Dell PERC S300 Adapter, PERC S300 Integrated Modular, v.2.0.0-0166+00193000 FW , A06
Riavvio richiestoINSTALLATO AUTOMATICAMENTEQuesto file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
Dell PERC S300 Integrated Modular/ Adapter (Firmware)
Consigliato
Trova il download migliore disponibile per il sistema
Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema
Cerca supporto
Inserisci il modello o il codice di matricola Dell
Nessun risultato trovato. La ricerca non ha prodotto risultati. Modifica la ricerca e riprova.
Questo driver non è compatibile
Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.
Accedi a Windows come amministratore per utilizzare la scansione automatica. Se hai già effettuato l'accesso come amministratore e appare questo messaggio, riavvia il sistema.Il sistema è gestito dall'amministratore IT ed è possibile che le funzionalità siano limitate.
Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.
Correzioni e miglioramenti
- Fix for the System Inventory Collection (RSOD)Red Screen of Death with a S300 controller
- Background Array Scan
- Boot to RD1000 Tape
- Consistency Check startup on existing virtual disks after a new virtual disk is created
- Default VD cache policy is changed to "No caching"
- Support for CougarPoint chipset for S100
- New System support for S300: Coaster, Diamas and Skipper, Slinky
Dell Technologies consiglia di eseguire questo aggiornamento nel prossimo ciclo di aggiornamenti pianificato. L'aggiornamento contiene modifiche per preservare l’integrità generale del sistema. Inoltre, garantisce che il software di sistema resti aggiornato e compatibile con altri moduli di sistema (firmware, BIOS, driver e software) e includa nuove funzioni.
Formato file:Pacchetto di aggiornamento per Microsoft Windows a 32 bit
Nome file:SAS-RAID_Firmware_RPCKX_WN32_2.0.0-016600193000_A06.EXE
Dimensioni file:4.47 MB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
I pacchetti di aggiornamenti Dell (DUP) in formato Microsoft Windows a 32 bit sono stati progettati per essere eseguiti su sistemi operativi Microsoft Windows a 64 bit. I pacchetti di aggiornamenti Dell (DUP) in formato Microsoft Windows a 64 bit verranno eseguiti solo su sistemi operativi Microsoft Windows a 64 bit. Quando si seleziona un aggiornamento dei driver di un dispositivo, assicurarsi di selezionare quello appropriato per il sistema operativo in uso.
Per assicurare l'integrità del download, verificare il valore del checksum.
MD5:
12fa4c9c41fda045590b0f106f846795
SHA1:
54b019b223f864cc9e04125132878644947f0bc1
SHA-256:
Non disponibile
Formato file:ZipPack esterno
Nome file:DELL_MULTI-DEVICE_A06_R300048.exe
Dimensioni file:560.07 KB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
Questo file contiene un set compresso di file. Scaricare il file in una cartella sul disco rigido, quindi eseguirlo (fare doppio clic) per decomprimere il set di file. Seguire le istruzioni per completare l'installazione.
NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.
1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP). 2. Reboot for the new FW take effect 3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares. 4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost) 5. Re-assign (greater than) 2TB SED Hot Spares.
Zip pack:
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to unzip the files. 4. Click onthe OK button to extract files. After the files are extracted the message all files were successfully unzipped will appear. 5. Click the OK button to exit from the installer.
Installation 1. Copy extracted files to bootable media. 2. Reboot system to bootable media. 3. Execute update.bat to perform flash. 5. After flash is complete, remove bootable media. 4. Reboot system for changes to take effect.
Windows Update Package:
Download 1. Click the "Download Now" link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.
Linux Update Package:
Download 1. Click the Download Now linkto download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Read over the release information presented by executing the ./FRMW_LX_RXXXXXX.BIN --version command from the shell. 2. Download and install any prerequisites identified in the above step before proceeding. 3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell. 4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Import the Dell public key. (You only need to do this once on your system.) 2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN.