Dell iDRAC Monolithic release V1.95
재시작 필요 자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
iDRAC6 V1.95
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
Enhancements:
- Creating a partition from an image failed intermittently with Dell supported 8 GB SD card.
- Cannot create Certificate Signing Request (CSR) with remote and local RACADM.
- Cannot perform firmware update using the Web interface with Internet Explorer 10 browser.
- Cannot upload an SSH public key using command racadm sshpkauth if the key does not end with an "=" or "==" at the end of the key string.
- RAC serial redirect prompts for user credential when cfgSerialConsoleNoAuth is enabled.
- Power monitoring graph is not visible in iDRAC6 Web interface with Internet Explorer 10 browser.
- If the user password has (?) character, access is denied for WSMAN commands.
- In iDRAC6 express configuration console/media tab is listed in the system page. The Console/media tab must not be available in iDRAC6 express configuration.
- If is ON on the management station and Virtual Console is launched, and then if any letter is pressed small case letter isdisplayed. If is OFF and any letter is pressed, then Capital letter is displayed.
- The racadm vmdisconnect command from local and Remote racadm displays an error while disconnecting Remote File Share (RFS) attached media-"Error:No Virtual media devices are currently connected". But the media is connected through RFS before executing the command.
- In the iDRAC Web interface -> System Summary page -> Server Health section, the Power Supplies component health status displays as critical health instead of warning health in the absence of redundant power supply.
- Hardware inventory page in iDRAC Web interface displays information for two Power Supply Units (PSUs) when only one is present.
- Broadcom NIC Firmware Version in the iDRAC Web interface -> System Inventory page is not listing the correct version.
- Lifecycle Controller version is not displayed in the iDRAC Web interface System Summary and System Details pages.
자세히 보기- Creating a partition from an image failed intermittently with Dell supported 8 GB SD card.
- Cannot create Certificate Signing Request (CSR) with remote and local RACADM.
- Cannot perform firmware update using the Web interface with Internet Explorer 10 browser.
- Cannot upload an SSH public key using command racadm sshpkauth if the key does not end with an "=" or "==" at the end of the key string.
- RAC serial redirect prompts for user credential when cfgSerialConsoleNoAuth is enabled.
- Power monitoring graph is not visible in iDRAC6 Web interface with Internet Explorer 10 browser.
- If the user password has (?) character, access is denied for WSMAN commands.
- In iDRAC6 express configuration console/media tab is listed in the system page. The Console/media tab must not be available in iDRAC6 express configuration.
- If
- The racadm vmdisconnect command from local and Remote racadm displays an error while disconnecting Remote File Share (RFS) attached media-"Error:No Virtual media devices are currently connected". But the media is connected through RFS before executing the command.
- In the iDRAC Web interface -> System Summary page -> Server Health section, the Power Supplies component health status displays as critical health instead of warning health in the absence of redundant power supply.
- Hardware inventory page in iDRAC Web interface displays information for two Power Supply Units (PSUs) when only one is present.
- Broadcom NIC Firmware Version in the iDRAC Web interface -> System Inventory page is not listing the correct version.
- Lifecycle Controller version is not displayed in the iDRAC Web interface System Summary and System Details pages.
버전
1.95, A00
출시일
21 2월 2013
다운로드 유형
펌웨어
범주
내장형 서버 관리
중요도
긴급Dell Technologies는 이 중요한 업데이트를 최대한 빨리 적용할 것을 권장합니다. 이 업데이트에는 Dell 시스템의 기능, 신뢰성 및 안정성을 향상시키는 중요한 버그 수정 사항과 변경 사항이 포함되어 있습니다. 또한 보안 수정 사항과 기타 기능 개선 사항을 포함할 수 있습니다.
파일 형식: MS Windows 32비트용 업데이트 패키지
파일 이름: ESM_Firmware_CMDN0_WN32_1.95_A00.EXE
파일 크기: 57.87 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
Microsoft Windows 32비트 형식의 DUP(Dell 업데이트 패키지)는 Microsoft Windows 64비트 운영 체제를 실행하도록 설계되었습니다. Microsoft Windows 64비트 형식의 DUP(Dell 업데이트 패키지)는 Microsoft Windows 64비트 운영 체제에서만 실행됩니다. 장치 드라이버 업데이트를 선택할 때 운영 체제에 적합한 업데이트를 선택하도록 하십시오.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
7365a5f803f4753ea8ff50afcae5f3a8
SHA1:
fbf108ecff8c1228b7825ffbcf7c019dcae1548a
SHA-256:
4e172fd679d3ce3d768dfa5582f55ec44eec9525121365f55a03fce11996adf9
파일 형식: 어플리케이션
파일 이름: iDRAC6_1.95_A00_FW_IMG.exe
파일 크기: 48.94 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
어플리케이션
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
85a7182437ec160bd5d457891305ed39
SHA1:
ba478d4dffcf8fd16d2e81ebbed3ca0cb92ee433
SHA-256:
a0d9cc92c7e4f7d3b45e75f7b459a7b965fb30f6d37f30fa31da9e8aa355e89a
파일 형식: 암호화 서명을 포함하는 GnuPG 파일
파일 이름: ESM_Firmware_CMDN0_LN32_1.95_A00.BIN.sign
파일 크기: 194 Bytes
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
Red Hat Linux용 업데이트 패키지용 GnuPG 서명은 상관관계가 있는 Red Hat Linux 업데이트 패키지에서 Dell의 ID를 인증하는 데 사용할 수 있습니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
d8b40bdc5b49daef7b441c68bd2594bc
SHA1:
e3a54a037ce63bd4ceb954c9b671a3ddc026bc8f
SHA-256:
19f15dc6fd79518ccc0a74a143bb11d4855c44bfcf5abfe9db63902447865e44
파일 형식: 고객에게 도움말 및 절차적 정보를 제공하는 PDF 파일의 아카이브
파일 이름: iDRAC6_1.95_A00_ReleaseNotes.pdf
파일 크기: 120.88 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 형식은 고객에게 도움말 및 절차적 정보를 제공하는 데 사용할 PDF 파일의 아카이브로 구성됩니다. 이 아카이브의 파일을 보려면 먼저 Adobe Acrobat Reader를 설치해야 합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
294eb88f5bbc3fc0638dc426e8191a4a
SHA1:
1241947106f7fed0f511472d77165294f262b314
SHA-256:
c5cf02ffbccfd1a9e52f47d31234e9e7a185b5fe6ed13b196bc6b1b16869f700
파일 형식: Red Hat Linux용 업데이트 패키지
파일 이름: ESM_Firmware_CMDN0_LN32_1.95_A00.BIN
파일 크기: 54.52 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
Linux용 Dell 업데이트 패키지는 업데이트 적용 전에 특정 검증 기준이 충족되었는지 확인하는 데 사용할 수 있습니다.
참고: Linux용 업데이트 패키지는 오픈 소스입니다. 자세한 내용은 Linux용 Dell 업데이트 패키지를 참조하십시오.
참고: Linux용 업데이트 패키지는 오픈 소스입니다. 자세한 내용은 Linux용 Dell 업데이트 패키지를 참조하십시오.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
e2b1115a4e849efd878ec7cbf5430286
SHA1:
3d81671d94f244b80dd007f7dce744fa86cf2f91
SHA-256:
4d97efb58439c9fcae6ceaf93ac688cb71887b50c565c2b20592c83123a71d50
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
해당 없음
iDRAC6
Download
1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.