Dell MD3000i iSCSI RAID Controller, v.07.35.39.64, A13
INSTALLATO AUTOMATICAMENTE Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
#######################################################################
Dell PowerVault MD3000i Firmware Generation 2
#######################################################################
======================================================================
Contents
======================================================================
1. Files included in this package
2. Fixes / Enhancements
3. Important Information
4. Firmware upgrade instructions
5. MD1000 Firmware upgrade instructions
======================================================================
1. Files included in this package
======================================================================
Included in your firmware package are the following files:
Dual_Controller_MD3000i_N1532-735890-005.dlp :
Duplex NVSRAM for MD3000i configured with two
controllers
Single_Controller_MD3000i_N1532-735890-905.dlp :
Simplex NVSRAM for MD3000i configured with a single controller
MD3000i_FW_RC_07353964_1532.dlp : RAID Controller Firmware
MD1000_A04.bin: MD1000 Firmware
======================================================================
2. Fixes / Enhancements
======================================================================
07.35.39.64
-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.38.60
-----------
Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays
- This support is only for OSes common to both the MD3000 and MD3200 Series arrays
- This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems
- SLES 10 SP3
- SLES 11
- SLES 11 SP 1
- RHEL 5 SP 4
- RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Please refer to the Dell PowerVault MD3000i RAID Enclosure Hardware
Owner's Manual for removal and installation instructions.
======================================================================
3. Important Information
======================================================================
NOTICE: Prior generation firmware is indicated by version that begins
with 06.xx.xx.xx, and the Generation 2 firmware starts with
07.xx.xx.xx. Existing hardware can be upgraded to the Generation 2
firmware. If updating from 06.xx.xx.xx version to 07.xx.xx.xx version,
the upgrade is one way only; it is not possible to return to prior
generation after starting this upgrade procedure.
NOTICE: Ensure that all Dell PowerVault MD1000 expansion enclosures
being connected to the MD3000i are updated to the latest Dell
PowerVault MD1000 EMM Firmware from support.dell.com. Dell
PowerVault MD1000 EMM Firmware version A03 is the minimum required
firmware level to support connection to the MD3000i array; attaching
an MD1000 with unsupported firmware causes an uncertified condition to
exist on the array. See the updated Hardware Owner''''s Manual on
http://support.dell.com for more information.
NOTICE: Ensure to check the MD3000i system support matrix on
support.dell.com prior to connecting MD1000 enclosures to an MD3000i
to ensure supported drives and firmware versions are used.
======================================================================
4. Firmware upgrade instructions
======================================================================
IMPORTANT: It is highly recommended to gather support information from
the "Support" tab of the MD Storage Manager prior to performing any
firmware upgrade operations. This can also be achieved thro
Dell PowerVault MD3000i Firmware Generation 2
#######################################################################
======================================================================
Contents
======================================================================
1. Files included in this package
2. Fixes / Enhancements
3. Important Information
4. Firmware upgrade instructions
5. MD1000 Firmware upgrade instructions
======================================================================
1. Files included in this package
======================================================================
Included in your firmware package are the following files:
Dual_Controller_MD3000i_N1532-735890-005.dlp :
Duplex NVSRAM for MD3000i configured with two
controllers
Single_Controller_MD3000i_N1532-735890-905.dlp :
Simplex NVSRAM for MD3000i configured with a single controller
MD3000i_FW_RC_07353964_1532.dlp : RAID Controller Firmware
MD1000_A04.bin: MD1000 Firmware
======================================================================
2. Fixes / Enhancements
======================================================================
07.35.39.64
-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.38.60
-----------
Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays
- This support is only for OSes common to both the MD3000 and MD3200 Series arrays
- This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems
- SLES 10 SP3
- SLES 11
- SLES 11 SP 1
- RHEL 5 SP 4
- RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Please refer to the Dell PowerVault MD3000i RAID Enclosure Hardware
Owner's Manual for removal and installation instructions.
======================================================================
3. Important Information
======================================================================
NOTICE: Prior generation firmware is indicated by version that begins
with 06.xx.xx.xx, and the Generation 2 firmware starts with
07.xx.xx.xx. Existing hardware can be upgraded to the Generation 2
firmware. If updating from 06.xx.xx.xx version to 07.xx.xx.xx version,
the upgrade is one way only; it is not possible to return to prior
generation after starting this upgrade procedure.
