LSI Logic PERC3/DCL, PERC3/DC, PERC3/QC, PERC3/SC, PERC 4/Di, PERC 4/SC, PERC 4/DC, PERC 4e/DC, Perc 4e/Di, PERC 4e/Si, v.1.03, A02
АВТОМАТИЧЕСКАЯ УСТАНОВКАЭтот файл был автоматически установлен в рамках недавнего обновления. При возникновении каких-либо проблем этот файл можно вручную загрузить и переустановить.
Содержимое этой страницы могло быть автоматически переведено. Чтобы оставить отзыв, заполните форму в нижней части страницы.
Этот файл был автоматически установлен в рамках недавнего обновления. При возникновении каких-либо проблем этот файл можно вручную загрузить и переустановить.
MegaPR for Windows is a utility that allows the user to start and stop Patrol Read on specified PERC controllers from the Windows environment. MegaPR can also display the current status of Patrol Read on a given PERC controller. Online help is available by typing 'MegaPR ?'. For further information concerning Patrol Read, see the latest PERC User's Guide on http://support.dell.com.
Рекомендуется
Найдите наиболее подходящий файл для вашей системы
Введите сведения о вашем продукте, чтобы просмотреть актуальную информацию о драйверах для вашей системы
Поиск по поддержке
Введите сервисный код или модель Dell
Хотите найти свой продукт? Введите идентификатор продукта.Показать как
Результаты не найдены. По вашему запросу ничего найти не удалось. Измените критерии поиска и повторите попытку.
Этот драйвер несовместим
Этот драйвер неприменим к выбранному продукту. Выберите другой продукт, чтобы повторно ввести сведения для данного драйвера, или посетите страницу поддержки продукта, чтобы просмотреть все драйверы для другого продукта.
Войдите в систему Windows с правами администратора, чтобы использовать автоматическое сканирование. Если вы уже вошли в систему с правами администратора и видите это сообщение, перезагрузите компьютер.Вашей системой управляет ИТ-администратор, и возможности могут быть ограниченны.
Дополнительные обновления. Используйте SupportAssist для поиска всех последних обновлений драйверов для вашего устройства.
Dell Technologies рекомендует ознакомиться с этим обновлением, чтобы определить, применимо ли оно к вашей системе. Данное обновление содержит изменения, которые действуют только в определенных конфигурациях, или новые функции, которые могут не подходить для существующей среды.
Формат файла:Извлечение файлов напрямую на локальный диск
Имя файла:MegaPR_Windows_A02.exe
Размер файла:108 KB
Это большой файл. В зависимости от скорости подключения скачивание может занять некоторое время.
Описание формата:
Этот формат файла состоит из архивных файлов, которые могут быть распакованы в каталог на жестком диске. Установка может быть выполнена из этого каталога.
- MegaPR for Windows requires a minimum level of firmware in order to operate with a PERC controller.
- MegaPR for Windows is only supported on firmware versions listed in the MegaPR Release Notes document or later versions. Do not run MegaPR on controllers with firmware older than the versions listed in the Compatibility/Minimum Requirements section of the MegaPR Release Notes.
- MegaPR will display 'Option not supported for adp 0' for any operations attempted when Patrol Read mode for the controller is set to Disable. The adapter number referenced in the message will correspond to the adapter number specified in the MegaPR command. The Patrol Read mode must be set to Auto or Manual for MegaPR to start or stop a PR iteration. To change the Patrol Read mode on an adapter, enter the PERC BIOS configuration utility by pressing CTRL+M at controller initialization during system POST. Go to Objects, and then select the Adapter menu. If multiple adapters are in the server, select the appropriate adapter. Now choose Patrol Read Options. Change the Patrol Read Mode to Auto or Manual. MegaPR will now be able to start, stop, or display status for Patrol Read from Windows.
- Typing 'megapr ?' displays help information for the MegaPR utility. The example given for command specific help displays '-ctlrInfo ?', which is not a supported option. Supported options include -dispPR, -startPR, and -stopPR.
- For further information concerning the MegaPR utility or the Patrol Read feature, see the latest PERC User's Guide on http://support.dell.com.
Download -------- 1. Click the Download Now link to download the file. 2. If the Export Compliance Disclaimer window appears, click the I agree link to accept the agreement. 3. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files ------------- 1. Browse to the location where the file was downloaded and double-click the file to unzip the download package. 2. Specify the location to unzip the files. 3. Click on the unzip button to extract the files.
Files included in this release: -------------------------------
megapr.exe - MegaPR executable file
MegaPR_Windows_A02.txt - MegaPR for Windows readme file
Custom Instructions for MegaPR_Windows_A02.txt:
Download the readme file 'MegaPR_Windows_A02.txt' for information concerning this release.