Dell Microsoft Hotfix and KB Updates for NAS, v.1.1.0.0, A00
INSTALLATO AUTOMATICAMENTE Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
This contains Windows Storage Server 2008 Update 1 and Update 2 which consist of updates for the following issues:
• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
Consigliato
Trova il download migliore disponibile per il sistema
Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistemaCerca supporto
Inserisci il modello o il codice di matricola Dell
Desideri cercare il tuo prodotto? Inserisci l'ID del prodotto. Mostrami come procedere
Questo driver non è compatibile
Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.
Accedi a Windows come amministratore per utilizzare la scansione automatica. Se hai già effettuato l'accesso come amministratore e appare questo messaggio, riavvia il sistema. Il sistema è gestito dall'amministratore IT ed è possibile che le funzionalità siano limitate.
Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.
Correzioni e miglioramenti
This contains Windows Storage Server 2008 Update 1 and Update 2 which consist of updates for the following issues:
• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
Più dettagli• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
Versione
1.1.0.0, A00
Data di rilascio
12 apr 2010
Tipo di download
Applicazioni
Categoria
Sistema operativo
Importanza
ConsigliatoDell Technologies consiglia di eseguire questo aggiornamento nel prossimo ciclo di aggiornamenti pianificato. L'aggiornamento contiene modifiche per preservare l’integrità generale del sistema. Inoltre, garantisce che il software di sistema resti aggiornato e compatibile con altri moduli di sistema (firmware, BIOS, driver e software) e includa nuove funzioni.
Formati disponibili
Formato file: Pacchetto di aggiornamento per Microsoft Windows a 32 bit
Nome file: APP_WIN_R255746.EXE
Dimensioni file: 4.21 MB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
I pacchetti di aggiornamenti Dell (DUP) in formato Microsoft Windows a 32 bit sono stati progettati per essere eseguiti su sistemi operativi Microsoft Windows a 64 bit. I pacchetti di aggiornamenti Dell (DUP) in formato Microsoft Windows a 64 bit verranno eseguiti solo su sistemi operativi Microsoft Windows a 64 bit. Quando si seleziona un aggiornamento dei driver di un dispositivo, assicurarsi di selezionare quello appropriato per il sistema operativo in uso.
Per assicurare l'integrità del download, verificare il valore del checksum.
MD5:
84EDDC6DD74CAD8EFBA0EE16E185B504
SHA1:
Non disponibile
SHA-256:
Non disponibile
Con il download l'utente accetta i termini del Contratto di licenza del software Dell. (in Inglese)
Sistemi operativi supportati
Windows Server 2008 x64
Istruzioni di installazione
Custom Instructions for APP_WIN_R255746.EXE:
This release contains updates for the PowerVault NAS Windows Storage Server 2008 based systems.
Download and Install Instructions
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
3. Copy the package to a USB key, removable media, or network share that is accessible by the PowerVault NAS system that will be updated.
4. Log into the PowerVault NAS system and browse for the software package that was downloaded.
5. Double click on the package, only the updates applicable to your Operating System Edition (Basic, Standard, Enterprise) will be installed.
6. If the PowerVault NAS system does not reboot automatically, please reboot the system manually.
This release contains updates for the PowerVault NAS Windows Storage Server 2008 based systems.
Download and Install Instructions
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
3. Copy the package to a USB key, removable media, or network share that is accessible by the PowerVault NAS system that will be updated.
4. Log into the PowerVault NAS system and browse for the software package that was downloaded.
5. Double click on the package, only the updates applicable to your Operating System Edition (Basic, Standard, Enterprise) will be installed.
6. If the PowerVault NAS system does not reboot automatically, please reboot the system manually.
Tutorial e guida ai driver
Per ulteriori download visitare Driver e download. Per aiuto sull'utilizzo delle informazioni presenti su questa pagina, visitare il sito Web Tutorial e Guida ai driver.