INSTALLATO AUTOMATICAMENTEQuesto file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.
Dell CERC SATA 1.5/6ch RAID controller Windows 2003 and Windows 2000 device driver.
Consigliato
Trova il download migliore disponibile per il sistema
Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistema
Cerca supporto
Inserisci il modello o il codice di matricola Dell
Nessun risultato trovato. La ricerca non ha prodotto risultati. Modifica la ricerca e riprova.
Questo driver non è compatibile
Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.
Accedi a Windows come amministratore per utilizzare la scansione automatica. Se hai già effettuato l'accesso come amministratore e appare questo messaggio, riavvia il sistema.Il sistema è gestito dall'amministratore IT ed è possibile che le funzionalità siano limitate.
Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.
Correzioni e miglioramenti
This driver is the same code base as previous driver(7010). This package removes the filter driver and the WHQL association with the filter driver in preparation for OM and Longhorn upgrade.
Dell Technologies consiglia di eseguire questo aggiornamento nel prossimo ciclo di aggiornamenti pianificato. L'aggiornamento contiene modifiche per preservare l’integrità generale del sistema. Inoltre, garantisce che il software di sistema resti aggiornato e compatibile con altri moduli di sistema (firmware, BIOS, driver e software) e includa nuove funzioni.
Formato file:Pacchetto di aggiornamento per Microsoft Windows a 32 bit
Nome file:DRVR_WIN_R168588.EXE
Dimensioni file:4.91 MB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
I pacchetti di aggiornamenti Dell (DUP) in formato Microsoft Windows a 32 bit sono stati progettati per essere eseguiti su sistemi operativi Microsoft Windows a 64 bit. I pacchetti di aggiornamenti Dell (DUP) in formato Microsoft Windows a 64 bit verranno eseguiti solo su sistemi operativi Microsoft Windows a 64 bit. Quando si seleziona un aggiornamento dei driver di un dispositivo, assicurarsi di selezionare quello appropriato per il sistema operativo in uso.
Per assicurare l'integrità del download, verificare il valore del checksum.
MD5:
9126A052502C91B8725489E35C3C9E8B
SHA1:
Non disponibile
SHA-256:
Non disponibile
Formato file:ZipPack esterno
Nome file:R168588_A8.exe
Dimensioni file:161.87 KB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
Questo file contiene un set compresso di file. Scaricare il file in una cartella sul disco rigido, quindi eseguirlo (fare doppio clic) per decomprimere il set di file. Seguire le istruzioni per completare l'installazione.
1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.
Instructions for R168588_A8.EXE
Download
1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to unzip the files. 4. Click on the OK button to extract files. After the files are extracted the message all files were successfully unzipped will appear. 5. Click the OK button to exit from the installer.
Installing a Windows Driver for a New RAID Controller:
1. When the controller is added to a server and the operating system detects the controller, click Cancel on All Detected Devices and reboot. 2. The Found New Hardware Wizard screen displays the detected hardware device. Click Next. 3. The screen used to locate the device driver for the hardware device is displayed. 4. Select Search for a Suitable Driver for my Device. Click Next. 5. The Locate Driver Files screen is displayed. 6. Browse to the location where the driver files were saved. 7. Upon installing the drivers, the Completing the Upgrade Device Driver wizard displays the name of the controller. 8. Click Finish to complete the installation.
Updating a Windows Driver for a RAID controller:
1. Under Computer Management, click on Device Manager. Under SCSI and RAID controller, double-click on the appropriate RAID controller. 2. Under the Driver tab, select Update Driver. 3. Use the Hardware Update Wizard that will appear to update the driver. 4. When prompted to select the device driver, browse to the location where the driver files were saved. 5. Upon installing the drivers, the Completing the Hardware Update Wizard screen appears. 6. Click Finish to complete the installation.