Seagate ST95005620AS Firmware Update
自動インストール済み このファイルは、最新の更新プログラムの一部として自動的にインストールされました。問題が発生した場合は、手動でダウンロードして再インストールすることができます。このページのコンテンツは自動翻訳されている可能性があります。フィードバックを提供するには、ページの下部にあるフォームに入力してください。
This package provides the Windows/DOS based Seagate ST95005620AS (500G, 2.5", 9.5mm, SATA, 3Gb/s, 7200, 512n, SSH) Firmware Update and is supported on Alienware and Optiplex models that are running the following Operating Systems: DOS, XP, Vista and Windows 7.
推奨
その他のアップデートを見る。SupportAssistを使用すると、お使いのデバイス向けの最新のドライバー アップデートをすべて見つけることができます。
修正と強化
Fixes - Not Applicable Enhancements - Enhanced the hard drive performance
詳細を見るバージョン
DEM4, A01
リリース日:
31 10月 2011
ダウンロード タイプ
ファームウェア
カテゴリ
ストレージ
重要度
推奨デル・テクノロジーズでは、次に予定されているアップデート時に、このアップデートを適用することをお勧めします。このアップデートには、システム全体の正常性を維持するための変更が含まれています。これにより、システム ソフトウェアが最新の状態に保たれるとともに、システム ソフトウェアと他のシステム モジュール(ファームウェア、BIOS、ドライバー、ソフトウェア)との互換性が維持されます。また、その他の新機能が追加される場合もあります。
ファイル形式: ローカルディスクに直接ファイルを解凍
ファイル名: MX35DEM4.zip
ファイルサイズ: 8.64 MB
これは大容量ファイルです。接続速度によっては、ダウンロードに時間がかかる場合があります。
フォーマットの説明:
このファイル形式は、ハードドライブ上のディレクトリに解凍できるファイルのアーカイブです。このディレクトリからインストールを行うことができます。
ダウンロードの整合性を確認するには、チェックサムの値を検証してください。
MD5:
4a00d2d5c264af24c916b99b6a9b4e05
SHA1:
利用不可
SHA-256:
利用不可
ダウンロードすることによって、Dellソフトウェア製品ライセンス契約 (英語で) の条項に同意したことになります。
Windows 7, 32-bit
Windows 7, 64-bit
Windows Vista, 32-bit
MS Windows Vista(64ビット)
Windows XP
Windows XP, 64-bit
Windows based firmware update for ST95005620AS: 1. Download and unzip "MX35DEM4.zip" into your desktop. 2. In "MX35DEM4" folder, please search for the "Windows" folder. 3. Double click "MX000050.EXE" and it will begin to run. On the first screen you will select your language, and then select "OK". The next screen is a warning screen, please read and select "Next" if you agree. The next screen is the License Agreement screen. If you agree, click "I agree" and then click "Next". 4. You will then come to the screen that asks you to close and save all applications and to back up your data. When you are ready to start the firmware update, please check the "Begin firmware update procedure", and then click "Proceed". 5. The system will reboot and load the firmware. Once the firmware update is complete the system will boot up into Windows normally. DOS based firmware update for ST95005620AS: 1. Unzip "MX35DEM4.zip" into your bootable USB key. Boot up the computer with USB key. 2.In "Dos" folder, just type "DEM4.BAT" at the DOS prompt and press the enter key. 3. Your system will now start updating the HDD firmware. Once the firmware update is completed, your system will display a "DRIVE PASSED" message. 4. Remove your USB key, and turn off your system using the computers power button. Once the computer has been powered down, you can now turn the computer on normally.