Conexant D480 MDC V.92 Modem, v.HTML Manual A02, A02
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
HTML Manual for Conexant D480 MDC V92 Modem.
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
Initial Release
자세히 보기버전
HTML Manual A02, A02
출시일
18 10월 2005
다운로드 유형
HTML
범주
모뎀/커뮤니케이션
중요도
옵션Dell Technologies는 이 업데이트를 검토하여 시스템에 대한 적용 여부를 판단할 것을 고객에게 권장합니다. 이 업데이트에는 특정 구성에 대해서만 영향을 미치는 변경 사항이 포함되어 있거나 해당 시스템 환경에 적용될 수도 있는 새 기능이 포함되어 있습니다.
파일 형식: ZipPack 외장형
파일 이름: R49608.EXE
파일 크기: 5.43 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일에는 압축된 파일 세트가 있습니다. 파일을 하드 드라이브의 폴더로 다운로드한 다음 실행(두 번 클릭)하여 파일 세트를 압축 해제합니다. 지침에 따라 설치를 완료합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
Windows 2000
Windows XP
D480 MDC V.92 Modem
Custom Instructions for R49608.EXE:
1. Download the self-extracting file to your hard drive.
2. Execute the downloaded file by double-clicking on it.
3. Click Continue or OK after verifying from the pop-up window that
this User Manual is for your system.
4. Click OK to unzip the files to their default location.
If you don't like this directory, you can enter another. If the directory
does not exist, one will be created.
5. After the files have been extracted, it will launch the HTML
Manual.
6. To view the Manual again, just click on SETUP.HTM or SETUP.EXE
from the new created folder.
1. Download the self-extracting file to your hard drive.
2. Execute the downloaded file by double-clicking on it.
3. Click Continue or OK after verifying from the pop-up window that
this User Manual is for your system.
4. Click OK to unzip the files to their default location.
If you don't like this directory, you can enter another. If the directory
does not exist, one will be created.
5. After the files have been extracted, it will launch the HTML
Manual.
6. To view the Manual again, just click on SETUP.HTM or SETUP.EXE
from the new created folder.