NOTICE: Ensure that all Dell PowerVault MD1000 expansion enclosures
being connected to the MD3000i are updated to the latest Dell
PowerVault MD1000 EMM Firmware from support.dell.com. Dell
PowerVault MD1000 EMM Firmware version A03 is the minimum required
firmware level to support connection to the MD3000i array; attaching
an MD1000 with unsupported firmware causes an uncertified condition to
exist on the array. See the updated Hardware Owner''''s Manual on
http://support.dell.com for more information.
NOTICE: Ensure to check the MD3000i system support matrix on
support.dell.com prior to connecting MD1000 enclosures to an MD3000i
to ensure supported drives and firmware versions are used.
======================================================================
4. Firmware upgrade instructions
======================================================================
IMPORTANT: It is highly recommended to gather support information from
the "Support" tab of the MD Storage Manager prior to performing any
firmware upgrade operations. This can also be achieved thro
Consigliato
Trova il download migliore disponibile per il sistema
Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistemaCerca supporto
Inserisci il modello o il codice di matricola Dell
Desideri cercare il tuo prodotto? Inserisci l'ID del prodotto. Mostrami come procedere
Questo driver non è compatibile
Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.
Accedi a Windows come amministratore per utilizzare la scansione automatica. Se hai già effettuato l'accesso come amministratore e appare questo messaggio, riavvia il sistema. Il sistema è gestito dall'amministratore IT ed è possibile che le funzionalità siano limitate.
Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.
Correzioni e miglioramenti
07.35.39.64
-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.38.60
-----------
Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays
- This support is only for OSes common to both the MD3000 and MD3200 Series arrays
- This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems
- SLES 10 SP3
- SLES 11
- SLES 11 SP 1
- RHEL 5 SP 4
- RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Please refer to the Dell PowerVault MD3000i RAID Enclosure Hardware
Owner''s Manual for removal and installation instructions.
Più dettagli-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.38.60
-----------
Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays
- This support is only for OSes common to both the MD3000 and MD3200 Series arrays
- This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems
- SLES 10 SP3
- SLES 11
- SLES 11 SP 1
- RHEL 5 SP 4
- RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Please refer to the Dell PowerVault MD3000i RAID Enclosure Hardware
Owner''s Manual for removal and installation instructions.
Versione
07.35.39.64, A13
Data di rilascio
26 set 2011
Tipo di download
Firmware
Categoria
RAID iSCSI
Importanza
ConsigliatoDell Technologies consiglia di eseguire questo aggiornamento nel prossimo ciclo di aggiornamenti pianificato. L'aggiornamento contiene modifiche per preservare l’integrità generale del sistema. Inoltre, garantisce che il software di sistema resti aggiornato e compatibile con altri moduli di sistema (firmware, BIOS, driver e software) e includa nuove funzioni.
Formati disponibili
Formato file: Estrae file direttamente sul disco locale
Nome file: MD3000i-CFW-NVSRAM_07353964_A13_R315164.zip
Dimensioni file: 14.2 MB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
Questo formato di file è costituito da un archivio di file che possono essere decompressi in una directory sul disco rigido. L'installazione può essere quindi eseguita da tale directory.
Per assicurare l'integrità del download, verificare il valore del checksum.
MD5:
d907852c2f8ed6c6a9e779293fffd40f
SHA1:
Non disponibile
SHA-256:
Non disponibile
Con il download l'utente accetta i termini del Contratto di licenza del software Dell. (in Inglese)
Sistemi operativi supportati
non applicabile
Si applica a
ASSY,ENCL,CTL,DX,MD3000I
ASSY,ENCL,CTL,SPL,MD3000I
Istruzioni di installazione
Custom Instructions for MD3000i-CFW-NVSRAM_07353964_A13_R315164.zip:
Download:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
Extract Files:
6) Browse to the location where you downloaded the file and double-click the open the zip file.
7) Unzip to extract the files to a specified location.
Download:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
Extract Files:
6) Browse to the location where you downloaded the file and double-click the open the zip file.
7) Unzip to extract the files to a specified location.
Tutorial e guida ai driver
Per ulteriori download visitare Driver e download. Per aiuto sull'utilizzo delle informazioni presenti su questa pagina, visitare il sito Web Tutorial e Guida ai driver.