INSTALLATO AUTOMATICAMENTEQuesto file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
Firmware for the PowerVault 128T Library (fibre bridge, picker, and controller), LTO Tape Drive, and SDLT220 Tape Drive.
This new firmware package offers new library firmware to address library picker issues, and new SDLT drive firmware to address stuck tape issues.
Consigliato
Trova il download migliore disponibile per il sistema
Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema
Cerca supporto
Inserisci il modello o il codice di matricola Dell
Nessun risultato trovato. La ricerca non ha prodotto risultati. Modifica la ricerca e riprova.
Questo driver non è compatibile
Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.
Accedi a Windows come amministratore per utilizzare la scansione automatica. Se hai già effettuato l'accesso come amministratore e appare questo messaggio, riavvia il sistema.Il sistema è gestito dall'amministratore IT ed è possibile che le funzionalità siano limitate.
Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.
* Added hourly picker brush maintence cycle when library is idle. This is to prevent build up of oxides on brush which could result in a picker power failure.
* Firmware will try to recover from transport assembly (picker) power failures.
* Java 1.4.1_01 or later runtime plug-in in required to view the RMC after firmware update is complete.
* Fixed ‘transport empty’ errors on moves
* Fixed “Failed to unload tape from drive" error when moving SDLT tapes.
* Fixed intermittent issue where FC devices could be displayed multiple times on the Discovery page.
* Fixed situation in which a large read (>256KB) or other long commands may cause a timeout or overlap condition.
* Fixed "Queue Full" error when ABTS was received for a command that was still active at the drive.
* New default configuration settings for Fibre Bridge:
Number of control LUNs: 0
AF LUN ID: 3
Port Mode: N_Port
The following problems are fixed:
* Improved Read Error Detection
* Corrected a condition in which a false failure is reported during unload scenarios
* Improved small block ( < 32 bytes) write conditions
Dell Technologies consiglia vivamente di eseguire questo importante aggiornamento il più presto possibile. L'aggiornamento contiene modifiche e correzioni di bug fondamentali per migliorare la funzionalità, l'affidabilità e la stabilità del sistema Dell. Inoltre è possibile che includa correzioni di sicurezza e altri miglioramenti di funzioni.
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
Questo file contiene un set compresso di file. Scaricare il file in una cartella sul disco rigido, quindi eseguirlo (fare doppio clic) per decomprimere il set di file. Seguire le istruzioni per completare l'installazione.
Hard Drive Installation (via WinZip) with HTML Pop-Up Window for
R83113.EXE
Download
1.Click Download Now, to download the file.
2.At the Export Compliance Disclaimer window, click Yes, I Accept
this Agreement.
3.When the File Download window appears, click Save this program to
disk (Windows XP users, click Save) and click OK. The Save In: window
appears.
4.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
5.If the Download Complete window appears, click Close. The file
name icon appears on your desktop.
Install
1.Double-click the new icon on the desktop labeled R83113.EXE.
The Self-Extractor window appears.
2.Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to
extract files to C:\DELL\DRIVERS\R83113.
3.Leave all of the default settings and click Unzip or OK. If the
directory doesn't exist, you'll be prompted to create one. Click Yes. A
Self Extractor window appears and indicates C:\DELL\DRIVERS\R83113 files were
extracted.
4.Click OK.
Follow the on-screen installation instructions in the window.