Dell CMC, v.3.03, A00
재시작 필요 자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
Chassis Management Controller (CMC) Firmware Version 3.03
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
Fixes and Enhancements in version 3.03 over 3.02
--------------------------------------
- Fix for potential issue in CMC 3.00, 3.01 or 3.02 only. There is a potential for a power fault in redundant CMC configurations during a CMC switchover or failover.
NOTE: when upgrading to CMC 3.03 in a redundant CMC configuration, you must select to upgrade either both CMCs, or the standby CMC first. Do not upgrade the active CMC first.
NOTE: for Optimal Power management of high-end configurations, it is also recommended to upgrade iDRAC firmware to 3.02 for M610, M610x, M710, M710HD, and M910 blades.
Fixes and Enhancements in version 3.02 over 3.01
--------------------------------------
- Fix for racadm testfeature command
- Fix for power-up failure on M610X after OS crash. BIOS halts system
with error "Failed to allocate sufficient blade power".
* Link tuning updates for Dell 10GbE XAUI PTM, Dell M5424-n IOM, Qlogic FC8 mezzanine card
and Brocade Superhawk2 switch
자세히 보기--------------------------------------
- Fix for potential issue in CMC 3.00, 3.01 or 3.02 only. There is a potential for a power fault in redundant CMC configurations during a CMC switchover or failover.
NOTE: when upgrading to CMC 3.03 in a redundant CMC configuration, you must select to upgrade either both CMCs, or the standby CMC first. Do not upgrade the active CMC first.
NOTE: for Optimal Power management of high-end configurations, it is also recommended to upgrade iDRAC firmware to 3.02 for M610, M610x, M710, M710HD, and M910 blades.
Fixes and Enhancements in version 3.02 over 3.01
--------------------------------------
- Fix for racadm testfeature command
- Fix for power-up failure on M610X after OS crash. BIOS halts system
with error "Failed to allocate sufficient blade power".
* Link tuning updates for Dell 10GbE XAUI PTM, Dell M5424-n IOM, Qlogic FC8 mezzanine card
and Brocade Superhawk2 switch
버전
3.03, A00
출시일
29 5월 2013
다운로드 유형
펌웨어
범주
섀시 시스템 관리
중요도
긴급Dell Technologies는 이 중요한 업데이트를 최대한 빨리 적용할 것을 권장합니다. 이 업데이트에는 Dell 시스템의 기능, 신뢰성 및 안정성을 향상시키는 중요한 버그 수정 사항과 변경 사항이 포함되어 있습니다. 또한 보안 수정 사항과 기타 기능 개선 사항을 포함할 수 있습니다.
파일 형식: 로컬 디스크로 직접 파일 압축 해제
파일 이름: CMC3.03-A00.exe
파일 크기: 30.77 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일 포맷은 하드 드라이브의 디렉토리로 압축 해제할 수 있는 파일의 아카이브로 구성됩니다. 설치는 그 이후 해당 디렉토리에서 수행할 수 있습니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
1278dea0cbe9098af8e709109a9685ad
SHA1:
이용 불가
SHA-256:
이용 불가
파일 형식: 외부 릴리스 정보
파일 이름: CMC-3.03-A00-README.txt
파일 크기: 7.74 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일 포맷은 표준 텍스트 편집기를 사용하여 볼 수 있는 일반 텍스트를 포함합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
17c863b23812abbe23a03af7c4f0f27b
SHA1:
이용 불가
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
NOTE: when upgrading to CMC 3.03 in a redundant CMC configuration, you must select to upgrade either both CMCs, or the standby CMC first. Do not upgrade the active CMC first.
Instructions for CMC-3.03-A00-README.txt:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
Instructions for CMC3.03-A00.exe
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
Instructions for CMC3.03-A00.exe
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.