Dell NMC,UPS,FW (H910P), v.01.10.0005, A03

INSTALLATO AUTOMATICAMENTE Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
UPS Firmware for Network Management Card
Consigliato

Trova il download migliore disponibile per il sistema

Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema

Cerca supporto

Inserisci il modello o il codice di matricola Dell

Desideri cercare il tuo prodotto? Inserisci l'ID del prodotto. Mostrami come procedere

Questo driver non è compatibile

Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.

Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.

Correzioni e miglioramenti

Corrects the following:

SSL certificate handling fixed to now only issue a new certificate if the IP address changes so that the user does not get prompted with a certificate warning message with every communication reset or restart of the card. NOTE: The warning security warning message issued by browsers is normal when entering SSL mode because the NMC uses a self-certified.

Fixed issue that could limit the number of NMS allowable to less than 3. Now the user can always configure 1, 2 or 3 Network Monitoring Services (NMS) as intended.

Firmware now checks to see if a configured username and password is using restricted extended ASCII codes and alerts users that they are not permitted. This ASCII character checking was missing in the previous Firmware which could potentially allow a user to lock them out of the card if they used an unsupported
Più dettagli

Versione

01.10.0005, A03

Data di rilascio

21 ott 2011

Tipo di download

Firmware

Categoria

Firmware del dispositivo

Importanza

Consigliato
Dell Technologies consiglia di eseguire questo aggiornamento nel prossimo ciclo di aggiornamenti pianificato. L'aggiornamento contiene modifiche per preservare l’integrità generale del sistema. Inoltre, garantisce che il software di sistema resti aggiornato e compatibile con altri moduli di sistema (firmware, BIOS, driver e software) e includa nuove funzioni.
Formati disponibili

Formato file: ZipPack esterno
Nome file: DELL_NMC-UPS-FW--H910P-_A03_R318026.exe
Dimensioni file: 1.42 MB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
Questo file contiene un set compresso di file. Scaricare il file in una cartella sul disco rigido, quindi eseguirlo (fare doppio clic) per decomprimere il set di file. Seguire le istruzioni per completare l'installazione.
Per assicurare l'integrità del download, verificare il valore del checksum.
MD5:
Non disponibile
SHA1:
Non disponibile
SHA-256:
Non disponibile

Con il download l'utente accetta i termini del Contratto di licenza del software Dell. (in Inglese)

Ulteriori dettagli

Mostra tutto | Nascondi tutto
Red Hat® Enterprise Linux 2.1
Red Hat® Enterprise Linux 3
Red Hat® Enterprise Linux 4
Red Hat® Linux 7.0
Red Hat® Linux 7.1
Red Hat® Linux 7.2
Red Hat® Linux 7.3
Red Hat® Linux 8.0
Red Hat® Linux 9.0
Windows Vista, 32-bit
Windows Server 2003
MS Windows Vista a 64 bit
Windows XP
Windows Server 2003 x64
Windows XP, 64-bit
Hard Drive Installation (via WinZip) with Setup.exe File for DELL_NMC-UPS-FW--H910P-_A03_R318026.EXE

Download

1.Click Download Now, to download the file.
2.When the File Download window appears, click Save (Windows XP
users will click Save) this program to disk and click OK. The Save In:
window appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
icon appears on your desktop.

Install

1.Double-click the new icon on the desktop labeled DELL_NMC-UPS-FW--H910P-_A03_R318026.EXE.
2.The Self-Extracting window appears and prompts you to extract or
unzip to C:\DELL\DRIVERS\R318026. Write down this path so the executable (I.e.
Setup.exe) file can be found later.
3.The Self-Extractor window appears.
4.Click OK.
5.After completing the file extraction, if the Self-Extractor
window is still open, close it.
6.Click the Start button and then click Run.
7.Type C:\DELL\DRIVERS\R318026 in the Open textbox and then click OK.
8.Follow the on-screen installation instructions.

Tutorial e guida ai driver