Dell SCSI Hard Drive Firmware Utility, A09
INSTALLATO AUTOMATICAMENTE Questo file è stato installato automaticamente come parte di un aggiornamento recente. In caso di problemi, è possibile scaricarlo e reinstallarlo manualmente.È possibile che il contenuto di questa pagina sia stato tradotto automaticamente. Per fornire un feedback, compila il modulo che si trova in fondo alla pagina.
This is a full compilation of all drives and drive firmware supported under SCSI releases. A drive listed in the Fixes/Enhancements secton indicates that it is a new addition to this release. For more details about the other firmware included please download the individual readme file.
Consigliato
Trova il download migliore disponibile per il sistema
Inserisci i dettagli del prodotto per visualizzare le ultime informazioni sui driver per il sistemaCerca supporto
Inserisci il modello o il codice di matricola Dell
Desideri cercare il tuo prodotto? Inserisci l'ID del prodotto. Mostrami come procedere
Questo driver non è compatibile
Questo driver non è applicabile per il prodotto selezionato. Scegli un altro prodotto per inserire nuovamente i dettagli per questo driver o visita la pagina supporto prodotti per visualizzare tutti i driver disponibili per un prodotto diverso.
Accedi a Windows come amministratore per utilizzare la scansione automatica. Se hai già effettuato l'accesso come amministratore e appare questo messaggio, riavvia il sistema. Il sistema è gestito dall'amministratore IT ed è possibile che le funzionalità siano limitate.
Trova ulteriori aggiornamenti. Usa SupportAssist per trovare tutti gli ultimi aggiornamenti dei driver per il tuo dispositivo.
Correzioni e miglioramenti
Fixes:
This is a general maintenance release for SCSI drives. All former firmware releases for all supported SCSI hard drives have been compiled onto one release. Review the text file for information about fixes supported on this release.
This version corrects hang issue found with PERC6/i and PERC5/i controllers after they have been updated to v.6.0.1-0080 and 5.2.1-0067, respectively.
Seagate 10K7 and 15K4 SCSI
New D405/D705 Firmware is available for Seagate 10K7 and 15K4 SCSI.
This release addresses multiple minor fixes for data error handling, detection, and correction, and incorporates changes included in D404/D704, and will update Seagate Cheetah 10K.7 drive model
to firmware version D705 and Cheetah 15K.4 drive models to firmware version D405, respectively.
With D403/D703, under certain rare circumstances a command timeout can possibly lead to drives being taken off-line, or cause the drive to post a SMART trip. Two changes are related to these timeout conditions:
1) idleoperation and commands not being processed properly leading to possible timeout conditions
2) particular error recovery taking longer than timeouts allow.
Seagate 15K.5 SCSI
New D507 Firmware available for Seagate 15K.5 Parallel SCSI Hard Disk Drives
This is a general maintenance release that addresses multiple error handling and recovery enhancements and fixes that are considered to be corner cases but could impact overall performance of the drive. It is an optional upgrade that may be performed for maintenance or troubleshooting reasons.
Fujitsu 10LX SCSI
New 5E03 Firmware is available for Fujitsu 10LX SCSI Hard Disk Drives. This is a general maintenance release that has improved Write recovery, error handling and reporting.
Enhancements:
N/A
Più dettagliThis is a general maintenance release for SCSI drives. All former firmware releases for all supported SCSI hard drives have been compiled onto one release. Review the text file for information about fixes supported on this release.
This version corrects hang issue found with PERC6/i and PERC5/i controllers after they have been updated to v.6.0.1-0080 and 5.2.1-0067, respectively.
Seagate 10K7 and 15K4 SCSI
New D405/D705 Firmware is available for Seagate 10K7 and 15K4 SCSI.
This release addresses multiple minor fixes for data error handling, detection, and correction, and incorporates changes included in D404/D704, and will update Seagate Cheetah 10K.7 drive model
to firmware version D705 and Cheetah 15K.4 drive models to firmware version D405, respectively.
With D403/D703, under certain rare circumstances a command timeout can possibly lead to drives being taken off-line, or cause the drive to post a SMART trip. Two changes are related to these timeout conditions:
1) idleoperation and commands not being processed properly leading to possible timeout conditions
2) particular error recovery taking longer than timeouts allow.
Seagate 15K.5 SCSI
New D507 Firmware available for Seagate 15K.5 Parallel SCSI Hard Disk Drives
This is a general maintenance release that addresses multiple error handling and recovery enhancements and fixes that are considered to be corner cases but could impact overall performance of the drive. It is an optional upgrade that may be performed for maintenance or troubleshooting reasons.
Fujitsu 10LX SCSI
New 5E03 Firmware is available for Fujitsu 10LX SCSI Hard Disk Drives. This is a general maintenance release that has improved Write recovery, error handling and reporting.
Enhancements:
N/A
Versione
A09, A09
Data di rilascio
07 ott 2013
Tipo di download
Utility
Categoria
Unità SCSI
Importanza
ConsigliatoDell Technologies consiglia di eseguire questo aggiornamento nel prossimo ciclo di aggiornamenti pianificato. L'aggiornamento contiene modifiche per preservare l’integrità generale del sistema. Inoltre, garantisce che il software di sistema resti aggiornato e compatibile con altri moduli di sistema (firmware, BIOS, driver e software) e includa nuove funzioni.
