Dell 180AS/2160AS Analog KVM Switch, v.1.0.3.3, A00
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
Updated firmware for the 180AS and 2160AS analog KVM switches and the supporting Server Interface Pods (SIPs).
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
Enhancement to enable recognition of PowerEdge M1000e blade server CMC module.
자세히 보기버전
1.0.3.3, A00
출시일
06 4월 2009
다운로드 유형
펌웨어
범주
디바이스 펌웨어
중요도
옵션Dell Technologies는 이 업데이트를 검토하여 시스템에 대한 적용 여부를 판단할 것을 고객에게 권장합니다. 이 업데이트에는 특정 구성에 대해서만 영향을 미치는 변경 사항이 포함되어 있거나 해당 시스템 환경에 적용될 수도 있는 새 기능이 포함되어 있습니다.
파일 형식: ZipPack 외장형
파일 이름: Dell_180AS-2160AS-Analog-KVM_A00_R173924.exe
파일 크기: 937.95 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일에는 압축된 파일 세트가 있습니다. 파일을 하드 드라이브의 폴더로 다운로드한 다음 실행(두 번 클릭)하여 파일 세트를 압축 해제합니다. 지침에 따라 설치를 완료합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
9bfd6949d776c1f02e7fba174f09289c
SHA1:
이용 불가
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
180AS/2160AS Analog KVM Switch
Instructions for Dell_180AS-2160AS-Analog-KVM_A00_R173924.exe
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
To upgrade firmware:
1. Connect the standard serial cable to a COM port on the server and to the serial connector on the back panel of the switch. Make a note of which COM port you have chosen, then turn on the switch.
2. Double-click to run the file WUpDateDELL.exe.
3. In the dialog box that displays, select the desired language and COM port.
4. Click Load. The update begins.
5. Once the firmware is updated, the following message displays: Download complete. Click Done to exit the dialog box.
6. The switch automatically reboots after the upgrade is completed.
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
To upgrade firmware:
1. Connect the standard serial cable to a COM port on the server and to the serial connector on the back panel of the switch. Make a note of which COM port you have chosen, then turn on the switch.
2. Double-click to run the file WUpDateDELL.exe.
3. In the dialog box that displays, select the desired language and COM port.
4. Click Load. The update begins.
5. Once the firmware is updated, the following message displays: Download complete. Click Done to exit the dialog box.
6. The switch automatically reboots after the upgrade is completed.