INSTALLATO AUTOMATICAMENTEQuesto file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
LS-120 Drive Firmare Utility
Consigliato
Trova il download migliore disponibile per il sistema
Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema
Cerca supporto
Inserisci il modello o il codice di matricola Dell
Nessun risultato trovato. La ricerca non ha prodotto risultati. Modifica la ricerca e riprova.
Questo driver non è compatibile
Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.
Accedi a Windows come amministratore per utilizzare la scansione automatica. Se hai già effettuato l'accesso come amministratore e appare questo messaggio, riavvia il sistema.Il sistema è gestito dall'amministratore IT ed è possibile che le funzionalità siano limitate.
Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.
Correzioni e miglioramenti
This utility updates the firmware on the LS-120 Drive, DP/N 042YKW, used on the Dell PowerEdge 7150 platform. It must be run from the EFI shell.
Dell Technologies consiglia di rivedere questo aggiornamento per stabilire se è applicabile al sistema. L'aggiornamento contiene modifiche che interessano solo alcune configurazioni oppure offre nuove funzioni applicabili o meno all’ambiente in questione.
Formato file:Una o più immagini disco a estrazione automatica all'interno di uno zip a estrazione automatica
Nome file:B6T70600.exe
Dimensioni file:493.5 KB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
Questo file contiene un set compresso di file. Scaricare il file in una cartella sul disco rigido, quindi fare doppio clic su di esso per decomprimere il set di file. Seguire le istruzioni per completare l'installazione.
1. Get 1 blank, formatted floppy disks. 2. Click the new icon on the desktop. The Self-Extractor window appears. 3. Click Setup. An MS-DOS window appears with a message indicating that you need 1 floppy diskettes. 4. Press the [ENTER] key. A message appears prompting you to insert a blank floppy diskette. Insert a floppy disk into the floppy disk drive. 5. Press the [ENTER] key. A message appears indicating that all data on the disk will be erased. 6. Press the [y] key and then press the [ENTER] key. The files are copied to the floppy diskette. Once the files have been copied to the diskette a message appears prompting you to insert the second diskette. 7. Repeat steps 4 – 6 until you reach the end of the diskette set. 8. After all the files have been copied to the last floppy disk, press the [ENTER] key and the MS-DOS window closes.
The unpack utility is DOS based. Run the executable file on a Windows based machine (not IA64), the following files will be unpacked and copied to a standard 1.44MB formatted floppy.
Place the floppy in the Ls-120 drive and Boot to the EFI Boot Manager Screen Select the EFI Boot option Should see the Device mapping table Look for the FS#'s to identify the Floppy, CDROM, and Hard Drives The LS-120 will have a description of Primary Master or Device 00. The Hard Drive will have a description of Scsi or Device 80. The command "map –r" will remap the devices. If the Device 80 or Scsi is FS1 then type: "FS1:" to change to the hard drive. Type: "dir" to print a directory to the screen. This is the main directory where the files should be copied. Should also see the dellup Directory. Copy the five files to the hard drive, (verify fs0 corresponds to the floppy drive) type: "copy fs0:auto.prm" the response should be fs0:\auto.prm -> fs1:\auto.prm[ok]
Type: "update" the utility will begin the following should appear on the screen.
Beginning Update Process New revision (file): C936M924 Old revision (ROM): C932M923
Note: If the Old revision number does not appear here then this drive cannot be updated !
Continue with the update of the Flash-EEPROM? (y/n) Type: "y"
Loader F/W Revision: 101 Erase Processing Erase OK Write Processing Write OK Flash Load: OK
The flash has completed and you are then returned to the EFI Prompt.