Dell TL2000/4000, v.9t30, A12
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
Firmware update for the TL2000/TL4000 Tape Library and drives that fix an issue where the RMU would become inaccessible.
Dell PowerVault TL2000/TL4000 Library and Drive Firmware Release A12 (September '10)and ITDT-DCR1.2.0.006
FW Revisions:
Library FW = 9T30
Drive FW:
LT03 FH drives = 93G6
LT03 HH drives = 93G7
LT04 FH drives = A232
LT04 HH drives = A233
LTO5 drives = A422
Dell PowerVault TL2000/TL4000 Library and Drive Firmware Release A12 (September '10)and ITDT-DCR1.2.0.006
FW Revisions:
Library FW = 9T30
Drive FW:
LT03 FH drives = 93G6
LT03 HH drives = 93G7
LT04 FH drives = A232
LT04 HH drives = A233
LTO5 drives = A422
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
Fixed an issue where the RMU would become inaccessible.
자세히 보기버전
9t30, A12
출시일
07 8월 2012
다운로드 유형
펌웨어
범주
테이프 자동화
중요도
긴급Dell Technologies는 이 중요한 업데이트를 최대한 빨리 적용할 것을 권장합니다. 이 업데이트에는 Dell 시스템의 기능, 신뢰성 및 안정성을 향상시키는 중요한 버그 수정 사항과 변경 사항이 포함되어 있습니다. 또한 보안 수정 사항과 기타 기능 개선 사항을 포함할 수 있습니다.
파일 형식: ZipPack 외장형
파일 이름: R282043.exe
파일 크기: 73.05 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일에는 압축된 파일 세트가 있습니다. 파일을 하드 드라이브의 폴더로 다운로드한 다음 실행(두 번 클릭)하여 파일 세트를 압축 해제합니다. 지침에 따라 설치를 완료합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
486c8689ce6fc4b1497ff7830dd7182a
SHA1:
86a1b98ea513214cc7aeaf2cc678f4bc46453a2f
SHA-256:
f8f05e78c8cca1ecded853e4885f0e6f6d05022293de1ae840ce017263637c7f
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
Dell PowerVault TL2000/TL4000 will change unique ID when the library firmware is upgraded from 5.80 or earlier to 6.60 or later. This change is a result of the IPv6 DOD implementation. As a result of the FIRMWARE upgrade the library will acquire a new IP address if set in DHCP mode; please ensure user has access to the library Operator Control Panel (OCP) in order to acquire the new DHCP address. This change will not affect libraries set for static IP addresses.
Dell PowerVault TL4000/2000 drive firmware release implemented Federal Information Processing Standards (FIPS), The LT04 and LTO5 drive firmware now contains a digital signature. Drive firmware signature is transparent to the user and backup application. The signature provides protection against firmware or device tampering; as a result a firmware upgrade to an unsigned firmware version is prohibited. If you require assistance, please contact Dell technical support.
Provides support for the new Library Controller Board (LCB)
See Dell PowerVault A07 Release Notes December'08 file for a full release details
To install ITDT, a suitable version of Java is required for both Windows and Linux.
***** LINUX INSTALLATIONS ONLY *****
The default install location for the current release of ITDT has changed in Linux based installations.
The previous destination was: /opt/dell/dvtd/jre Whereas the current default location is: /opt/dell/itdt_dcr/jre
The symbolic link creation example for ITDT in Section 2.1 of the readme file should be:
IBM JRE:
$ ln -sf /opt/IBMJava2-142/jre /opt/dell/itdt_dcr/jre Sun Microsystems JRE:
$ ln -sf /usr/java/j2re1.4.2_09 /opt/dell/itdt_dcr/jre
Dell PowerVault TL4000/2000 drive firmware release implemented Federal Information Processing Standards (FIPS), The LT04 and LTO5 drive firmware now contains a digital signature. Drive firmware signature is transparent to the user and backup application. The signature provides protection against firmware or device tampering; as a result a firmware upgrade to an unsigned firmware version is prohibited. If you require assistance, please contact Dell technical support.
Provides support for the new Library Controller Board (LCB)
See Dell PowerVault A07 Release Notes December'08 file for a full release details
To install ITDT, a suitable version of Java is required for both Windows and Linux.
***** LINUX INSTALLATIONS ONLY *****
The default install location for the current release of ITDT has changed in Linux based installations.
The previous destination was: /opt/dell/dvtd/jre Whereas the current default location is: /opt/dell/itdt_dcr/jre
The symbolic link creation example for ITDT in Section 2.1 of the readme file should be:
IBM JRE:
$ ln -sf /opt/IBMJava2-142/jre /opt/dell/itdt_dcr/jre Sun Microsystems JRE:
$ ln -sf /usr/java/j2re1.4.2_09 /opt/dell/itdt_dcr/jre
해당 없음
KIT,ACC,EN,ACTVN,TL2K,SLVR
KIT,ACC,EN,ACTVN,TL4K,SLVR
TL2000/4000
Hard Drive Installation (via WinZip) with HTML Pop-Up Window
Download
1.Click Download Now, to download the file.
2.When the File Download window appears, click Save this program to
disk (Windows XP users, click Save) and click OK. The Save In: window
appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
name icon appears on your desktop.
Install
1.Double-click the new icon on the desktop
The Self-Extractor window appears.
2.Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to
extract files to C:\DELL\DRIVERS
3.Leave all of the default settings and click Unzip or OK. If the
directory doesn't exist, you'll be prompted to create one. Click Yes. A
Self Extractor window appears and indicates C:\DELL\DRIVERS files were
extracted.
4.Click OK.
Follow the on-screen installation instructions in the window.
HTML Pop-Up With Install Now Button
1.The Dell Software Installation Documentation window appears.
2.Click the Install Now button. A File Download window appears.
3.Click Run this program from its current location and click OK.
The Security Warning window appears.
4.Click Yes. The InstallShield Wizard window appears.
5.Follow the on-screen instructions.
Download
1.Click Download Now, to download the file.
2.When the File Download window appears, click Save this program to
disk (Windows XP users, click Save) and click OK. The Save In: window
appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
name icon appears on your desktop.
Install
1.Double-click the new icon on the desktop
The Self-Extractor window appears.
2.Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to
extract files to C:\DELL\DRIVERS
3.Leave all of the default settings and click Unzip or OK. If the
directory doesn't exist, you'll be prompted to create one. Click Yes. A
Self Extractor window appears and indicates C:\DELL\DRIVERS files were
extracted.
4.Click OK.
Follow the on-screen installation instructions in the window.
HTML Pop-Up With Install Now Button
1.The Dell Software Installation Documentation window appears.
2.Click the Install Now button. A File Download window appears.
3.Click Run this program from its current location and click OK.
The Security Warning window appears.
4.Click Yes. The InstallShield Wizard window appears.
5.Follow the on-screen instructions.