Dell Asset Utility
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
This package provides the Dell Asset Utility and is supported on XPS Desktop, Dimension, OptiPlex and Precision models.
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
Initial Release
자세히 보기버전
2.09, 2.09
출시일
30 5월 2013
다운로드 유형
유틸리티
범주
시스템 유틸리티
중요도
옵션Dell Technologies는 이 업데이트를 검토하여 시스템에 대한 적용 여부를 판단할 것을 고객에게 권장합니다. 이 업데이트에는 특정 구성에 대해서만 영향을 미치는 변경 사항이 포함되어 있거나 해당 시스템 환경에 적용될 수도 있는 새 기능이 포함되어 있습니다.
파일 형식: 자동 압축 해제 zip 내부의 하나 이상의 자동 압축 해제 디스크 이미지
파일 이름: R109071.exe
파일 크기: 554.22 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일에는 압축된 파일 세트가 있습니다. 파일을 하드 드라이브의 폴더로 다운로드한 다음 두 번 클릭하여 파일 세트를 압축 해제합니다. 지침에 따라 설치를 완료합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
해당 없음
Floppy Disk Boot to Disk
Download
1. Click Download File, to download the file.
2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on the desktop. The Self-Extractor window appears.
3. Click Setup. An black MS-DOS window appears with a message indicating that you need 1 floppy diskettes.
4. Press the (ENTER) key. A message appears prompting you to insert a blank floppy diskette.
5. Insert a floppy disk into the floppy disk drive.
6. Press the (ENTER) key. A message appears indicating that all data on the disk will be erased.
7. Press the (y) key and then press the (ENTER) key. The files are copied to the floppy diskette. If the procedure requires more than one diskette, repeat steps 5 - 7 until you reach the end of the diskette set.
8. After all the files have been copied to the last floppy disk, press the (ENTER) key and the MS-DOS window closes.
Install
1. Insert the first (or the only) disk of the set into the Floppy drive.
2. Click Start, click Shutdown, click Restart, and then click OK. Windows XP Users need only click restart.
3. Follow the on-screen instructions.
Download
1. Click Download File, to download the file.
2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on the desktop. The Self-Extractor window appears.
3. Click Setup. An black MS-DOS window appears with a message indicating that you need 1 floppy diskettes.
4. Press the (ENTER) key. A message appears prompting you to insert a blank floppy diskette.
5. Insert a floppy disk into the floppy disk drive.
6. Press the (ENTER) key. A message appears indicating that all data on the disk will be erased.
7. Press the (y) key and then press the (ENTER) key. The files are copied to the floppy diskette. If the procedure requires more than one diskette, repeat steps 5 - 7 until you reach the end of the diskette set.
8. After all the files have been copied to the last floppy disk, press the (ENTER) key and the MS-DOS window closes.
Install
1. Insert the first (or the only) disk of the set into the Floppy drive.
2. Click Start, click Shutdown, click Restart, and then click OK. Windows XP Users need only click restart.
3. Follow the on-screen instructions.