Dell MD3000iシングル コントローラー交換ユーティリティー、A02
自動インストール済み このファイルは、最新の更新プログラムの一部として自動的にインストールされました。問題が発生した場合は、手動でダウンロードして再インストールすることができます。このページのコンテンツは自動翻訳されている可能性があります。フィードバックを提供するには、ページの下部にあるフォームに入力してください。
MD3000i Single Controller Replacement Utility: This utility updates the firmware and NVSRAM of a replacement controller for an MD3000i in single controller configuration to match the version on the array.
推奨
その他のアップデートを見る。SupportAssistを使用すると、お使いのデバイス向けの最新のドライバー アップデートをすべて見つけることができます。
修正と強化
Provides support for second generation firmware.
Additionally, a serial cable is no longer required to use the utility.
詳細を見るAdditionally, a serial cable is no longer required to use the utility.
バージョン
A02, A02
リリース日:
19 12月 2008
ダウンロード タイプ
ユーティリティ
カテゴリ
システムユーティリティ
重要度
オプションデル・テクノロジーズでは、このアップデートがお使いのシステムに適用されるかどうか確認することをお勧めします。このアップデートには、特定の構成にのみ影響を与える変更が含まれているか、新機能が含まれています。新機能は、使用している環境に適合する場合もありますが、適合しない場合もあります。
ファイル形式: ローカルディスクに直接ファイルを解凍
ファイル名: SCRUtilityA02.zip
ファイルサイズ: 95.17 MB
これは大容量ファイルです。接続速度によっては、ダウンロードに時間がかかる場合があります。
フォーマットの説明:
このファイル形式は、ハードドライブ上のディレクトリに解凍できるファイルのアーカイブです。このディレクトリからインストールを行うことができます。
ダウンロードの整合性を確認するには、チェックサムの値を検証してください。
MD5:
cb0a77bed058612701dd191c612e7ae4
SHA1:
利用不可
SHA-256:
利用不可
ダウンロードすることによって、Dellソフトウェア製品ライセンス契約 (英語で) の条項に同意したことになります。
Custom Instructions for SCRUtilityA02.zip:
The utility can be run from any computer with access to the management port of the storage array by following these steps:
1. Extract all files and folders from the utility .zip file to a temporary location.
2. Navigate to the location of the extracted files.
If you are using a Windows system, run the simplex.bat file.
If you are using a Linux system, execute the simplex.sh file.
A GUI-based wizard will guide you through the remaining steps necessary to update the controller.
3. When the wizard completes, click Finish.
The utility can be run from any computer with access to the management port of the storage array by following these steps:
1. Extract all files and folders from the utility .zip file to a temporary location.
2. Navigate to the location of the extracted files.
If you are using a Windows system, run the simplex.bat file.
If you are using a Linux system, execute the simplex.sh file.
A GUI-based wizard will guide you through the remaining steps necessary to update the controller.
3. When the wizard completes, click Finish.