Dell PowerVault 224F/660F SES Firmware, v. 1.9.5, A01

INSTALLATO AUTOMATICAMENTE Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
SES 1.9.5 Test Release Notes

The SES195.bin file is the required file for the download. It is highly
recommended that all I/O is stopped before beginning this procedure.

You must update the SES firmware on each LS module in the PowerVault 660
and each of the attached enclosures. This includes the 660F as well as all
attached 224F enclosures.

If you are replacing an LS module, or adding new PowerVault 224 units to
an existing subsystem, you should update all LS modules with this firmware.

Enclosure services must be online to update the firmware. If enclosure
services are offline then restore them to the online state before
performing the following procedure.
Consigliato

Trova il download migliore disponibile per il sistema

Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema

Cerca supporto

Inserisci il modello o il codice di matricola Dell

Desideri cercare il tuo prodotto? Inserisci l'ID del prodotto. Mostrami come procedere

Questo driver non è compatibile

Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.

Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.

Correzioni e miglioramenti

Improvements to SES 1.9.5
SES 1.9.5 enhances the communication between SES modules. In the past
there were times when thresholds set on the master SES were not copied to
the slave SES. In a failover scenario the slave would apply the old
values, requiring that the user reset the new thresholds.

SES 1.9.5 enhances reporting so that when an LS module fails, Dell Open
Manage Array Manager can report the problem. The LED for the LS module
will, as in previous versions, still light when an LS module is in a
failed state.

SES 1.9.5 now reports the correct model name of the system, either PV660
or PV224.

In SES 1.3b2, upper warning/critical for LS Module temperature sensors is
45C/55C and for power supply sensors is 55C/65C, which is incorrect. The
correct settings are in SES 1.9.5 and are 35C/45C for the LS module
temperature sensors and 45C/55C for the power supply.
Più dettagli

Versione

1.9.5, A01

Data di rilascio

20 set 2001

Tipo di download

Firmware

Categoria

Fibre Channel

Importanza

Opzionale
Dell Technologies consiglia di rivedere questo aggiornamento per stabilire se è applicabile al sistema. L'aggiornamento contiene modifiche che interessano solo alcune configurazioni oppure offre nuove funzioni applicabili o meno all’ambiente in questione.
Formati disponibili

Formato file: Estrae file direttamente sul disco locale
Nome file: SES_195.exe
Dimensioni file: 115.92 KB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
Questo formato di file è costituito da un archivio di file che possono essere decompressi in una directory sul disco rigido. L'installazione può essere quindi eseguita da tale directory.
Per assicurare l'integrità del download, verificare il valore del checksum.
MD5:
Non disponibile
SHA1:
Non disponibile
SHA-256:
Non disponibile

Con il download l'utente accetta i termini del Contratto di licenza del software Dell. (in Inglese)

Ulteriori dettagli

Mostra tutto | Nascondi tutto
To update the LS module SES firmware, perform the following steps:

1. Start Array Manager on the host system by clicking Start-- Programs--
Dell
OpenManage Applications-- Array Manager-- Array Manager Console.

2. Update the SES firmware on the PowerVault 660F.

a. Click Arrays-- PV660F SubSystem-- Physical Array.

b. Right-click the controller for the subsystem you wish to upgrade and
choose Download-- SES Firmware.

c. Select all the enclosure check boxes and click Next.

d. Click Browse and locate the SES195.bin file. Click Next.

e. Click Finish and OK.

NOTE: This process takes about 8 to 9 minutes for each additional LS
module in
the storage array. If the firmware update does not complete successfully,
repeat
the process until it does. This issue is not a hardware problem, but a
software-timing
issue.

f. After download completes, right-click the PV660F subsystem in Array
Manager and choose Rescan to update the properties information.

g. Right-click the enclosure in Array Manager, choose Properties, and
verify that it is using SES firmware version 1.9.5. If it is not, repeat
the download procedure.

h. Physically remove the primary LS module to cause failover.

i. Right-click the PV660F subsystem in Array Manager and choose Rescan
to update the properties information.

j. Right-click the enclosure and choose Properties to verify its
firmware level is also at version 1.9.5. If it is not, repeat the
download procedure.

k. Replace the LS module that you removed. If you have multiple
enclosures, you must verify the firmware level on every LS module
in the subsystem, one at a time.

Tutorial e guida ai driver