Dell BMC Firmware Update

재시작 필요 자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.
이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
This package provides the driver for Dell BMC Firmware Update and is supported on Enterprise Servers and Powervault models that are running the following Operating System: NA.
권장 사항

시스템에 가장 적합한 다운로드 찾기

시스템의 최신 드라이버 정보를 보려면 제품 세부 정보를 입력해 주십시오.

지원 검색

Dell 서비스 태그 또는 모델 입력

제품을 찾아보고 싶으십니까? 제품 식별자를 입력해 주십시오. 방법 보기

이 드라이버는 호환되지 않음

이 드라이버는 선택한 제품에 적용할 수 없습니다. 다른 제품을 선택하여 이 드라이버에 대한 제품 세부 정보를 다시 입력하거나 제품 지원 페이지를 방문하여 다른 제품의 모든 드라이버를 확인해 주십시오.

추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.

수정 또는 개선한 내용

Fixes
- Fixed system error status is shown in IT Assistant when hard drives are installed.
- When using ipmitool to send a chassis reset command, response is not received by ipmitool.

Enhancements
- N/A
자세히 보기

버전

1.83, A05

출시일

23 12월 2013

다운로드 유형

펌웨어

범주

내장형 서버 관리

중요도

옵션
Dell Technologies는 이 업데이트를 검토하여 시스템에 대한 적용 여부를 판단할 것을 고객에게 권장합니다. 이 업데이트에는 특정 구성에 대해서만 영향을 미치는 변경 사항이 포함되어 있거나 해당 시스템 환경에 적용될 수도 있는 새 기능이 포함되어 있습니다.
사용 가능한 형식 중요 정보 보기

파일 형식: MS Windows 32비트용 업데이트 패키지
파일 이름: BMC_FRMW_WIN_R219072.EXE
파일 크기: 4.51 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
Microsoft Windows 32비트 형식의 DUP(Dell 업데이트 패키지)는 Microsoft Windows 64비트 운영 체제를 실행하도록 설계되었습니다. Microsoft Windows 64비트 형식의 DUP(Dell 업데이트 패키지)는 Microsoft Windows 64비트 운영 체제에서만 실행됩니다. 장치 드라이버 업데이트를 선택할 때 운영 체제에 적합한 업데이트를 선택하도록 하십시오.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
3858D067398FE0CB94CA461D57871587
SHA1:
이용 불가
SHA-256:
이용 불가

파일 형식: 암호화 서명을 포함하는 GnuPG 파일
파일 이름: BMC_FRMW_LX_R219072.BIN.sign
파일 크기: 194 Bytes
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
Red Hat Linux용 업데이트 패키지용 GnuPG 서명은 상관관계가 있는 Red Hat Linux 업데이트 패키지에서 Dell의 ID를 인증하는 데 사용할 수 있습니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
F64EC40E476F7414DFB7B6DD684F033E
SHA1:
이용 불가
SHA-256:
이용 불가

파일 형식: 로컬 디스크로 직접 파일 압축 해제
파일 이름: PE840BmcA05.exe
파일 크기: 270.5 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일 포맷은 하드 드라이브의 디렉토리로 압축 해제할 수 있는 파일의 아카이브로 구성됩니다. 설치는 그 이후 해당 디렉토리에서 수행할 수 있습니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
1ae64f8d55badf7c649932054d868aba
SHA1:
이용 불가
SHA-256:
이용 불가

파일 형식: Red Hat Linux용 업데이트 패키지
파일 이름: BMC_FRMW_LX_R219072.BIN
파일 크기: 3.63 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
Linux용 Dell 업데이트 패키지는 업데이트 적용 전에 특정 검증 기준이 충족되었는지 확인하는 데 사용할 수 있습니다.
참고: Linux용 업데이트 패키지는 오픈 소스입니다. 자세한 내용은 Linux용 Dell 업데이트 패키지를 참조하십시오.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
07E93DAA6D2D16759266ED334F86C558
SHA1:
이용 불가
SHA-256:
이용 불가

다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.

기타 세부 정보

모두 표시 | 모두 숨기기
Important Information for Update Packages for Microsoft Windows
1. Do not run other applications while executing Dell Update Packages.
2.When upgrading the BMC/ESM firmware or the BP firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, the update may take up to 20 minutes to complete.
3. To speed up the time it takes to perform such updates on PowerEdge x8xx or x9xx servers, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command ""rundll32 ipmisetp.dll, RemoveTheDevice"" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command ""rundll32 ipmisetp.dll, AddTheDevice"". On PowerEdge x9xx servers, the driver can be re-installed by performing a ""Scan for hardware changes"" in the Device Manager.
4. When upgrading the BMC/ESM firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, multiple time-out warning messages from source ""IPMIDRV"" with Event ID 1004 are logged in the System Log in the Event Viewer console.
5. These messages can be safely ignored. However, to prevent the messages from being logged, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command ""rundll32 ipmisetp.dll, RemoveTheDevice"" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command ""rundll32 ipmisetp.dll, AddTheDevice"". On PowerEdge x9xx servers, the driver can be re-installed by performing a ""Scan for hardware changes"" in the Device Manager.
6. For more information on this issue, including information on the cause of this issue, see the Microsoft KB article number 912596.

Important Information for Update Packages for Linux
1. Do not run other applications while executing Dell Update Packages.
2. If the following error occurs, ""Error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory"", you must install the compatibility libraries from ""www.redhat.com"" or from the Red Hat CD. To install the compatibility libraries, use the following command: ""RPM -ih compat-libstdc++-33-3.2.3-47.3.i386.rpm""
3. Dell Update Packages for BMC, BP, ESM, and DRAC5 require the OpenIPMI driver to be loaded on your system. The current drivers can be downloaded from the Dell Support website at ""support.dell.com"".
BMC Firmware
Dell Update Package Instructions

Download

1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

Hard Drive Installation (File Extractions Only) Instructions

Download
1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Follow the remaining prompts to perform the update.

드라이버 도움말 및 자습서