornamenti Dell (DUP) in formato Microsoft Windows a 64 bit verranno eseguiti solo su sistemi operativi Microsoft Windows a 64 bit. Quando si seleziona un aggiornamento dei driver di un dispositivo, assicurarsi di selezionare quello appropriato per il sistema operativo in uso.
Formato file:Un file GnuPG contenente una firma crittografica
Nome file:Identity-Module_Application_CC02V_LN_1.01_A00.BIN.sign
Dimensioni file:194 Bytes
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
La firma GnuPG per il pacchetto di aggiornamento per Red Hat Linux può essere utilizzata per autenticare l'identità di Dell nel relativo pacchetto di aggiornamento per Red Hat Linux.
Formato file:Pacchetto di aggiornamento per Red Hat Linux
Nome file:Identity-Module_Application_CC02V_LN_1.01_A00.BIN
Dimensioni file:6.63 MB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
I pacchetti Dell Update Packages per Linux possono essere utilizzati come applicazioni standalone che assicurano che vengano soddisfatti criteri di convalida specifici prima di eseguire un aggiornamento. Nota: i pacchetti di aggiornamento per Linux sono open source. Informazioni dettagliate sono contenute nel file leggimi dei pacchetti Dell Update Packages per Linux.
PREPARATION: 1) Ensure system is already Debranded and the file is for your platform. 2) Note any iDRAC user settings that are important for your specific usage. 'Reset iDRAC to Default Settings' is needed for this installation and will set iDRAC user settings ( outside Identity Module) to revert to Std Dell Defaults.
INSTALLATION: 1) Ensure Identity Module's exe file does not have "BSU" ( Board Service Util) in its file name. 2) Extract .pm from the zip pack exe. 3) Login to iDRAC web GUI , navigate to 'Update and Rollback' link on left pane. 4) Using 'Firmware Update' tab, browse to the "Cust" .pm file and upload it. 5) Under the 'Update Details' section, select your .pm file. Ensure 'Current' and 'Available' revisions are as expected. 6) Click 'Install' button. 7) Go to 'Job Queue' tab and wait for your install job to change from 'New' to 'Completed'. 8) Navigate to 'Troubleshooting' link on left pane. Click on 'Diagnostic' tab on right. Click on 'iDRAC rest to Default Settings' link. Note: This step will set V4 DHCP to Std Dell's default value of disabled. Wait for iDRAC reboot to complete ( about 4 minutes ).Enable V4 DHCP (assuming that was current setting). 11) Reboot the system.Wait for System to complete followed by one more self-reboot before you see updated BIOS splash logo. 12) Verify that the tab -->'System Inventory' --> 'Firmware Inventory' shows 'Identity Module' as a component with new revision. 13) Verify the Branding changes ( on iDrac GUI and System) are working. 14) Restore ( if any ) iDRAC user settings that were noted during 'Preparation' above.
Note: 1) None of the below methods using DUP are supported for users upgrading from OEMReady rev 1.0 to rev 1.01. These are listed here for those users trying to switch back to rev 1.01 from a later revision of OEM Ready. 2)For users upgrading from OEMReady revision 1.0, using "Cust" .pm file is the only supported method. 3) All below methods are for updating installed Identity Module and not for Fresh Install.
PREPARATION: 1) Ensure you have IdentityModule DUP for the appropriate 12G platform and that your system is already Debranded using atleast OEMReady Identity Module revision 1.01. 2) Ensure you have iDRAC revision 1.30.30 or later and Lifecycle Controller revision 1.1.1.18 or later. 3) Ensure you have appropriate windows or Linux IdentityModule DUP matching your OS.
INSTALLATION ( OS DUP method ) :
1) Refer to "Dell Update Packages Version 7.2 User's Guide" or later found on Dell's support site http://www.dell.com/support/home .
INSTALLATION ( Remote Enablement method): 1) Please request latest '12G_Dell_OEM_IdentityModule_One_to_Many_Update" document from Dell OEM team.
INSTALLATION ( iDRAC GUI method):
Note: Only windows DUP are supported for this method. 1) Login to Idrac GUI. Navigate to 'Update and Rollback' link and using "Firmware Update" tab, browse to the windows DUP on your machine. 2) Upload the windows DUP and confirm "Package successfully downloaded" message under 'Update details'. 3) Click on 'Install next reboot' or 'Install and Reboot' button as appropriate. 4) Navigate to 'Job Queue' page and confirm that the job completed. 5) Let the iDRAC reboot complete ( depending upon install option you chose in step 3). 6) Reboot host. 7) Verify the Branding changes ( on iDrac GUI and System) are working.
******************* "Cust BSU ".exe (Board Service Utility) *******************
Important Notes: 1. This utility should only be used for installing after motherboard replacement and by Dell OEM Service team ( using 'MotherBoard Replacement' steps). Use of this utility for other purposes may render the current application inoperable. Please consult your support/services before using this utility.