インテル マトリックス ストレージ マネージャー(デスクトップ)、v.8.9.0.1023、A00
自動インストール済み このファイルは、最新の更新プログラムの一部として自動的にインストールされました。問題が発生した場合は、手動でダウンロードして再インストールすることができます。このページのコンテンツは自動翻訳されている可能性があります。フィードバックを提供するには、ページの下部にあるフォームに入力してください。
Intel Matrix Storage Manager Vista/Win7 64bit Driver (for pre-installation using the F6 method only)
推奨
その他のアップデートを見る。SupportAssistを使用すると、お使いのデバイス向けの最新のドライバー アップデートをすべて見つけることができます。
修正と強化
Initial Release
詳細を見るバージョン
8.9.0.1023, A00
リリース日:
08 9月 2009
ダウンロード タイプ
ドライバ
カテゴリ
ストレージ
重要度
推奨デル・テクノロジーズでは、次に予定されているアップデート時に、このアップデートを適用することをお勧めします。このアップデートには、システム全体の正常性を維持するための変更が含まれています。これにより、システム ソフトウェアが最新の状態に保たれるとともに、システム ソフトウェアと他のシステム モジュール(ファームウェア、BIOS、ドライバー、ソフトウェア)との互換性が維持されます。また、その他の新機能が追加される場合もあります。
ファイル形式: 外付けZipPack
ファイル名: R230360.exe
ファイルサイズ: 352.79 KB
これは大容量ファイルです。接続速度によっては、ダウンロードに時間がかかる場合があります。
フォーマットの説明:
このファイルには、圧縮(zip圧縮)された一連のファイルが含まれています。このファイルをハードドライブ上のフォルダにダウンロードしてから実行(ダブルクリック)すると、一連のファイルが解凍されます。指示に従ってインストールを完了してください。
ダウンロードの整合性を確認するには、チェックサムの値を検証してください。
MD5:
利用不可
SHA1:
利用不可
SHA-256:
利用不可
ダウンロードすることによって、Dellソフトウェア製品ライセンス契約 (英語で) の条項に同意したことになります。
For per-installation using F6 method only:
1. Double click the Release exe file(RXXXXXX.exe) to extract all driver files from the installation package.
2. Create a floppy* containing the following files in the root
directory:
iaAhci.inf, iaAhci.cat,
iaStor.inf, iaStor.cat,
iaStor.sys, and
TxtSetup.oem.
* Note: For Windows Vista you can use a floppy, CD/DVD or USB.
3. For Windows XP or later operating systems:
- At the beginning of the operating system installation,
press F6 to install a third party SCSI or RAID driver.
- When prompted, select 'S' to Specify Additional Device.
- Continue to step 5.
4. For Windows Vista:
- During the operating system installation, after selecting the
location to install Vista, click Load Driver to install a third
party SCSI or RAID driver.
- Continue to step 5.
5. When prompted, insert the media (floppy, CD/DVD
or USB) you created in step 2 and press Enter.
6. At this point you should be presented with a selection
for one of the controllers listed in the Overview (Section 1)
of this document depending on your hardware version and
configuration.
7. Highlight the selection that is appropriate for the
hardware in your system and press Enter.
8. Press Enter again to continue. Leave the floppy disk in
the system until the next reboot as the software will
need to be copied from the floppy disk again when setup
is copying files.
1. Double click the Release exe file(RXXXXXX.exe) to extract all driver files from the installation package.
2. Create a floppy* containing the following files in the root
directory:
iaAhci.inf, iaAhci.cat,
iaStor.inf, iaStor.cat,
iaStor.sys, and
TxtSetup.oem.
* Note: For Windows Vista you can use a floppy, CD/DVD or USB.
3. For Windows XP or later operating systems:
- At the beginning of the operating system installation,
press F6 to install a third party SCSI or RAID driver.
- When prompted, select 'S' to Specify Additional Device.
- Continue to step 5.
4. For Windows Vista:
- During the operating system installation, after selecting the
location to install Vista, click Load Driver to install a third
party SCSI or RAID driver.
- Continue to step 5.
5. When prompted, insert the media (floppy, CD/DVD
or USB) you created in step 2 and press Enter.
6. At this point you should be presented with a selection
for one of the controllers listed in the Overview (Section 1)
of this document depending on your hardware version and
configuration.
7. Highlight the selection that is appropriate for the
hardware in your system and press Enter.
8. Press Enter again to continue. Leave the floppy disk in
the system until the next reboot as the software will
need to be copied from the floppy disk again when setup
is copying files.
Windows 7, 64-bit
MS Windows Vista(64ビット)
Custom Instructions for R230360.exe:
1. Double click the Release exe file(RXXXXXX.exe) to extract all driver files from the installation package.
2. Create a floppy* containing the following files in the root
directory:
iaAhci.inf, iaAhci.cat,
iaStor.inf, iaStor.cat,
iaStor.sys, and
TxtSetup.oem.
* Note: For Windows Vista you can use a floppy, CD/DVD or USB.
3. For Windows XP or later operating systems:
- At the beginning of the operating system installation,
press F6 to install a third party SCSI or RAID driver.
- When prompted, select 'S' to Specify Additional Device.
- Continue to step 5.
4. For Windows Vista:
- During the operating system installation, after selecting the
location to install Vista, click Load Driver to install a third
party SCSI or RAID driver.
- Continue to step 5.
5. When prompted, insert the media (floppy, CD/DVD
or USB) you created in step 2 and press Enter.
6. At this point you should be presented with a selection
for one of the controllers listed in the Overview (Section 1)
of this document depending on your hardware version and
configuration.
7. Highlight the selection that is appropriate for the
hardware in your system and press Enter.
8. Press Enter again to continue. Leave the floppy disk in
the system until the next reboot as the software will
need to be copied from the floppy disk again when setup
is copying files.
1. Double click the Release exe file(RXXXXXX.exe) to extract all driver files from the installation package.
2. Create a floppy* containing the following files in the root
directory:
iaAhci.inf, iaAhci.cat,
iaStor.inf, iaStor.cat,
iaStor.sys, and
TxtSetup.oem.
* Note: For Windows Vista you can use a floppy, CD/DVD or USB.
3. For Windows XP or later operating systems:
- At the beginning of the operating system installation,
press F6 to install a third party SCSI or RAID driver.
- When prompted, select 'S' to Specify Additional Device.
- Continue to step 5.
4. For Windows Vista:
- During the operating system installation, after selecting the
location to install Vista, click Load Driver to install a third
party SCSI or RAID driver.
- Continue to step 5.
5. When prompted, insert the media (floppy, CD/DVD
or USB) you created in step 2 and press Enter.
6. At this point you should be presented with a selection
for one of the controllers listed in the Overview (Section 1)
of this document depending on your hardware version and
configuration.
7. Highlight the selection that is appropriate for the
hardware in your system and press Enter.
8. Press Enter again to continue. Leave the floppy disk in
the system until the next reboot as the software will
need to be copied from the floppy disk again when setup
is copying files.