HGST DK23FB-60(60GB) 모바일 HDD, v.A0C1, A02
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
Hitachi DK23FB-60 Firmware (A0C1) Fixes read error issues and improves read/write performance at certain temperature. Dell P/N (9Y273) 60GB.
- This release allows flashing of secondary master HDD and supports the following media:
- Diskette [BR64664.exe]
- Bootable Removable media (USB Flash Memory, Zip Drive, etc) [R64664.exe]
- CD-R/RW [A0C1_CD.ISO].
- This release allows flashing of secondary master HDD and supports the following media:
- Diskette [BR64664.exe]
- Bootable Removable media (USB Flash Memory, Zip Drive, etc) [R64664.exe]
- CD-R/RW [A0C1_CD.ISO].
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
Fixes read error issues and improves read/write performance at certain temperature. Dell P/N (9Y273) 60GB
자세히 보기버전
A0C1, A02
출시일
05 8월 2003
다운로드 유형
펌웨어
범주
IDE/EIDE
중요도
옵션Dell Technologies는 이 업데이트를 검토하여 시스템에 대한 적용 여부를 판단할 것을 고객에게 권장합니다. 이 업데이트에는 특정 구성에 대해서만 영향을 미치는 변경 사항이 포함되어 있거나 해당 시스템 환경에 적용될 수도 있는 새 기능이 포함되어 있습니다.
파일 형식: 로컬 디스크로 직접 파일 압축 해제
파일 이름: A0C1_CD.ISO
파일 크기: 1.79 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일 포맷은 하드 드라이브의 디렉토리로 압축 해제할 수 있는 파일의 아카이브로 구성됩니다. 설치는 그 이후 해당 디렉토리에서 수행할 수 있습니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
파일 형식: 자동 압축 해제 zip 내부의 하나 이상의 자동 압축 해제 디스크 이미지
파일 이름: BR64664.exe
파일 크기: 1.25 MB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일에는 압축된 파일 세트가 있습니다. 파일을 하드 드라이브의 폴더로 다운로드한 다음 두 번 클릭하여 파일 세트를 압축 해제합니다. 지침에 따라 설치를 완료합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
파일 형식: ZipPack 외장형
파일 이름: R64664.EXE
파일 크기: 539.2 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일에는 압축된 파일 세트가 있습니다. 파일을 하드 드라이브의 폴더로 다운로드한 다음 실행(두 번 클릭)하여 파일 세트를 압축 해제합니다. 지침에 따라 설치를 완료합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
(PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
Windows 2000
Windows XP
For Diskette:
1) Click on (BR64664.exe). This will begin the diskette creation process.
2) Follow the instructions provided.
3) Insert a blank diskette when requested.
4) Once the diskette creation is complete, restart your system with the diskette inserted. (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
5) The utility will identify your hard drive (DK23FB-60) and require you to press "Y" & "Enter" to proceed. (The utility will NOT flash an unsupported model)
7) The utility will return you to an "A:\>" when complete.
8) Remove the diskette and restart your system.
For Removable media and bootable flash memory storage devices:
*** Removable media such as Zip Drive & USB Flash Memory must already contain system files to boot to DOS ***
1) The files contained in (R64664.EXE ) should be extracted to a bootable media. The default extraction directory is C:\DELL\DRIVERS\R64664.
2) Once the files are extracted, copy the contents of C:\DELL\DRIVERS\R64664 directory to the bootable source.
3) Boot to that source. (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
4) The utility will identify your hard drive (DK23FB-60) and require you to press "Y" & "Enter" to proceed. (The utility will NOT flash an unsupported model)
5) The utility will exit and return to the prompt it was executed from when complete.
For bootable CD-ROM image:
*** CD-R/RW recording software must support *.ISO extension in order to use this image file. ***
1) Save the A0C1_CD.ISO to a known directory - recommend Desktop for easy access.
2) Start your CD-R/RW recording software software.
3) Locate the downloaded A0C1_CD.ISO.
4) Insert a blank CD-R/RW and start the recording process.
5) Restart the system and boot to the optical drive. (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
6) The utility will identify your hard drive (DK23FB-60) and require you to press "Y" & "Enter" to proceed. (The utility will NOT flash an unsupported model)
7) The utility will exit and return to the prompt it was executed from when complete.
1) Click on (BR64664.exe). This will begin the diskette creation process.
2) Follow the instructions provided.
3) Insert a blank diskette when requested.
4) Once the diskette creation is complete, restart your system with the diskette inserted. (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
5) The utility will identify your hard drive (DK23FB-60) and require you to press "Y" & "Enter" to proceed. (The utility will NOT flash an unsupported model)
7) The utility will return you to an "A:\>" when complete.
8) Remove the diskette and restart your system.
For Removable media and bootable flash memory storage devices:
*** Removable media such as Zip Drive & USB Flash Memory must already contain system files to boot to DOS ***
1) The files contained in (R64664.EXE ) should be extracted to a bootable media. The default extraction directory is C:\DELL\DRIVERS\R64664.
2) Once the files are extracted, copy the contents of C:\DELL\DRIVERS\R64664 directory to the bootable source.
3) Boot to that source. (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
4) The utility will identify your hard drive (DK23FB-60) and require you to press "Y" & "Enter" to proceed. (The utility will NOT flash an unsupported model)
5) The utility will exit and return to the prompt it was executed from when complete.
For bootable CD-ROM image:
*** CD-R/RW recording software must support *.ISO extension in order to use this image file. ***
1) Save the A0C1_CD.ISO to a known directory - recommend Desktop for easy access.
2) Start your CD-R/RW recording software software.
3) Locate the downloaded A0C1_CD.ISO.
4) Insert a blank CD-R/RW and start the recording process.
5) Restart the system and boot to the optical drive. (PLEASE MAKE SURE A/C POWER IS BEING USED WHILE UPDATING YOUR HARD DRIVE)
6) The utility will identify your hard drive (DK23FB-60) and require you to press "Y" & "Enter" to proceed. (The utility will NOT flash an unsupported model)
7) The utility will exit and return to the prompt it was executed from when complete.