Dell TL2000/4000, v.9t30, A12

INSTALLATO AUTOMATICAMENTE Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
Firmware update for the TL2000/TL4000 Tape Library and drives that fix an issue where the RMU would become inaccessible.
Dell PowerVault TL2000/TL4000 Library and Drive Firmware Release A12 (September '10)and ITDT-DCR1.2.0.006

FW Revisions:
Library FW = 9T30
Drive FW:
LT03 FH drives = 93G6
LT03 HH drives = 93G7
LT04 FH drives = A232
LT04 HH drives = A233
LTO5 drives = A422
Consigliato

Trova il download migliore disponibile per il sistema

Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema

Cerca supporto

Inserisci il modello o il codice di matricola Dell

Desideri cercare il tuo prodotto? Inserisci l'ID del prodotto. Mostrami come procedere

Questo driver non è compatibile

Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.

Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.

Correzioni e miglioramenti

Fixed an issue where the RMU would become inaccessible.
Più dettagli

Versione

9t30, A12

Data di rilascio

07 ago 2012

Tipo di download

Firmware

Categoria

Automazione nastro

Importanza

Urgente
Dell Technologies consiglia vivamente di eseguire questo importante aggiornamento il più presto possibile. L'aggiornamento contiene modifiche e correzioni di bug fondamentali per migliorare la funzionalità, l'affidabilità e la stabilità del sistema Dell. Inoltre è possibile che includa correzioni di sicurezza e altri miglioramenti di funzioni.
Formati disponibili Visualizza le informazioni importanti

Formato file: ZipPack esterno
Nome file: R282043.exe
Dimensioni file: 73.05 MB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
Questo file contiene un set compresso di file. Scaricare il file in una cartella sul disco rigido, quindi eseguirlo (fare doppio clic) per decomprimere il set di file. Seguire le istruzioni per completare l'installazione.
Per assicurare l'integrità del download, verificare il valore del checksum.
MD5:
486c8689ce6fc4b1497ff7830dd7182a
SHA1:
86a1b98ea513214cc7aeaf2cc678f4bc46453a2f
SHA-256:
f8f05e78c8cca1ecded853e4885f0e6f6d05022293de1ae840ce017263637c7f

Con il download l'utente accetta i termini del Contratto di licenza del software Dell. (in Inglese)

Ulteriori dettagli

Mostra tutto | Nascondi tutto
Dell PowerVault TL2000/TL4000 will change unique ID when the library firmware is upgraded from 5.80 or earlier to 6.60 or later. This change is a result of the IPv6 DOD implementation. As a result of the FIRMWARE upgrade the library will acquire a new IP address if set in DHCP mode; please ensure user has access to the library Operator Control Panel (OCP) in order to acquire the new DHCP address. This change will not affect libraries set for static IP addresses.
Dell PowerVault TL4000/2000 drive firmware release implemented Federal Information Processing Standards (FIPS), The LT04 and LTO5 drive firmware now contains a digital signature. Drive firmware signature is transparent to the user and backup application. The signature provides protection against firmware or device tampering; as a result a firmware upgrade to an unsigned firmware version is prohibited. If you require assistance, please contact Dell technical support.
Provides support for the new Library Controller Board (LCB)
See Dell PowerVault A07 Release Notes December'08 file for a full release details
To install ITDT, a suitable version of Java is required for both Windows and Linux.

***** LINUX INSTALLATIONS ONLY *****

The default install location for the current release of ITDT has changed in Linux based installations.

The previous destination was: /opt/dell/dvtd/jre Whereas the current default location is: /opt/dell/itdt_dcr/jre

The symbolic link creation example for ITDT in Section 2.1 of the readme file should be:

IBM JRE:
$ ln -sf /opt/IBMJava2-142/jre /opt/dell/itdt_dcr/jre Sun Microsystems JRE:
$ ln -sf /usr/java/j2re1.4.2_09 /opt/dell/itdt_dcr/jre
KIT,ACC,EN,ACTVN,TL2K,SLVR
KIT,ACC,EN,ACTVN,TL4K,SLVR
TL2000/4000
Hard Drive Installation (via WinZip) with HTML Pop-Up Window

Download
1.Click Download Now, to download the file.
2.When the File Download window appears, click Save this program to
disk (Windows XP users, click Save) and click OK. The Save In: window
appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
name icon appears on your desktop.

Install
1.Double-click the new icon on the desktop
The Self-Extractor window appears.
2.Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to
extract files to C:\DELL\DRIVERS
3.Leave all of the default settings and click Unzip or OK. If the
directory doesn't exist, you'll be prompted to create one. Click Yes. A
Self Extractor window appears and indicates C:\DELL\DRIVERS files were
extracted.
4.Click OK.
Follow the on-screen installation instructions in the window.

HTML Pop-Up With Install Now Button
1.The Dell Software Installation Documentation window appears.
2.Click the Install Now button. A File Download window appears.
3.Click Run this program from its current location and click OK.
The Security Warning window appears.
4.Click Yes. The InstallShield Wizard window appears.
5.Follow the on-screen instructions.

Tutorial e guida ai driver