Formati disponibili Visualizza le informazioni importanti
Formato file: ZipPack esterno
Nome file: DELL_SCSI-HARD-DRIVE-FIRMWAR_A09_R182831.exe
Dimensioni file: 13.09 MB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
Questo file contiene un set compresso di file. Scaricare il file in una cartella sul disco rigido, quindi eseguirlo (fare doppio clic) per decomprimere il set di file. Seguire le istruzioni per completare l'installazione.
Per assicurare l'integrità del download, verificare il valore del checksum.
MD5:
Non disponibile
SHA1:
Non disponibile
SHA-256:
Non disponibile
Formato file: Note di versione esterne
Nome file: R182831.txt
Dimensioni file: 17.7 KB
File di grandi dimensioni. A seconda della velocità di connessione, l'operazione di download potrebbe richiedere tempo.
Descrizione del formato:
Questo formato di file contiene testo normale che può essere visualizzato con un editor di testo standard.
Per assicurare l'integrità del download, verificare il valore del checksum.
MD5:
a099b079c3033cb3e748839f1c23334a
SHA1:
Non disponibile
SHA-256:
Non disponibile
Con il download l'utente accetta i termini del Contratto di licenza del software Dell. (in Inglese)
Informazioni importanti
Do not power cycle your system while the update is in progress
Sistemi operativi supportati
non applicabile
Istruzioni di installazione
Custom Instructions for DELL_SCSI-HARD-DRIVE-FIRMWAR_A09_R182831.EXE:
NOTE: In order to create the Hard drive firmware update media using this package, this file must be downloaded to and executed on a system running Microsoft Windows. This package can be used to create a bootable USB flash drive, CD, or hard drive image.
Download
1. Select the download method you want to use to retrieve the file - either HTTP or FTP.
2. If the Export Compliance Disclaimer window appears, read the agreement and then select either "I agree" or "I disagree".
3. When the File Download window appears, click Save.
4. From the Save As dialog, select a location and a file name then click "Save".
5. If a Download Complete window appears, click Close.
Hard Drive Firmware Media Creation
1. Browse to the location where you downloaded the file and double-click it to extract the diagnostic files and start the distribution application.
2. Verify that you have the correct diagnostic package by reviewing the information on the dialog box that appears then click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files. After the files are extracted, a message should appear indicating that all files were successfully unzipped.
5. Click the OK button to start the Hard Drive Firmware Package. Follow the on screen prompts to create the media desired.
CD Media Creation
1. Follow your CD writing software vendor's instructions to create a CD from the downloaded .ISO file.
Note: If CD media is viewed using Windows explorer, only the file Booting.txt will be visible. This CD was created using hard-disk emulation.
Running the Hard Drive Firmware Update Utility
1. Insert the media you created.
2. Boot the computer. (You may have to configure the boot order in BIOS setup to boot the media you created before other devices.)
3. Follow the screen prompts to update your drive firmware.
There will be a readme.txt file for DDDP usage and a R162703.txt text file fordrives affected in the location you selected to unzip the files that contains additional and late breaking information. If you need to run the Delivery Package again, you can run the file DDDP.exe from that same location.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------Custom Instructions for R182831.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
NOTE: In order to create the Hard drive firmware update media using this package, this file must be downloaded to and executed on a system running Microsoft Windows. This package can be used to create a bootable USB flash drive, CD, or hard drive image.
Download
1. Select the download method you want to use to retrieve the file - either HTTP or FTP.
2. If the Export Compliance Disclaimer window appears, read the agreement and then select either "I agree" or "I disagree".
3. When the File Download window appears, click Save.
4. From the Save As dialog, select a location and a file name then click "Save".
5. If a Download Complete window appears, click Close.
Hard Drive Firmware Media Creation
1. Browse to the location where you downloaded the file and double-click it to extract the diagnostic files and start the distribution application.
2. Verify that you have the correct diagnostic package by reviewing the information on the dialog box that appears then click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files. After the files are extracted, a message should appear indicating that all files were successfully unzipped.
5. Click the OK button to start the Hard Drive Firmware Package. Follow the on screen prompts to create the media desired.
CD Media Creation
1. Follow your CD writing software vendor's instructions to create a CD from the downloaded .ISO file.
Note: If CD media is viewed using Windows explorer, only the file Booting.txt will be visible. This CD was created using hard-disk emulation.
Running the Hard Drive Firmware Update Utility
1. Insert the media you created.
2. Boot the computer. (You may have to configure the boot order in BIOS setup to boot the media you created before other devices.)
3. Follow the screen prompts to update your drive firmware.
There will be a readme.txt file for DDDP usage and a R162703.txt text file fordrives affected in the location you selected to unzip the files that contains additional and late breaking information. If you need to run the Delivery Package again, you can run the file DDDP.exe from that same location.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------Custom Instructions for R182831.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
Tutorial e guida ai driver
Per ulteriori download visitare Driver e download. Per aiuto sull'utilizzo delle informazioni presenti su questa pagina, visitare il sito Web Tutorial e Guida ai driver.