Yosemite TapeWare, v.7.0_SP5C, A00
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
This is the release version of TapeWare 7.0 Service Pack 5C. This release can be applied to an existing TapeWare installation or can be installed into a new software environment provided that the user has a valid installation license key.
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
Adds support for Dell 8G servers including PE1850, PE2800, and PE2850 and includes fixes for problems discovered since the release of TapeWare 7.0 SP3A.
자세히 보기버전
7.0_SP5C, A00
출시일
13 8월 2004
다운로드 유형
애플리케이션
범주
테이프 소프트웨어
중요도
옵션Dell Technologies는 이 업데이트를 검토하여 시스템에 대한 적용 여부를 판단할 것을 고객에게 권장합니다. 이 업데이트에는 특정 구성에 대해서만 영향을 미치는 변경 사항이 포함되어 있거나 해당 시스템 환경에 적용될 수도 있는 새 기능이 포함되어 있습니다.
파일 형식: 로컬 디스크로 직접 파일 압축 해제
파일 이름: SP5C_NetWare_12587.exe
파일 크기: 1.11 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일 포맷은 하드 드라이브의 디렉토리로 압축 해제할 수 있는 파일의 아카이브로 구성됩니다. 설치는 그 이후 해당 디렉토리에서 수행할 수 있습니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
파일 형식: 소프트웨어 설치용 gnu zip 파일
파일 이름: SP5C_Linux_12587.tar.gz
파일 크기: 4.86 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 형식은 소프트웨어 설치용 gnu zip 파일로 구성됩니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
파일 형식: 고객에게 도움말 및 절차적 정보를 제공하는 텍스트 파일의 아카이브
파일 이름: SP5c_Windows_12587.exe
파일 크기: 2.88 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 형식은 고객에게 도움말 및 절차적 정보를 제공하는 데 사용되는 텍스트 파일의 아카이브로 구성됩니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
TapeWare 7.0 Service Pack 5C is the MINIMUM required version to run on DELL PE1850, PE2800, and PE2850 servers. Please choose the appropriate service pack for your operating system.
Red Hat® Enterprise Linux 2.1
Red Hat® Enterprise Linux 3
Novell Netware
Windows Server 2003
Windows NT 4.0
Windows 2000
Windows Powered
TapeWare
Custom Instructions for SP5c_Windows_12587.exe:
1. Download the file to a system running Microsoft Windows.
2. Double click the file to begin the extraction of the archive.
3. Double click the setup.exe that is extracted to begin installation of the service pack.
Custom Instructions for SP5C_NetWare_12587.exe:
Instructions for SP5C_NetWare_12587.exe
Download
1. Click the Download Now link to download the file.
2. If the Export Compliance Disclaimer window appears, click the I agree link to accept the agreement.
3. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to extract the download package.
2. Specify the location to extract the files.
3. Copy the files to a location on your NetWare server, or burn them to a CD, and load the INSTALL.NLM file on your NetWare server to complete the installation.
Custom Instructions for SP5C_Linux_12587.tar.gz:
1. Download the file and/or copy it to your Linux server where TapeWare is installed.
2. Use the following command to extract the archive:
tar -xvzf SP5C_Linux_12587.tar.gz
Mark the file as executable using the command:
chmod +x install
3. Run the extracted install script using the command:
./install
1. Download the file to a system running Microsoft Windows.
2. Double click the file to begin the extraction of the archive.
3. Double click the setup.exe that is extracted to begin installation of the service pack.
Custom Instructions for SP5C_NetWare_12587.exe:
Instructions for SP5C_NetWare_12587.exe
Download
1. Click the Download Now link to download the file.
2. If the Export Compliance Disclaimer window appears, click the I agree link to accept the agreement.
3. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to extract the download package.
2. Specify the location to extract the files.
3. Copy the files to a location on your NetWare server, or burn them to a CD, and load the INSTALL.NLM file on your NetWare server to complete the installation.
Custom Instructions for SP5C_Linux_12587.tar.gz:
1. Download the file and/or copy it to your Linux server where TapeWare is installed.
2. Use the following command to extract the archive:
tar -xvzf SP5C_Linux_12587.tar.gz
Mark the file as executable using the command:
chmod +x install
3. Run the extracted install script using the command:
./install