Windows 2003 Driver for Dell PERC S300 Adapter, PERC S300 Integrated Modular, PERC S100 Integrated, RMSD_PERC S100 Integrated, v.2.0.0.0162, A05

재시작 필요 자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.
이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
Windows Server 2003 S100/S300 Controllers
권장 사항

시스템에 가장 적합한 다운로드 찾기

시스템의 최신 드라이버 정보를 보려면 제품 세부 정보를 입력해 주십시오.

지원 검색

Dell 서비스 태그 또는 모델 입력

제품을 찾아보고 싶으십니까? 제품 식별자를 입력해 주십시오. 방법 보기

이 드라이버는 호환되지 않음

이 드라이버는 선택한 제품에 적용할 수 없습니다. 다른 제품을 선택하여 이 드라이버에 대한 제품 세부 정보를 다시 입력하거나 제품 지원 페이지를 방문하여 다른 제품의 모든 드라이버를 확인해 주십시오.

추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.

수정 또는 개선한 내용

- Background Array Scan

- Boot to RD1000 Tape

- Consistency Check startup on existing virtual disks after a new virtual disk is created

- Default VD cache policy is changed to "No caching"

- Support for CougarPoint chipset for S100

- New System support for S300: Coaster, Diamas and Skipper, Slinky

- UEFI boot enablement
자세히 보기

버전

2.0.0.0162, A05

출시일

06 12월 2011

다운로드 유형

드라이버

범주

SAS RAID

중요도

권장
Dell Technologies는 다음번 예정된 업데이트 주기에 이 업데이트를 적용할 것을 고객에게 권장합니다. 이 업데이트에는 전체 시스템 상태를 유지 관리하기 위한 변경 사항이 포함되어 있습니다. 이 업데이트는 시스템 소프트웨어가 최신 상태를 유지하고 다른 시스템 모듈(펌웨어, BIOS, 드라이버 및 소프트웨어)과 호환되게 해 주며 다른 새로운 기능을 포함하고 있을 수 있습니다.
사용 가능한 형식 중요 정보 보기

파일 형식: MS Windows 32비트용 업데이트 패키지
파일 이름: SAS-RAID_Driver_D1RP4_WN32_2.0.0.0162_A05.EXE
파일 크기: 5.33 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
Microsoft Windows 32비트 형식의 DUP(Dell 업데이트 패키지)는 Microsoft Windows 64비트 운영 체제를 실행하도록 설계되었습니다. Microsoft Windows 64비트 형식의 DUP(Dell 업데이트 패키지)는 Microsoft Windows 64비트 운영 체제에서만 실행됩니다. 장치 드라이버 업데이트를 선택할 때 운영 체제에 적합한 업데이트를 선택하도록 하십시오.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
a6a0882b4c25c18a73f10289daeaed80
SHA1:
4a21e38611636da13cb758b6183afd9790b48e48
SHA-256:
이용 불가

파일 형식: ZipPack 외장형
파일 이름: DELL_MULTI-DEVICE_A05_R294493.exe
파일 크기: 376.84 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일에는 압축된 파일 세트가 있습니다. 파일을 하드 드라이브의 폴더로 다운로드한 다음 실행(두 번 클릭)하여 파일 세트를 압축 해제합니다. 지침에 따라 설치를 완료합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
ead1be4a2c28941abe4a8156b03c41ed
SHA1:
92575a7453c8014a22b82841f523bf87c3ba7de3
SHA-256:
7b5aaa6aa027e5f0d4b61d236559eda17f59c266d7343918a8bfc24e8db76bbd

파일 형식: 외부 릴리스 정보
파일 이름: R294493.txt
파일 크기: 4.95 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일 포맷은 표준 텍스트 편집기를 사용하여 볼 수 있는 일반 텍스트를 포함합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
0041ec6fe92e68503c3f0fde0783ca20
SHA1:
이용 불가
SHA-256:
이용 불가

다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.

기타 세부 정보

모두 표시 | 모두 숨기기
- Only a single ODD is supported as a boot device. Up to two ODDs can be supported on a system. - When installing an S300, make sure the S100 is disable in the platforms BIOS. The ODD will not function if S100 is active with S300. - W2K3 SP2 or later required for S100 and S300. NOTE! Windows 2003 R2 is not supported. - The BCRAID.SYS and BCCFG.SYS drivers both need to be updated when performing an update using the Zip Pack. Each driver is updated manually. - OM 6.2.0 or higher required to manage S100 and S300 controllers.
PERC S100 Integrated
PERC S300 Adapter
PERC S300 Integrated Modular
Dell Update Package Instructions

Download
1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

Zip Files

Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click OK to extract files. After the files are extracted the message all files were successfully unzipped will appear.
5. Click OK to exit from the installer.

Installation
1. Copy extracted files to media accessible to Windows.
2. Reboot system to Windows OS.
3. Follow Server Manager->Device Manager->Storage Controller, click on the PERC Controller.
5. Click on Update Driver Software and follow the prompts to update the driver.
4. Reboot system for changes to take effect.

드라이버 도움말 및 자습서