American Megatrends (AMI) PERC 2/SC, PERC2/DC, v.6.35.2.32, A02

INSTALLATO AUTOMATICAMENTE Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
Dell PowerEdge RAID Controller 2/DC and 2/SC Device Driver for Windows 2003.

Version 6.35.2.32
Consigliato

Trova il download migliore disponibile per il sistema

Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema

Cerca supporto

Inserisci il modello o il codice di matricola Dell

Desideri cercare il tuo prodotto? Inserisci l'ID del prodotto. Mostrami come procedere

Questo driver non è compatibile

Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.

Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.

Correzioni e miglioramenti

Fixes or Enhancements in this Release

Enhancements:
1) None

Fixes:
1) Minor change to Oemsetup.txt file.

2) Driver no longer filters out all other commands except SCSI READ and SCSI WRITE
Più dettagli

Versione

6.35.2.32, A02

Data di rilascio

15 mar 2004

Tipo di download

Driver

Categoria

RAID SCSI

Importanza

Opzionale
Dell Technologies consiglia di rivedere questo aggiornamento per stabilire se è applicabile al sistema. L'aggiornamento contiene modifiche che interessano solo alcune configurazioni oppure offre nuove funzioni applicabili o meno all’ambiente in questione.
Formati disponibili

Formato file: Pacchetto di aggiornamento per Microsoft Windows a 32 bit
Nome file: RAID-DRVR-R65396.exe
Dimensioni file: 1.09 MB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
I pacchetti di aggiornamenti Dell (DUP) in formato Microsoft Windows a 32 bit sono stati progettati per essere eseguiti su sistemi operativi Microsoft Windows a 64 bit. I pacchetti di aggiornamenti Dell (DUP) in formato Microsoft Windows a 64 bit verranno eseguiti solo su sistemi operativi Microsoft Windows a 64 bit. Quando si seleziona un aggiornamento dei driver di un dispositivo, assicurarsi di selezionare quello appropriato per il sistema operativo in uso.
Per assicurare l'integrità del download, verificare il valore del checksum.
MD5:
174753AA1DFEBE31CF7CF990BA907E0D
SHA1:
Non disponibile
SHA-256:
Non disponibile

Formato file: Estrae file direttamente sul disco locale
Nome file: PERC2-W2K3-6.35-A02.exe
Dimensioni file: 124 KB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
Questo formato di file è costituito da un archivio di file che possono essere decompressi in una directory sul disco rigido. L'installazione può essere quindi eseguita da tale directory.
Per assicurare l'integrità del download, verificare il valore del checksum.
MD5:
Non disponibile
SHA1:
Non disponibile
SHA-256:
Non disponibile

Con il download l'utente accetta i termini del Contratto di licenza del software Dell. (in Inglese)

Ulteriori dettagli

Mostra tutto | Nascondi tutto


Custom Instructions for PERC2-W2K3-6.35-A02.exe:

Dell PowerEdge RAID Controller 2/SC, 2/DC, 4/DC, 4/SC, 3/QC, 3/DC,
3/DCL, 3/SC, 4/DI, and CERC ATA100/4CH, Device Driver for
Windows Server 2003.

Version 6.35.2.32

Download

1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.

Extract Files

1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to unzip the files – the instructions below assume you extract files to a formatted floppy disk.
3. Click on the unzip button to extract files.

Installation

Dell PowerEdge RAID Controller 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC, 4/DI, and CERC ATA100/4CH, Device Driver for Windows Server 2003.

Version 6.35.2.32

Installing on a new driver on a Windows Server 2003 system


1) Boot the system using the Windows Server 2003 CD. As the message "Press F6 if you need to install a third party SCSI or RAID driver." appears, press F6 immediately.

2) Within a few minutes, a screen appears that asks for additional adapters in the system. Choose 'S'.

3) You are prompted for the driver diskette. Insert the PERC/CERC Windows Server 2003 driver diskette in the floppy drive and press Enter.

4) A list of drivers for PERC/CERC controllers appears. Select the right driver for your installed controller and press Enter to load the driver.

5) A statement is presented saying the driver that you provided is older/newer then the Windows driver.

Press 'S' to use the driver on the floppy.

6) Press Enter again to continue installation process as usual.


Adding the PERC/CERC Driver to an Existing Windows Server 2003.


1) Boot the system to Windows 2003. The Found New Hardware Wizard displays.

2) If you are installing the PERC 3/SC, PERC 4/DC, PERC 4/SC, PERC 4/DI or CERC ATA100/4CH, click on Next and skip to step 5. Otherwise, click Cancel on all the new devices.

3) Restart the system from the shutdown menu.

4) The Found New Hardware Wizard displays again when the system boots to Windows Server 2003. Click on Next.

5) Select Search for a suitable driver and click "Next" to continue.

6) Select Floppy disk drive, insert the PERC/CERC Windows 2003 driver diskette created above and click Next to continue.

7) Continue to click on Next and finish the installation.

8) The Found New Hardware Wizard screen appears one time for each PERC 3/SC, PERC 4/SC, PERC 4/DC controller, three times for each PERC 3/DC or PERC 3/DCL controller and four times for each PERC 3/QC. Repeat steps 5 - 7 for each time the wizard displays to complete installation of the card.

9) To confirm driver installation, right click on My Computer and select Manage. Click on Device Manager, then click on SCSI and RAID controllers to see the newly added PERC 3 controller(s) in the list.

After finishing the driver update, YOU MUST REBOOT YOUR SERVER.


Updating the PERC/CERC Driver on an Existing Windows Server 2003.


If your server is already running Windows Server 2003, use the following steps to update the PERC Windows Server 2003 driver.

Note: If your driver supports multiple RAID controllers, make sure to upgrade all the RAID controllers in your system that your driver supports.

1) Insert the PERC/CERC Windows Server 2003 driver diskette.

2) Position the mouse pointer to the my computer icon in the Start menu and right click and select Manage.

3) Position the mouse pointer on Device Manager and click the left mouse button.

4) Position the mouse pointer on SCSI and RAID controllers and double click.

5) Select the PERC controller and double click.

6) Select the Driver tab.

7) Select Update Driver.

The Upgrade Device Driver Wizard disp

Tutorial e guida ai driver