PowerConnect,M8024-K,V4.2.1.3,A06
재시작 필요 자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
This firmware release is a maintenance release for the M8024-K version of PowerConnect switch and includes only bug fixes that are applicable to this switch or possibly other switch models as noted in the Fixes and Enhancements section.
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
This is a maintenance release so only bug fixes are included.
Fixes:
- The "show fiber optical-transceiver" command shows LOS even though link is up.
- Unable to ping with jumbo frames set.
- cpCaptivePortalWebLangCode.1.1 displays en when mib says only supported value active (1).
- LLDP Assignment of port ID for Port-Description TLV
- The CLI shows incorrect media type 10GBASE-T for fiber ports
- Can't assign a name to a VLAN.
- No default route or static showing in ip route table.
- CLI command "show dot1x users" is missing
- Missing port membership from SNMP (dot1qVlanStaticUntaggedPorts and dot1qVlanStaticEgressPorts)
- The VRPP track port priority changes in the running config.
- Firmware won't allow domain names with hyphen "-" in logging email.
- Internal ports are up during most of the switch POST.
- Continuous log message at default settings.
- DNS client error.
- VRRP Intermittent Connectivity Issues.
- VLAN membership port names not consistent in GUI.
- Sometimes switch crashes when receiving of Radius packets.
- In a Stack, the "show system temperature" CLI command breaks CLI
- QOS on port channel.
- Dropped VLAN frames are included in Discards counters.
- PC7048 Combo ports are not passing traffic.
- Order of switchport commands in running-config changed.
자세히 보기Fixes:
- The "show fiber optical-transceiver" command shows LOS even though link is up.
- Unable to ping with jumbo frames set.
- cpCaptivePortalWebLangCode.1.1 displays en when mib says only supported value active (1).
- LLDP Assignment of port ID for Port-Description TLV
- The CLI shows incorrect media type 10GBASE-T for fiber ports
- Can't assign a name to a VLAN.
- No default route or static showing in ip route table.
- CLI command "show dot1x users" is missing
- Missing port membership from SNMP (dot1qVlanStaticUntaggedPorts and dot1qVlanStaticEgressPorts)
- The VRPP track port priority changes in the running config.
- Firmware won't allow domain names with hyphen "-" in logging email.
- Internal ports are up during most of the switch POST.
- Continuous log message at default settings.
- DNS client error.
- VRRP Intermittent Connectivity Issues.
- VLAN membership port names not consistent in GUI.
- Sometimes switch crashes when receiving of Radius packets.
- In a Stack, the "show system temperature" CLI command breaks CLI
- QOS on port channel.
- Dropped VLAN frames are included in Discards counters.
- PC7048 Combo ports are not passing traffic.
- Order of switchport commands in running-config changed.
버전
4.2.1.3, A06
출시일
30 1월 2012
다운로드 유형
펌웨어
범주
네트워크
중요도
권장Dell Technologies는 다음번 예정된 업데이트 주기에 이 업데이트를 적용할 것을 고객에게 권장합니다. 이 업데이트에는 전체 시스템 상태를 유지 관리하기 위한 변경 사항이 포함되어 있습니다. 이 업데이트는 시스템 소프트웨어가 최신 상태를 유지하고 다른 시스템 모듈(펌웨어, BIOS, 드라이버 및 소프트웨어)과 호환되게 해 주며 다른 새로운 기능을 포함하고 있을 수 있습니다.
파일 형식: 편리한 수정 및 개선 사항 정보를 담은 텍스트 파일
파일 이름: PCM8024kReadMev4.2.1.3a06.txt
파일 크기: 3.57 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일 포맷은 표준 텍스트 편집기를 사용하여 볼 수 있는 일반 텍스트를 포함합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
1d294a056b4b8c89afe71481d5ea758f
SHA1:
8a5bd05f60a4fb1acb7ba8fb8d05aeb871ef2654
SHA-256:
이용 불가
파일 형식: 로컬 디스크로 직접 파일 압축 해제
파일 이름: PCM8024kv4.2.1.3a06.zip
파일 크기: 20.19 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일 포맷은 하드 드라이브의 디렉토리로 압축 해제할 수 있는 파일의 아카이브로 구성됩니다. 설치는 그 이후 해당 디렉토리에서 수행할 수 있습니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
92ee48e125e8bc9a99c58b6097c2eb19
SHA1:
f630c58b2dd135db8f2ad496513f7834b502d624
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
NOTE: Please follow software update instructions included in the zip file.
"Upgrading PowerConnect Switches from version 4.1.x.x to 4.2.1.3 firmware.pdf"
"Upgrading PowerConnect Switches from version 2.x.x.x or 3.x.x.x to 4.2.1.3 firmware.pdf"
NOTE: Release 4.2.1.3 Software zip file included with an A.1.1.9 firmware version. Only use this A.1.1.9 firmware version to upgrade switches from 3.x.x.x or 2.x.x.x to 4.2.1.3 firmware.
"Upgrading PowerConnect Switches from version 4.1.x.x to 4.2.1.3 firmware.pdf"
"Upgrading PowerConnect Switches from version 2.x.x.x or 3.x.x.x to 4.2.1.3 firmware.pdf"
NOTE: Release 4.2.1.3 Software zip file included with an A.1.1.9 firmware version. Only use this A.1.1.9 firmware version to upgrade switches from 3.x.x.x or 2.x.x.x to 4.2.1.3 firmware.
PowerConnect M8024-K
NOTE: Please follow software update instructions included in the zip file.
"Upgrading PowerConnect Switches from version 4.1.x.x to 4.2.1.3 firmware.pdf"
"Upgrading PowerConnect Switches from version 2.x.x.x or 3.x.x.x to 4.2.1.3 firmware.pdf"
NOTE: Release 4.2.1.3 Software zip file included with an A.1.1.9 firmware version. Only use this A.1.1.9 firmware version to upgrade switches from 3.x.x.x or 2.x.x.x to 4.2.1.3 firmware.
"Upgrading PowerConnect Switches from version 4.1.x.x to 4.2.1.3 firmware.pdf"
"Upgrading PowerConnect Switches from version 2.x.x.x or 3.x.x.x to 4.2.1.3 firmware.pdf"
NOTE: Release 4.2.1.3 Software zip file included with an A.1.1.9 firmware version. Only use this A.1.1.9 firmware version to upgrade switches from 3.x.x.x or 2.x.x.x to 4.2.1.3 firmware.