Adaptec 39160 SCSI Controller - Firmware, v.BIOS v3.10, A03
自動インストール済み このファイルは、最新の更新プログラムの一部として自動的にインストールされました。問題が発生した場合は、手動でダウンロードして再インストールすることができます。このページのコンテンツは自動翻訳されている可能性があります。フィードバックを提供するには、ページの下部にあるフォームに入力してください。
Adaptec 39160 SCSI Controller BIOS
推奨
自動スキャンを使用するには、管理者としてWindowsにサインインしてください。すでに管理者としてサインインしていて、このメッセージが表示されている場合は、再起動してください。 お客様のシステムは貴社のIT管理者によって管理されおり、機能が制限されている可能性があります。
その他のアップデートを見る。SupportAssistを使用すると、お使いのデバイス向けの最新のドライバー アップデートをすべて見つけることができます。
修正と強化
Includes all fixes and enhancements in Dell Special code stream and Adaptec Service Pack code
stream (listed below):
3.0
New Features:
-Single Image
-Supports Int 13h extension : check extension present, AH=30h
-Supports SCSI pass through; Int 13h AH=50h
-PnP header table limit is obtained from system BIOS that support the function "Get Device Count".
- key to toggle color/monochrome video display mode will be removed
-In the Host Adapter Configuration screen, the 'SCSI Termination Level' information will be
removed
-In the Boot Device configuration screen, the 'Select SCSI Peripheral from which to boot' option
will not be available to the systems that support BIOS Boot Specification (BBS).
-In the Boot Device Configuration screen, another option will be added to configure the master
channel for the single image feature; for the Ultra160 dual channel chip, either function can be the master
-In the Advance Configuration Options screen, POST display mode will support silent, normal and
diagnostics menu
-In the Advance Configuration Options screen, 'BIOS support Int 13h extension' will be removed
-In the Disk Utilities screen, the device capacity will displayed up to XXX GB
-In the Disk Utilities screen, the format progress will be displayed if the drive does support
progress status bytes in the sense key
3.10
New Features:
-EFI legacy compliance
Bugs Fixed:
- More robust PnP checking
- El Torito AH=4Ch, Initiate disk emulation and boot
- Allocate EBDA as needed during runtime INT 13h calls
- Fresh installation hangs on Win2k due to conflict with CHIM code
- Display capacity for SAFTE
詳細を見るstream (listed below):
3.0
New Features:
-Single Image
-Supports Int 13h extension : check extension present, AH=30h
-Supports SCSI pass through; Int 13h AH=50h
-PnP header table limit is obtained from system BIOS that support the function "Get Device Count".
-
-In the Host Adapter Configuration screen, the 'SCSI Termination Level' information will be
removed
-In the Boot Device configuration screen, the 'Select SCSI Peripheral from which to boot' option
will not be available to the systems that support BIOS Boot Specification (BBS).
-In the Boot Device Configuration screen, another option will be added to configure the master
channel for the single image feature; for the Ultra160 dual channel chip, either function can be the master
-In the Advance Configuration Options screen, POST display mode will support silent, normal and
diagnostics menu
-In the Advance Configuration Options screen, 'BIOS support Int 13h extension' will be removed
-In the Disk Utilities screen, the device capacity will displayed up to XXX GB
-In the Disk Utilities screen, the format progress will be displayed if the drive does support
progress status bytes in the sense key
3.10
New Features:
-EFI legacy compliance
Bugs Fixed:
- More robust PnP checking
- El Torito AH=4Ch, Initiate disk emulation and boot
- Allocate EBDA as needed during runtime INT 13h calls
- Fresh installation hangs on Win2k due to conflict with CHIM code
- Display capacity for SAFTE
バージョン
BIOS v3.10, A03
リリース日:
06 10月 2004
ダウンロード タイプ
システムBIOS
カテゴリ
非RAID SCSI
重要度
推奨デル・テクノロジーズでは、次に予定されているアップデート時に、このアップデートを適用することをお勧めします。このアップデートには、システム全体の正常性を維持するための変更が含まれています。これにより、システム ソフトウェアが最新の状態に保たれるとともに、システム ソフトウェアと他のシステム モジュール（ファームウェア、BIOS、ドライバー、ソフトウェア）との互換性が維持されます。また、その他の新機能が追加される場合もあります。
利用可能な形式 重要な情報を表示
ファイル形式: 自己解凍型のZipファイルに格納された、1つまたは複数の自己解凍型ディスクイメージ
ファイル名: 160FW310.exe
ファイルサイズ: 293.19 KB
これは大容量ファイルです。接続速度によっては、ダウンロードに時間がかかる場合があります。
フォーマットの説明:
このファイルには、圧縮（zip圧縮）された一連のファイルが含まれています。このファイルをハードドライブ上のフォルダにダウンロードしてからダブルクリックすると、一連のファイルが解凍されます。指示に従ってインストールを完了してください。
ダウンロードの整合性を確認するには、チェックサムの値を検証してください。
MD5:
利用不可
SHA1:
利用不可
SHA-256:
利用不可
ダウンロードすることによって、Dellソフトウェア製品ライセンス契約 (英語で) の条項に同意したことになります。
重要な情報
In order to create this diskette, the file must be downloaded to and executed on a system running
Microsoft Windows.
