INSTALLATO AUTOMATICAMENTEQuesto file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
Dell PowerEdge RAID Controller 4/DC firmware and update script for for IA-64 based platforms. The update script runs under EFI.
Version: 351S
Consigliato
Trova il download migliore disponibile per il sistema
Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema
Cerca supporto
Inserisci il modello o il codice di matricola Dell
Nessun risultato trovato. La ricerca non ha prodotto risultati. Modifica la ricerca e riprova.
Questo driver non è compatibile
Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.
Accedi a Windows come amministratore per utilizzare la scansione automatica. Se hai già effettuato l'accesso come amministratore e appare questo messaggio, riavvia il sistema.Il sistema è gestito dall'amministratore IT ed è possibile che le funzionalità siano limitate.
Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.
Correzioni e miglioramenti
Current Firmware - 351S (Previous - 350O)
Current BIOS - 1.10 (Previous - 1.09)
Current Ctrl-M - U827 (Previous - U821)
Current Boot Block - 1.7.7Dell (Previous - 1.7.6Dell)
Fixes
1. Fixed an issue that optimized cache flush algorithms while switching between no read-ahead to read-ahead cache modes. 2. Modified the Fast Initialization function to delete all operation system partition table information. 3. Fixed an issue where a Seagate hard drive model M3637 was not negotiating correctly with PERC 4 adapters. 4. Fixed a SES Timeout error caused by a media error recovery defect in cluster mode on a PERC4/DC and a PERC3/DC. 5. Modified Ctrl-M to clear physical drive media error count upon drive replacement. Note: System must be powered on during the drive replacement in order for media errors to be cleared. 6. Modified caching algorithms to not switch from Write-back to Write-through during a battery fast charge. 7. Fixed a performance degradation issue when using RAID 10 virtual disks, when configured to use no read ahead or write caching and direct IO on PERC4 controllers.
Enhancements
1. Added Patrol Read feature. Patrol Read involves the review of the system for possible hard drive errors that could lead to drive failure, then action to correct the errors. The goal is to protect data integrity by detecting physical drive failures before the failures can damage data. Patrol Read adjusts the amount of RAID controller resources dedicated to Patrol Read operations based on outstanding disk I/O. 2. Added Rebuild Checkpoint feature. The Dell PERC firmware has a feature to resume a rebuild on a physical drive in case of an abrupt power loss or if the server rebooted in the middle of a rebuild operation. 3. Enhanced write algorithms to increase I/O performance for RAID 5 and RAID 50 virtual disks using four or more disks that are configured to use write-through write cache mode.
Firmware upgrade while controller is doing background I/O task: The firmware upgrade may fail if any of the RAID controllers in the system are performing an I/O background task. (ie. check consistency, background initialization, rebuild, or reconstruction). Allow the background task to complete before attempting to upgrade the firmware. Patrol Read tasks will not affect a firmware upgrade. Current RAID configuration will not be modified or cleared during the Firmware Upgrade process.
Dell Technologies consiglia di eseguire questo aggiornamento nel prossimo ciclo di aggiornamenti pianificato. L'aggiornamento contiene modifiche per preservare l’integrità generale del sistema. Inoltre, garantisce che il software di sistema resti aggiornato e compatibile con altri moduli di sistema (firmware, BIOS, driver e software) e includa nuove funzioni.
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
Questo file contiene un set compresso di file. Scaricare il file in una cartella sul disco rigido, quindi eseguirlo (fare doppio clic) per decomprimere il set di file. Seguire le istruzioni per completare l'installazione.
1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to unzip the files. 4. Click on the OK button to extract files. After the files are extracted the message all files were successfully unzipped will appear. 5. Click the OK button to exit from the installer.
Installation
To update the firmware for your PERC 4/DC adapter, perform the following steps: 1. Extract the contents of the firmware package to your hardrive. 2. Copy the contents of the package to a formatted floppy disk, USB key, or CD-ROM. 3. Power on the server. From the EFI Boot Manager Menu, select EFI Shell. 4. Insert the media which contains the firmware update files from step 2. This may be a USB key, floppy diskette (a USB floppy drive may be used), or CD-ROM. 5. At the Shell> prompt, type 'map -r' to view all mounted devices. Locate the device which contains the firmware update files - it will be enumerated as fs0, fs1, ect. 6. To change to the proper device, type 'fs1:' NOTE: Your device may have a different file system number. 7. From the fs1:> prompt type 'percupd.nsh' to initiate the firmware update. 8. Follow the instructions from the EFI update tool to complete the firmware upgrade. 9. You will need to restart your system for the new firmware to take effect.
Custom Instructions for perc4dc-IA64-351S-A05.txt:
Download the readme file to view information about this release.