TEAC DV-28EC 8X Slim DVD, v.D.4G, A02
자동 설치 완료 이 파일은 최근 업데이트의 일부로 자동으로 설치되었습니다. 문제가 발생하는 경우 수동으로 다운로드하고 재설치할 수 있습니다.이 페이지의 콘텐츠는 자동으로 번역되었을 수 있습니다. 피드백을 제공하려면 페이지 하단에 있는 양식을 작성하십시오.
This is a DOS based firmware flash utility that will update the TEAC DV-28EC DVD-ROM (Dell Part number W3131) firmware from revision D.4B or D.4E to firmware revision D.4G.
권장 사항
추가 업데이트 사항을 찾습니다. SupportAssist를 사용하여 디바이스에 대한 모든 최신 드라이버 업데이트를 찾습니다.
수정 또는 개선한 내용
Firmware D.4G
-Resolves an issue seen with imaging software where the user is able to boot to CD or DVD media but is unable to select the hard drive image on the CD or DVD media.
자세히 보기-Resolves an issue seen with imaging software where the user is able to boot to CD or DVD media but is unable to select the hard drive image on the CD or DVD media.
버전
D.4G, A02
출시일
16 11월 2005
다운로드 유형
펌웨어
범주
이동식 스토리지
중요도
옵션Dell Technologies는 이 업데이트를 검토하여 시스템에 대한 적용 여부를 판단할 것을 고객에게 권장합니다. 이 업데이트에는 특정 구성에 대해서만 영향을 미치는 변경 사항이 포함되어 있거나 해당 시스템 환경에 적용될 수도 있는 새 기능이 포함되어 있습니다.
파일 형식: ZipPack 외장형
파일 이름: R110082.EXE
파일 크기: 245.7 KB
대용량 파일입니다. 인터넷 속도에 따라 다운로드하는 데 일정 시간이 소요될 수 있습니다.
형식 설명:
이 파일에는 압축된 파일 세트가 있습니다. 파일을 하드 드라이브의 폴더로 다운로드한 다음 실행(두 번 클릭)하여 파일 세트를 압축 해제합니다. 지침에 따라 설치를 완료합니다.
다운로드의 무결성을 보장하려면 체크섬 값을 확인하십시오.
MD5:
이용 불가
SHA1:
이용 불가
SHA-256:
이용 불가
다운로드할 경우 Dell 소프트웨어 라이센스 계약 (영어로) 에 동의하는 것으로 간주합니다.
MS-DOS
Red Hat® Enterprise Linux 2.1
Red Hat® Linux 6.2
Red Hat® Linux 7.0
Red Hat® Linux 8.0
Red Hat® Linux 9.0
Novell Netware
Windows Server 2003
Windows NT 4.0
Windows 2000
Windows Server 2003 x64
Instructions for R110082.EXE
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Note: You will need to provide a bootable DOS Floppy diskette or a bootable DOS Memory Key.
This package does not contain DOS system files.
Warning! Do not power cycle system during Firmware Flash Process.
Firmware Flash Procedure
1. Copy the files extracted from the Zip package to a bootable DOS Floppy diskette or a bootable DOS Memory Key.
2. Boot to the bootable DOS Floppy diskette or bootable DOS Memory Key.
3. The autoexec.bat will initialize the firmware flash process.
4. Press the "Enter" key to begin flashing the drive.
5. When the firmware flash completes successfully remove the bootable DOS Floppy diskette or bootable DOS Memory Key.
6. Power cycle the System.
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully unzipped will appear.
5. Click the OK button to exit from the installer.
Note: You will need to provide a bootable DOS Floppy diskette or a bootable DOS Memory Key.
This package does not contain DOS system files.
Warning! Do not power cycle system during Firmware Flash Process.
Firmware Flash Procedure
1. Copy the files extracted from the Zip package to a bootable DOS Floppy diskette or a bootable DOS Memory Key.
2. Boot to the bootable DOS Floppy diskette or bootable DOS Memory Key.
3. The autoexec.bat will initialize the firmware flash process.
4. Press the "Enter" key to begin flashing the drive.
5. When the firmware flash completes successfully remove the bootable DOS Floppy diskette or bootable DOS Memory Key.
6. Power cycle the System.