*NOTE: If the 39160 HBA is NOT the boot controller in your system, it is highly recommended to disable INT13h support (done in the SCSISelect boot time utility - invoked by pressing 'Ctl-A' when prompted to do so during POST) for the 39160 adapter, since this could impact interoperation with the boot controller.
Microsoft Windows.
*NOTE: If the 39160 HBA is NOT the boot controller in your system, it is highly recommended to disable INT13h support (done in the SCSISelect boot time utility - invoked by pressing 'Ctl-A' when prompted to do so during POST) for the 39160 adapter, since this could impact interoperation with the boot controller.
適応先
39160 SCSI Controller - Firmware
インストール手順
Custom Instructions for 160FW310.exe:
NOTE: For PV725N users, please refer to the online documentation "Upgrading your 39160 SCSI card firmware" available in the PV725N User Guides section of http://support.dell.com
Floppy Disk Boot to Disk for 160FW310.exe
Download
IMPORTANT NOTE: For Netware & Linux Users, this diskette creation
file must be downloaded to and executed on a system running Microsoft
Windows 9x or above in order to create the bootable floppy disk.
1. Click Download Now, to download the file.
2. If the Export Compliance Disclaimer window appears, click
Yes, I Accept this Agreement.
3. When the File Download window appears, click Save
(Windows XP users will click Save) this program to disk and click OK. The
Save In: window appears.
4. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close.
The file icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disk.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. A black MS-DOS window appears with a
message indicating that you need 1 floppy diskette.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
Insert a floppy disk into the floppy disk drive.
5. Press the [ENTER] key. A message appears indicating that
all data on the disk will be erased.
6. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette.
7. After all the files have been copied to the floppy disk,
press the [ENTER] key and the MS-DOS window closes.
Install
1. Insert the newly created floppy disk into the Floppy
drive of the system to be upgraded.
2. Reboot your system.
3. Once system has booted to diskette, follow instructions as
they appear on the system console. They will guide you through the
update process, including the subsequent reboots needed to clear the
card of legacy image information. Refer to README.TXT file for more
information.
NOTE: For PV725N users, please refer to the online documentation "Upgrading your 39160 SCSI card firmware" available in the PV725N User Guides section of http://support.dell.com
Floppy Disk Boot to Disk for 160FW310.exe
Download
IMPORTANT NOTE: For Netware & Linux Users, this diskette creation
file must be downloaded to and executed on a system running Microsoft
Windows 9x or above in order to create the bootable floppy disk.
1. Click Download Now, to download the file.
2. If the Export Compliance Disclaimer window appears, click
Yes, I Accept this Agreement.
3. When the File Download window appears, click Save
(Windows XP users will click Save) this program to disk and click OK. The
Save In: window appears.
4. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
5. If the Download Complete window appears, click Close.
The file icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disk.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. A black MS-DOS window appears with a
message indicating that you need 1 floppy diskette.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
Insert a floppy disk into the floppy disk drive.
5. Press the [ENTER] key. A message appears indicating that
all data on the disk will be erased.
6. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette.
7. After all the files have been copied to the floppy disk,
press the [ENTER] key and the MS-DOS window closes.
Install
1. Insert the newly created floppy disk into the Floppy
drive of the system to be upgraded.
2. Reboot your system.
3. Once system has booted to diskette, follow instructions as
they appear on the system console. They will guide you through the
update process, including the subsequent reboots needed to clear the
card of legacy image information. Refer to README.TXT file for more
information.