DX Monitor Nagios 1.0.0
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
Dell DX6000, DX Monitoring Nagios, 1.0.0
권장 사항
자동 스캔을 사용하려면 관리자 권한으로 Windows에 로그인하십시오. 관리자 권한으로 이미 로그인한 상태에서 이 메시지가 표시되었다면 재부팅하시기 바랍니다. 시스템이 IT 관리자에 의해 관리되고 있으며, 기능이 제한될 수 있습니다.
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
DX Cluster Monitoring using open source Nagios.
자세히 보기버전
1.0.0, 1.0.0
출시일
20 7월 2012
다운로드 유형
유틸리티
범주
시스템 유틸리티
중요도
옵션Dell Technologies는 이 업데이트를 검토하여 시스템에 대한 적용 여부를 판단할 것을 고객에게 권장합니다. 이 업데이트에는 특정 구성에 대해서만 영향을 미치는 변경 사항이 포함되어 있거나 해당 시스템 환경에 적용될 수도 있는 새 기능이 포함되어 있습니다.
사용 가능한 형식 중요 정보 보기
파일 형식: 이미징용 기본 드라이버
파일 이름: DXMonitorNagios1.0.0.zip
파일 크기: 12.06 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
f0670df00c60008275635737d929a46d
SHA1:
4768bed90c80b2b2773bc3b774db28b26ceff9ac
SHA-256:
a46f5eaa7125e494b6a0f4b18391e53a879da34bef5b3212e0349b28d947fe1f
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
중요 정보
This package installs and enables DX monitoring via Nagios.
지원되는 운영 체제
해당 없음
적용 대상
DX Monitoring via Nagios Version 1.0
설치 방법
DX Monitoring via Nagios Plugin install instructions. (Version 1.0.0)
Disclaimer:
The DXMonitorNagios bundle contains nagios open source packages in RHEL5 directory. The corresponding source rpms are in the SOURCES directory. Both the rpms and sources were obtained from the following locations:
http://apt.sw.be/redhat/el5/en/source/
http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS/
NOTE: DXMonitorNagios1.0.0 is supported on RHEL5.5 for the CSN2.1.1 bundle *only*.
Installation instructions:
1. Download the latest version of DXMonitorNagios package from http://support.dell.com under the DX6000 product.
2. Copy the zip file to /opt/dell directory on your CSN.
3. unzip DX Monitor Nagios zip.
# cd /opt/dell
# unzip DXMonitorNagios1.0.0.zip
4. change the directory to DXMonitorNagios
# cd DXMonitorNagios1.0.0
5. Run the DX Monitor Nagios installer
# ./DXMonitor-Nagios-install.sh
5.1 Provide your email address to receive DX monitoring notification emails.
5.2 Provide your SMTP email server address or DNS name.
5.3 The installer will install and configure DX Monitoring service using Nagios.
5.4 Once configuration is complete it will send you a test email to the email address you provided. Once you receive the email, enter 'yes' to confirm correct installation and configuration and to exit the installer program.
CONFIGURATION
NOTE: DO NOT change the preconfigured Nagios configuration files.
The DX Monitor preconfigures the Nagios web console to run on HTTP port 9090, with a default username and password of nagiosadmin and dell, respectively.
1. Enter http://localhost:9090/nagios in your web browser to login to the Nagios web console.
2. Click the Current Status -> Services tab in the Nagios web console to list and monitor all preconfigured DX Services.
3. For information on Nagios usage, click the General -> Documentation tab.
4. The installer has preconfigured all of the settings required for DX Cluster monitoring and notification. The Nagios configuration files are installed in the /etc/nagios directory.
Using DX Monitoring via Nagios:
1. Login in Nagios web console using "http://localhost:9090/nagios" address with username "nagiosadmin" and default password "dell".
2. Click "Current Status -> Services" in Nagios web console to list and monitor all DX services. DXMonitorNagios will pre configure Nagios services to monitor your DX cluster including CSN services.
3. Check DX Monitor Nagios Admin Guide for more information.
NOTE: Do NOT change the Nagios configuration files preconfigured to manage your DX cluster.
Uninstall instructions:
1. Run the DX Monitoring uninstaller to remove all packages and configuration files from the CSN.
# cd /opt/dell/DXMonitorNagios1.0.0
# ./DXMonitor-Nagios-remove.sh
Disclaimer:
The DXMonitorNagios bundle contains nagios open source packages in RHEL5 directory. The corresponding source rpms are in the SOURCES directory. Both the rpms and sources were obtained from the following locations:
http://apt.sw.be/redhat/el5/en/source/
http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS/
NOTE: DXMonitorNagios1.0.0 is supported on RHEL5.5 for the CSN2.1.1 bundle *only*.
Installation instructions:
1. Download the latest version of DXMonitorNagios package from http://support.dell.com under the DX6000 product.
2. Copy the zip file to /opt/dell directory on your CSN.
3. unzip DX Monitor Nagios zip.
# cd /opt/dell
# unzip DXMonitorNagios1.0.0.zip
4. change the directory to DXMonitorNagios
# cd DXMonitorNagios1.0.0
5. Run the DX Monitor Nagios installer
# ./DXMonitor-Nagios-install.sh
5.1 Provide your email address to receive DX monitoring notification emails.
5.2 Provide your SMTP email server address or DNS name.
5.3 The installer will install and configure DX Monitoring service using Nagios.
5.4 Once configuration is complete it will send you a test email to the email address you provided. Once you receive the email, enter 'yes' to confirm correct installation and configuration and to exit the installer program.
CONFIGURATION
NOTE: DO NOT change the preconfigured Nagios configuration files.
The DX Monitor preconfigures the Nagios web console to run on HTTP port 9090, with a default username and password of nagiosadmin and dell, respectively.
1. Enter http://localhost:9090/nagios in your web browser to login to the Nagios web console.
2. Click the Current Status -> Services tab in the Nagios web console to list and monitor all preconfigured DX Services.
3. For information on Nagios usage, click the General -> Documentation tab.
4. The installer has preconfigured all of the settings required for DX Cluster monitoring and notification. The Nagios configuration files are installed in the /etc/nagios directory.
Using DX Monitoring via Nagios:
1. Login in Nagios web console using "http://localhost:9090/nagios" address with username "nagiosadmin" and default password "dell".
2. Click "Current Status -> Services" in Nagios web console to list and monitor all DX services. DXMonitorNagios will pre configure Nagios services to monitor your DX cluster including CSN services.
3. Check DX Monitor Nagios Admin Guide for more information.
NOTE: Do NOT change the Nagios configuration files preconfigured to manage your DX cluster.
Uninstall instructions:
1. Run the DX Monitoring uninstaller to remove all packages and configuration files from the CSN.
# cd /opt/dell/DXMonitorNagios1.0.0
# ./DXMonitor-Nagios-remove.sh